Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Itsik

Pages: 1 [2] 3 4 ... 13
16
Users / Re: CIFS VFS problems with a nas
« on: July 26, 2013, 09:52:14 pm »
Hi

I've upgraded to the latest ver. that I found, which is V 1.10.
My system is the regular dvd ver.
Maybe try an update, upgrade and dist-upgrade as you suggested ? if yes, could you type the exact commands please ?

Thnx
Itsik

17
Users / Re: CIFS VFS problems with a nas
« on: July 25, 2013, 10:52:57 pm »
The latest, which is 1.08. I've upgraded it, hoping it will solve the problem but no joy ...

18
Users / Re: CIFS VFS problems with a nas
« on: July 25, 2013, 06:18:57 am »
Any ideas anyone ?

19
Users / Re: CIFS VFS problems with a nas
« on: July 20, 2013, 05:08:12 pm »
Tried it but it fails with the following:

Code: [Select]
mount error(11): Resource temporarily unavaileble
Tried to chenge the
Code: [Select]
unix extensions = no in smb.conf to yes just to see if anything changes, but no go ...

20
Users / CIFS VFS problems with a nas
« on: July 20, 2013, 09:42:28 am »
I never had this problem in 810 and the hardware is the same bit since moving to 1004, connecting my D-Link DNS-323 to the system is impossible.
My network is 1000base-t all around, with an intel card on the core and a managed trendnet switch.

Once the nas is connected and detected it gets installed correctly and the media apears in the appropriate places. But then it start to bog the system down with the following masseges:

Code: [Select]
CIFS VFS: Received no data, expecting 16384
CIFS VFS: No response for cmd 50 mid 1221
CIFS VFS: No response for cmd 50 mid 1220
CIFS VFS: No response for cmd 46 mid 1219
CIFS VFS: Send error in read = -11

I've search high and low but could not find anything that seems relevant

Any idea what could be causing this ?

Thanks
Itsik

21
Users / Re: correct web admin settings for vdpau ?
« on: July 18, 2013, 07:57:22 am »
It is happening on both GeForce - 8200 and GeForce -9300 mother board integrated GPU's that according to what I've read are supposed to be supported cards.

22
Users / Re: correct web admin settings for vdpau ?
« on: July 17, 2013, 01:06:40 am »
Is it logical for xine to take about 70% cpu with these settings?

23
Users / correct web admin settings for vdpau ?
« on: July 12, 2013, 05:51:58 pm »
Hello

What are the correct settings in the Media Director section of the web admin, for VDPAU to be utilized by Xine and are there any other actions needed to get this to work ?

Thnx

24
Users / Re: TSCHAK has a TSCHAKlet now.
« on: June 22, 2013, 08:31:10 am »
Congrats!

25
Users / Re: incoming calls are directed to ivr
« on: June 15, 2013, 06:25:01 pm »
Something new. I tried calling to hear the IVR but now, it's constantly busy, even after reboot :(

26
Users / Re: incoming calls are directed to ivr
« on: June 15, 2013, 05:18:22 pm »
Thank you for your reply.
I'v confiured it to ring all extsions in any state of the phone system.

27
Users / incoming calls are directed to ivr
« on: June 14, 2013, 08:30:52 pm »
I'm on a fresh install of 10.04 dvd. The phone seems to be setup correctly with a spa -3201 analog line adaptor. Outgoing calls work with out a problem, but incomming calls are sent directly to ivr.
Can any one with this please?

28
Users / web orbiter resolution for galaxy tab 10.1
« on: June 03, 2012, 12:09:06 pm »
What is the correct resolution to choose for the web orbiter, in order for it to display correctly on the Galaxy Tab 10.1 with out looking resizedvor streched etc.
I've tried just about anything I could think of but it lookes resized and slightly blurred

Thnx
Itsik

29
Users / Re: xine-lib and video playback issues?
« on: February 24, 2012, 07:48:22 pm »
Just installed i and it works :)

Thank you so much for your efforts.
One thing tough. I have this one MKV that did not work before, now the video works great and even the subtitles. The only thing not working is the sound (which works as usual in other videos). The receiver doesn't even pickup he stream at first. After a minutes or so it suddenly switches to DTS, but still no sound is preasent.
In the web admin, the sound card is configures as HDA Nvidia and the AC3/DTS pass thru is checked.
Is there anyway to check what's going on ?

One more question, is there any way to control the font/encoding of the subtitles ?

Thnx again.
Itsik

30
Users / Re: xine-lib and video playback issues?
« on: February 19, 2012, 11:22:17 pm »
First of all, no need to apologize and thanks for all you efforts :)
I tried what you suggested and it wants to uninstall just about everything:

Code: [Select]
root@moon49:~# apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies... Done
The following packages were automatically installed and are no longer required:
  x11-apps sg3-utils mythtv-frontend pwgen libglib1.2ldbl libconvert-binhex-perl libtext-bidi-perl libsoap-lite-perl libmtp8 liblzo1
  mythtv-common xcompmgr xfonts-scalable libemail-find-perl lsof libgtk1.2 libcrypt-ssleay-perl pluto-sdl-helpers libnet-ssleay-perl
  libfame-0.9 libclass-methodmaker-perl libxml-perl pluto-confirm-dependencies mythtv-database libhtml-fromtext-perl x11-xfs-utils toolame
  libregexp-common-perl libpvm3 mysql-server-5.0 amarok-common lmce-windowutils libxml-twig-perl libexporter-lite-perl libfftw3-3 libsgutils1
  transcode-doc beep libmyth-0.23-0 libarchive-zip-perl libsox0 libossp-uuid-perl libsdl-sge pluto-avwizard-skin-basic libmime-tools-perl
  libxml-libxslt-perl xmltv-util libossp-uuid15 libnet-domain-tld-perl lmce-mythtv-scripts xfonts-75dpi ethtool libttf2 libxml-dom-perl xinput
  pluto-libresolution pluto-x-scripts wmctrl liblog-tracemessages-perl libhtml-tableextract-perl xloadimage mysql-server alsa-utils
  msttcorefonts libnet-ip-perl libhid0 libmjpegtools0c2a libnet-dns-perl pluto-hal-device-finder libtunepimp5 libifp4 cabextract xinit pvm
  mythtv-doc libdate-manip-perl libgpod3-nogtk x11-session-utils libhttp-cache-transparent-perl libwww-mechanize-perl libiso9660-5
  flashplugin-nonfree libsox-fmt-base libfs6 libgpod-common sox xfonts-100dpi libfile-slurp-perl liblingua-preferred-perl libgtk1.2-common
  libconfuse0 libxml-xpath-perl libfcgi-perl libunicode-string-perl libxml-writer-perl libasound2-plugins libsox-fmt-alsa alsa-base
  libemail-address-perl mjpegtools xorg linux-sound-base libio-socket-ssl-perl libxml-regexp-perl libdigest-hmac-perl libemail-valid-perl
  libquicktime1 libgraphicsmagick1 libxp6 libvcdinfo0 pluto-mcr-remote libxmltv-perl libnjb5 libterm-progressbar-perl libofa0 libmpeg2-4
  libdigest-sha1-perl
Use 'apt-get autoremove' to remove them.
The following packages will be REMOVED:
  amarok amarok-engine-xine dragonplayer kubuntu-desktop libpostproc51 libxine-dev libxine1 libxine2 libxine2-dbg mythtv-backend
  phonon-backend-xine pluto-avwizard pluto-mythtv-player pluto-nvidia-video-drivers pluto-orbiter pluto-xine-player transcode xine-ui
0 upgraded, 0 newly installed, 18 to remove and 0 not upgraded.
4 not fully installed or removed.
After this operation, 146MB disk space will be freed.
Do you want to continue [Y/n]?


any idea whats next ?

thnx
Itsik

Pages: 1 [2] 3 4 ... 13