Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - Itsik

Pages: [1] 2
Users / installing mono
« on: January 01, 2014, 12:35:31 am »

I need to install mono in order to run a windows EPG grabber program, because I have no other option. But I can't find a way to do it.
I added the correct repo (badgerports) tried to run "sudo apt-get install mono" and "mono-complete" but no go. I also failed doing this thru synaptic.
Any idea ?


Users / picture viewer constantly failes to load upon reload router
« on: December 28, 2013, 10:09:40 am »
A fresh new shiny 10.04 install on trieds and proven hardware (been using it for a while).
The installation went flowless and everything seems to be working.
How ever, when ever doing a reload router, the picture viewer fails to load. Any ideas what could be causing this or what to look for ?


Users / subtitles & xinefonts
« on: December 27, 2013, 02:13:41 pm »
In 8.10 and before, in order to add xine fonts for unsupoported subtitles languages, we added the to
Code: [Select]
/opt/libxine/share/xine/libxine1/fontsThis directory no longer exists on 10.04. Creating the directory and placing the fonts there doesn't work. The only other directory I found containing xine fonts is
Code: [Select]
/opt/libxine/share/xine/libxine1/fonts, but it doesn't read them from there either.
Any idea where the LMCE xine reads it subtitles fonts form ?


Users / CIFS VFS problems with a nas
« on: July 20, 2013, 09:42:28 am »
I never had this problem in 810 and the hardware is the same bit since moving to 1004, connecting my D-Link DNS-323 to the system is impossible.
My network is 1000base-t all around, with an intel card on the core and a managed trendnet switch.

Once the nas is connected and detected it gets installed correctly and the media apears in the appropriate places. But then it start to bog the system down with the following masseges:

Code: [Select]
CIFS VFS: Received no data, expecting 16384
CIFS VFS: No response for cmd 50 mid 1221
CIFS VFS: No response for cmd 50 mid 1220
CIFS VFS: No response for cmd 46 mid 1219
CIFS VFS: Send error in read = -11

I've search high and low but could not find anything that seems relevant

Any idea what could be causing this ?


Users / correct web admin settings for vdpau ?
« on: July 12, 2013, 05:51:58 pm »

What are the correct settings in the Media Director section of the web admin, for VDPAU to be utilized by Xine and are there any other actions needed to get this to work ?


Users / incoming calls are directed to ivr
« on: June 14, 2013, 08:30:52 pm »
I'm on a fresh install of 10.04 dvd. The phone seems to be setup correctly with a spa -3201 analog line adaptor. Outgoing calls work with out a problem, but incomming calls are sent directly to ivr.
Can any one with this please?

Users / web orbiter resolution for galaxy tab 10.1
« on: June 03, 2012, 12:09:06 pm »
What is the correct resolution to choose for the web orbiter, in order for it to display correctly on the Galaxy Tab 10.1 with out looking resizedvor streched etc.
I've tried just about anything I could think of but it lookes resized and slightly blurred


Users / mobile orbiters are 0 bytes (xp orbiter .. etc.)
« on: November 10, 2011, 09:38:40 pm »
Are they posted anywhere or can someone please upload them somewhere ?


Users / Question Re. media file sync
« on: October 20, 2011, 06:42:20 pm »
For some reason, my video list shows all lmce setup videos and my photo screen saver pulles pictures from my own pic folder along side the flicker pics.
Any idea how to fix this ?


Installation issues / msttcorefonts installation problem
« on: October 24, 2009, 09:35:15 pm »
For over a month now I've been having problem with msttcorefonts package installation, which prevent the installation from completing successfully. It seems that there's a problem in d/loading the fonts them selves.
Did any one else happen to encounter this ?

Users / 0810 second hdd mounting/unmounting ...
« on: May 31, 2009, 11:50:36 pm »
I have a media hdd (fat32) on my 0810 machine. on boot, it gets mounted and stays mounted for a very short time and then disapears and doesn't come back until doing a reload router.

Ideas ?

Users / Advanced scenario programing
« on: May 23, 2009, 12:36:23 am »
I want my showtime scenario work only at night and only when I play a video or dvd (don't want it while watching TV).On top of that, I want it to wait for a minute before it turn off.

So far I've maneged to get the night part working, but nothing else works.
Has any one ever tried setting any thing even remotly resembeling what I'v described?


Users / Symbian S60 3rd Addition - follow me won't work
« on: May 20, 2009, 07:30:55 pm »
I've installed the on my N95, and after some strugle (had faulty doungle) got it to work.
Every thing seems to work fine accept for the follow me function.
I turn it on, set a video to play and then go to another room, once the phone gets detected in the new room, the media in the room I started at shuts off, but nothing happenes in the new room (accept for the massege that the phone has been detected ...).
Any idea what could be worng ?


Users / Multiple floorplans display problem
« on: April 10, 2009, 05:31:06 pm »
I have uploaded 3 floor plans, one for each story of my house. going to the on screen orbiter running UI-2+overlay, I have a button to choose each of the floor plans. The problem is that no matter which button I choose, the only visible floor plan is the first one uploaded.
The buttons do work as the hot spots change position according to the selected floor plan, but the image does not change. If I click a button repitedly, the image sometimes filckers and I can see the correct image flashing for a fraction of a second but then it goes back to the previous image. Under UI-1 it works correctly without any problems.
Does any one have any idea how to solve this ?


Users / Any expirience with OpenVPN any one ?
« on: March 14, 2009, 08:35:04 am »
I'm trying to find a way to get scure web access without a static ip. While browsing the net I found
Any one ever try this out to see if it will work with lmce ?


Pages: [1] 2