Hello all,

Does anyone know how can I change the lircd.conf to allow me to use the "More" button on my MCE USB2 remote to change tuner inputs?

Below are the contents of the current file:

#
# RC-6 config file
#
# source: http://home.hccnet.nl/m.majoor/proje...te_control.htm
# http://home.hccnet.nl/m.majoor/pronto.pdf
#
# used by: Philips
#
#########
#
# Philips Media Center Edition remote control
# For use with the USB MCE ir receiver
#
# Dan Conti dconti|acm.wwu.edu
#
# Updated with codes for MCE 2005 Remote additional buttons
# *, #, Teletext, Red, Green, Yellow & Blue Buttons
# Note: TV power button transmits no code until programmed.
# Updated 12th September 2005
# Graham Auld - mce|graham.auld.me.uk
#
# Radio, Print, RecTV are only available on the HP Media Center remote control
#

begin remote

name mceusb
bits 16
flags RC6|CONST_LENGTH
eps 30
aeps 100

header 2667 889
one 444 444
zero 444 444
pre_data_bits 21
pre_data 0x37FF0
gap 105000
toggle_bit 22
rc6_mask 0x100000000


begin codes

Blue 0x00007ba1
Yellow 0x00007ba2
Green 0x00007ba3
Red 0x00007ba4
Teletext 0x00007ba5

# starts at af
Radio 0x00007baf
Print 0x00007bb1
Videos 0x00007bb5
Pictures 0x00007bb6
RecTV 0x00007bb7
Music 0x00007bb8
TV 0x00007bb9
# no ba - d8

Guide 0x00007bd9
LiveTV 0x00007bda
DVD 0x00007bdb
Back 0x00007bdc
OK 0x00007bdd
Right 0x00007bde
Left 0x00007bdf
Down 0x00007be0
Up 0x00007be1

Star 0x00007be2
Hash 0x00007be3

Replay 0x00007be4
Skip 0x00007be5
Stop 0x00007be6
Pause 0x00007be7
Record 0x00007be8
Play 0x00007be9
Rewind 0x00007bea
Forward 0x00007beb
ChanDown 0x00007bec
ChanUp 0x00007bed
VolDown 0x00007bee
VolUp 0x00007bef
More 0x00007bf0
Mute 0x00007bf1
Home 0x00007bf2
Power 0x00007bf3
Enter 0x00007bf4
Clear 0x00007bf5
Nine 0x00007bf6
Eight 0x00007bf7
Seven 0x00007bf8
Six 0x00007bf9
Five 0x00007bfa
Four 0x00007bfb
Three 0x00007bfc
Two 0x00007bfd
One 0x00007bfe
Zero 0x00007bff

end codes

end remote

I tried adding the following to the bottom of the file, but no results.

begin
prog = mythtv
button = More
config = Y
end

Hi all,

My Bluetooth Dongle keeps adding devices, and alerting me after each one is done.   Is this normal, and if it is, is there a way to disable that feature without disabling my access to the dongle?

Thanks

Got it working.  Great work Hari!   Just one question.  How do i change the res so the menu can cover the whole screen.  I see some have been able to do, but they didn't mention how.

Thanks.

My bad.    I guess in my exuberance, I missed a step.  I don't have the jar or jad files.  I will make sure to follow all the steps before posting anymore vague errors.

Thanks.

Has anyone had any trouble getting the video going before installation?  I'm trying to get LMCE 64bit to run on my nvidia 8600 GTS, but when press enter to start the DVD install, the screen goes blank and the TV displays a no signal message.  Not sure how to proceed.

I don't have my box up yet, so I have nothing to compare your logs to.  Can someone with a system that is currently running RC1 take a look at Govo's system logs, and possibly shed some light on the problem.

befriendly,

itspac is correct, you should have some burning software already on your machine.  Look for "K3b" and should be able to burn the Quick Install DVD.  Also, do not run any updates yourself, as this tends to break LMCE.  Updates are taken care of by the LMCE automaticely.   

nebule: You may want to use the DVD as well.  I've noticed that the CD's don't always work smoothly.  I've been playing LMCE for about a year now, and I must say that there has been some vast improvements made from when I first installed it.  I would give the 710 RC DVD a try, and if you run into any problems, posts them so someone can point you in the right direction.

No luck.  I'm not sure what went wrong, but I can't get my Nokia to work. 

I'm hoping to use the Nokia as mobile orbiter/remote control, but my phone was having trouble recognizing the software file sent to my phone via Bluetooth.  I haven't tried doing it in beta 4, so I'll give it another shot, and post back with any updates.

I recently purchased the N75, and came to find out that LMCE doesn't currently support Symbian 60 v3 phones.  I read a post saying that you can use an Iphone as a Web Orbiter. I'm still within the 30 day period for returning my N75, so I was considering upgrading to the Iphone. I wanted to know if there's any chance that Pluto will support S60 v3, or should I just get the Iphone?

Thanks

Figured it out!

I just let LMCE do its thing, but I made them public drives, and made so that I choose where specific media goes.

Have you tried downloading the torrent?  That worked for me.

Helo All,

Can someone help with the mounting of my 2 xfs media drives?  I've tried using "mount /dev/sdc1/", for example,  but I get the following error:

<Begin>
mount: wrong fs type, bad option, bad superblock on /dev/sdc1,
       missing codepage or helper program, or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so
<End>

I ran dmesg and got this:

[  670.452000] XFS: unknown mount option

I realized that XFS wasn't installed so I ran sudo apt-get install xfs then tried to mount again, but receive the same messages. The only reason I've chosen to set my system up this way is so I can continue to 500gb drive for movies and 250gb for recordings with my 80gb for the system. I'd like to keep each independant.  I keep receiving messages from LMCE asking if I like to turn each media drive in to an "Internal HDD", but I'm not familiar enough with the file structure in LMCE and don't want to get myself in a hole.  If there is a way to for me to achieve my goal using the LMCE file structure, please let me know.

Thanks in advance.

Oh, my mistake.  Well great work on your part.

Awesome!!!!

I've been searching all over for a fix for this issue.  Finally, I can watch LiveTV without it freezing on me after 2 seconds.  Thanks orionsune for bringing this up in the forum and coming up with your own fix before this new fix.  LCME rocks and so do the folks on this forum.  Thanks everyone.