Messages

16

Users / Re: Leave Monitor on for OSD - problem

« on: September 19, 2010, 08:03:35 am »

Hi Paolo,

I have discretes for the on/off commands...

Power OFF:

5000 0000 0000 0001 0000 000C

Power ON:

5000 0000 0000 0001 0000 003F


Grtz,
Reint.

17

Users / Re: Leave Monitor on for OSD - problem

« on: September 18, 2010, 08:00:39 pm »

Hoi Paulo,

Sorry, very busy lately so not lurking on the forum as much...

Yes, I have a Philips PF9830

Grtz,
Reint.

18

Users / Re: Leave Monitor on for OSD - problem

« on: September 15, 2010, 08:08:51 pm »

Hi Paulo

I vaguely can remember a similar issue I had, but it has been a while since I set my tv up, so not sure if this is the same problem. But anyway, can you check if you assigned your tv to a room/the correct room?

Mine acted strangely at first, but when I assigned my tv to a room the on and off switching started working flawlessly (ever since).

Just a thought, maybe it helps,
Cheers,
Reint.

19

Installation issues / Issue with voicemail menu on diskless MDs

« on: December 31, 2009, 12:30:51 am »

Hi,

I have an issue with the voicemail menu on my diskless MDs (running 0810b2):

On my remote orbiters (web based and my N800) the voicemail menu shows up fine, but on my diskless MDs (running UI2 non alpa-blended) the voicemail menu is missing all the datafield entries. I can play them just fine, but the datafields are empty (no callerid, duration and date information)

Anyone experiencing the same? More so, anyone knows a solution?

Thx,
Bundie.

20

Installation issues / Re: UI1 orbiters stopped working after regen

« on: November 11, 2009, 03:07:59 pm »

Thx for the quick reply Thom!

It didn't work out though  But heh, it might be me, so this is what i did:

From webadmin: -> Advanced -> sqlCVS -> Update -> designer -> Check all -> next

get a popup with:

Code: [Select]

/usr/pluto/bin/sqlCVS -R 3999 -H schema.linuxmce.org -h localhost -a -n -r designer -t Array,Button,CommandGroup_D,CommandGroup_D_Command,CommandGroup_D_Command_CommandParameter,DataGrid,DesignObj,DesignObjCategory,DesignObjParameter,DesignObjType,DesignObjType_DesignObjParameter,DesignObjVariation,DesignObjVariation_DesignObj,DesignObjVariation_DesignObjParameter,DesignObjVariation_DesignObj_Skin_Language,DesignObjVariation_Text,DesignObjVariation_Text_Skin_Language,DesignObjVariation_Zone,Effect,EffectType,EffectType_Effect_Skin,FloorplanObjectType,FloorplanObjectType_Color,FloorplanType,Icon,Language,MediaType_DesignObj,RemoteMapping,Screen,Screen_CommandParameter,Screen_DesignObj,Size,Skin,Style,StyleVariation,Text,TextCategory,Text_LS,Text_LS_AltVersions,UI,Variable -d "anonymous" -U "anonymous~anonymous" -D pluto_main -e update 2>/tmp/sqlCVS-errors-1257947377.log | grep "Requesting update table" | cut -f4 -d' '

Status: success
Then I did a quick reload router, just to be sure...

then:

Code: [Select]

# /usr/pluto/bin/OrbiterGen -d 70
And it again bails out with the same error:

Code: [Select]

terminate called after throwing an instance of 'std::string'
Aborted (core dumped)
And OrbiterGen.log says:

Code: [Select]

01 11/11/09 15:03:55.404 WARNING! No variation for style: 8 <0xb5755950>
01 11/11/09 15:03:55.404 WARNING! No variation for style: 9 <0xb5755950>
01 11/11/09 15:03:55.405 WARNING! No variation for style: 10 <0xb5755950>
01 11/11/09 15:03:55.405 WARNING! No variation for style: 11 <0xb5755950>
01 11/11/09 15:03:55.406 WARNING! No variation for style: 12 <0xb5755950>
10 11/11/09 15:03:55.410 ***ERROR*** No matching style variation with 1 choices <0xb5755950>
10 11/11/09 15:03:55.411 ***ERROR*** No matching style variation with 1 choices <0xb5755950>
01 11/11/09 15:03:55.425 Warning!  Text Object: 1719 no text <0xb5755950>
10 11/11/09 15:03:55.530 Rendering screen 1255.0.0 in 70 <0xb5755950>
01 11/11/09 15:03:56.000 Failed to render screen 1255.0.0 / Cannot find a style to use for text 316 <0xb5755950>

Any mistakes I made?

Greetz,
Reint

21

Installation issues / Re: UI1 orbiters stopped working after regen

« on: November 11, 2009, 12:29:58 pm »

*Bump*

Sorry guys, I still haven't been able to resolve this issue... Anybody with some insights?

Thanx,
Reint.

22

Users / Re: Mythtv problems in 810 beta

« on: November 03, 2009, 03:35:02 pm »

Hi Purps,

On your mythfilldatabase problem: I think you should try to run it as root...

Greets,
Reint.

23

Users / Re: [solved] orbiter softphone showing sipgate as caller id for all incoming calls

« on: November 02, 2009, 10:46:12 am »

Thanx a lot!

Reint.

24

Users / Re: orbiter softphone showing sipgate id as caller id for all incoming calls

« on: November 01, 2009, 08:25:57 pm »

Hi Sky,

Solved this issue by removing option callerid from trunk.

Sky

Sorry, but could you tell me where exactly you removed the option callerid? I noticed that I have the same issue, but couldn't figure out where to remove this...

Thanx
Reint

25

Installation issues / Re: UI1 orbiters stopped working after regen

« on: October 22, 2009, 12:43:06 am »

Hi colin,

Thx for your reply.

I nosed around a little more in my logfiles and tried some manual runs of "OrbiterGen". On the webadmin page the progress of the regen for stage 1 seems fine, but as soon Stage 2 start it just keeps hanging at:

        "Regen status: Stage 2 of 2 - Rendering screen 1 of 301"

Trying manual runs of OrbiterGen bails out with:

Code: [Select]

terminate called after throwing an instance of 'std::string'
Aborted (core dumped)
And the last bit in the OrbiterGen.log is:

Code: [Select]

01 10/22/09 0:28:11.119 WARNING! No variation for style: 7 <0xb566c950>
01 10/22/09 0:28:11.119 WARNING! No variation for style: 8 <0xb566c950>
01 10/22/09 0:28:11.120 WARNING! No variation for style: 9 <0xb566c950>
01 10/22/09 0:28:11.120 WARNING! No variation for style: 10 <0xb566c950>
01 10/22/09 0:28:11.121 WARNING! No variation for style: 11 <0xb566c950>
01 10/22/09 0:28:11.121 WARNING! No variation for style: 12 <0xb566c950>
10 10/22/09 0:28:11.126 ***ERROR*** No matching style variation with 1 choices <0xb566c950>
10 10/22/09 0:28:11.126 ***ERROR*** No matching style variation with 1 choices <0xb566c950>
01 10/22/09 0:28:11.140 Warning!  Text Object: 1719 no text <0xb566c950>
10 10/22/09 0:28:11.239 Rendering screen 1255.0.0 in 148 <0xb566c950>
01 10/22/09 0:28:11.639 Failed to render screen 1255.0.0 / Cannot find a style to use for text 316 <0xb566c950>

Any hints on where I can find these style variations its complaining about, or the text number 316? Or am I again looking for the wrong clues?

Thx in advance,
Greets,
Reint.

26

Installation issues / UI1 orbiters stopped working after regen

« on: October 21, 2009, 11:42:57 am »

Hi u guys!

I'm running 0810 for a while now, with hardly any trouble. But since the latest update my orbiters got regenerated and now my UI1 orbiters stopped working. My weborbiter and N800 0rbiter are showing black screens now and are not usable anymore. I waded through the /var/log/pluto/OrbiterGen.log and found a lot of errors. Most of em along the lines of:

Code: [Select]

Error reading graphic: /usr/pluto/orbiter/skins//Basic/../../scenarios/.png

I noticed the double slashes in the path after "skins". It's obvious the script will not find the required images! Is there anything I can do to resolve this issue?

Thanx in advance,
Reint.

27

Installation issues / Re: 0810 alpha and voicemail on diskless MD's problem

« on: August 21, 2009, 11:05:51 am »

Thank you for this, I will try to roll in a fix for the future alphas.

-Thom

Great Thom,

Thx for all your efforts!

Greets,
Reint.

28

Installation issues / 0810 alpha and voicemail on diskless MD's problem

« on: August 20, 2009, 09:44:37 pm »

Hi you guys,

I took the plunge and deleted my 0710 core and have a go at the 0810 alpha install. Couple of issues I came across:

1) At first my telecom system did not work. I could make outbound calls, but all incoming calls were rejected. After some skimming through the forums I came across this post:

http://forum.linuxmce.org/index.php?topic=8486.0

the "create_pluto_dailplan.pl" file is missing a semi-column. By editting this and running the script manually now my phone system works, yeah! (thanks patricez!). So if any of the devs is reading, this is an issue still laying around (sorry, just more work for u guys)

2) Thanx to Thom for the voicemail fixes in the orbiter screens. However I found out that it works great on my Core, but on my diskless MD's it doesn't work  When I click the voicemail I wanna hear it returns a "file not found" error: "cannot play /var/spool/asterisk/voicemail/default/301/INBOX/msg0000.wav"

So how to fix this?

What i did:

- on the core edit "/etc/exports" and in the CommonDiskless section add:

Code: [Select]

/var/spool/asterisk     192.168.80.0/255.255.255.0(rw,no_root_squash,no_all_squash,sync,no_subtree_check)

- on the every MD in the house edit "/etc/fstab", and add:

Code: [Select]

192.168.80.1:/var/spool/asterisk /var/spool/asterisk nfs intr,udp,rsize=32768,wsize=32768,retrans=10,timeo=50 1 1

- on the MDs create the "/var/spool/asterisk" dir by:

Code: [Select]

# mkdir /var/spool/asterisk

Reboot the system and off I went, now I can play my voicemails everywhere in the house.

OK devs, is this the way to fix this? And should this be implemented in the future alphas? Anyways a big thumbs up for all the work you guys did.

Greets,
Reint.

29

Users / Re: Asus eee Box b202 - Monitor doesn't turn off + occasional staging

« on: August 20, 2009, 05:26:59 pm »

2. The monitor doesn't turn off (or enter sleep mode). Ever. "Leave Monitor on for OSD" is un-ticked under My Devices=> Generic PC as MD => OnScreen Orbiter. "Timeout is set to "600,600" if that has any impact. Is there a setting somewhere for this?

Hi,

maybe this thread is of help?

http://forum.linuxmce.org/index.php?topic=7441.0;topicseen

Best regards,
Reint.

30

Users / Re: Generic Sip Phone not ringing

« on: May 31, 2009, 10:34:28 pm »

Thanks, Bundie

You are correct the Generic SIP Phone wasn't checked on the settings page.  I was focusing on the Telecom -> Call routing page and then going through each user and checking to see that the phone was checked on that page.  I didn't know that the settings page existed.

I don't yet know if this fixes it.  To check it I will need to send the incoming calls to the custom route in FreePBX, but I do not know what that used to say.

Can anybody tell me what their 'custom route' says?

So, in the 'Inbound routes' page of FreePBX at the bottom in the 'set destination' section the 'custom App' box should be checked - what does it say in the box?

Thanks,
Techstyle 

Hi Techstyle,

I checked my install, but the "custom app" box is not checked and the box behind it is blank...this is not what you expected?

I'm sort of clueless with this asterisk/freepbx stuff (sorry!). I just followed this wiki page: http://wiki.linuxmce.org/index.php/VoIP_with_XS4ALL for my provider. Would your problem be solved if you delete the phoneline on the LinuxMCE admin page and start over again. I'd reckon this will reset your manual config changes in AMP/FreePBX to the defaults? Maybe someone with real knowledge can confirm this...sorry I can't be more of help.

Greets,
Reint.