Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - daballiemo

Pages: 1 [2] 3 4 ... 17
16
Users / Re: Linux MCE + Plone/Other CMS
« on: July 13, 2012, 01:39:03 pm »
MediaTomb is part of LMCE.... :D

17
Users / Re: Linux MCE + Plone/Other CMS
« on: July 13, 2012, 12:36:27 pm »
I am currently running 8.10 as a KVM VM on a HP N40L. This machine is not that powerfull as well but is good on the powerusage. The N40L is about the same price as a NAS but running it with 12.10 makes it very usable. So even if your system is not that powerfull but you have 2Gb of memory spare I would give it a go. ;D

18
Installation issues / Re: Headless 10.04
« on: April 18, 2012, 10:11:20 pm »
Just to let you know. Install headless VM based core worked out of the box.

HP N40L with 8 Gb of memory, 12.04 beta server, kvm and vm has 2 virtio nics, 75 Gb image and 2 Gb of memory

On my first md (Foxconn Netbox 330i, 2Gb memory) after booting I was presented with Sarah. After running through the setup the MD is up and running happy. Without doing anything but pressing yes, no and so on.

This is really smooth after comparing what I had to do to get this MD up and running under 8.10  :P

If you guys call this Alpha I cannot wait to see Beta  ;D

Thank to all of the developers doing such an amazing job!

kr

Han

19
Installation issues / Re: Headless 10.04
« on: April 15, 2012, 08:31:15 pm »
I do not understand what you are saying. Either you want a headless install, or you don't. A headless install will never use graphics. Setup is done on the first media director when it is first booted. Anything else is a hybrid install.

Clear  :)

rgds

Han

20
Installation issues / Re: Headless 10.04
« on: April 15, 2012, 11:50:07 am »
Pigdog,

thx for the hint. That thread I had seen as well and I tried the headless install, but headless is not really headless  :D. Headless for me is having no X-server at all and this would mean doing the initial install ie users, myth or vdr etc from somewhere else.

regards,

Han

21
Installation issues / Headless 10.04
« on: April 14, 2012, 07:12:07 pm »
Gents,

I am running 8.10 as a VM and want to start testing with 10.04. After having numerous attempts it showed out that LMCE does not like the standard KVM Cirrus card (failed to set up X), the other available cards are tits up atm, due to a problem with seabios under KVM. The last resort, Spice, has its own problem as atm spice and 12.04b server are no friends.

Is there for a headless install really no need for X, and Sarah. If so where do I start the setup??

regards Han

22
Installation issues / Re: Virtual Machines - ZEN or KVM
« on: April 13, 2012, 06:49:51 pm »
atm I am running KVM (ubuntu 1204b) on a HP N40L which is low on power. It's running my old 8.10 production vm, TVHeadEnd for recordings, a WinXP machine and 1004. Although the latest still has some problems.

kr

Han

23
Installation issues / Re: How to configure multiple hard drives
« on: April 06, 2012, 05:26:32 pm »
Make sure you do a bit of reading on bridges and stuff, to make sure u can generate the right network enviroment. I myself are running openvswitch but at the moment not to happy about its as a reboot kills the bridges and you'll have to reconfigure. Bridge-utils is the safe bet for now

24
Installation issues / Re: Snapshots, Upgrades And Latest And Greatest
« on: April 06, 2012, 05:10:43 pm »
Could you make a ticket about this?

I have made ticket 1439

25
Installation issues / Re: How to configure multiple hard drives
« on: April 06, 2012, 07:55:04 am »
You can also use 11.10 or 12.04b. Install the server version including kvm. After installation add virt-manager to be able to handle vm's, you can install lmce as a virtual machine on an image, disk etc. with virtmanager you can also add images as hdd or whole hd's to the system (after format ofcourse)

Kr

Han

26
Installation issues / Re: Snapshots, Upgrades And Latest And Greatest
« on: April 05, 2012, 07:47:10 pm »
Installed LMCE-1004-20120405032725810.iso in a VM based on KVM. Went smoothly up to the point where the system said it could not read the orbiter configuration.

ifconfig showed that the internal networkcard had an ip address of 192.168.0.1 Checking the /etc/network/interfaces files it showed that the internal network address was set to 192.168.80 instead of  192.168.80.1 Changed it via terminal login and  It's now happy generating the first screens :D

kr

Han

27
Installation issues / Re: [LMCE 10.04] When or where is MythTV started
« on: March 24, 2012, 06:05:14 pm »
Try popping into a terminal and running top,... you'll see (a) IF it's running, (b) who owns it & (c) how long it's been running.

Will have to check on my new build, i encountered some other problems as well, so i decided to rebuild.

Thx

Han

28
Installation issues / [LMCE 10.04] When or where is MythTV started
« on: March 23, 2012, 09:56:10 pm »
Hi all,

busy working on building my new 10.04 system. Still working on some minor issues, one of them being MythTV.

I am using networktuners to record and in 8.10 MythTV was started before networking was fully up which resulted in the tuners being not available untill a manual restart of MythTV was performed. I encountered this behaviour with changing the startup sequence changing MythTV from S40 to S92.

Having the same problems in 10.04, albeit some tuners do start, I was looking at which point MythTV is started. Now I cannot find MythTV in /etc/rc.* so now I am wondering how it is being started.

TIA

Han

29
Users / Re: Myth, VDR, or no TV at all...
« on: March 23, 2012, 07:52:55 pm »
MythTV with 4 networkrecorders IPTV based

30
Users / Re: LMCE 10.04 Asterisk status
« on: March 22, 2012, 08:47:45 pm »
We'll that solved itself very quickly:

The wikihttp://wiki.linuxmce.org/index.php/Cisco_7970 says:

Note for CISCO 7960 SIP users: if your phone fails to register with asterisk then edit /tftpboot/SIPDefault.cnf and append

nat_enable: 1

I did that in the beginning but somehow the SIPDefault.cnf got overwritten  ;D
I added nat_enable : 1 again and:

Code: [Select]
dcerouter*CLI> sip show peers
Name/username              Host                                    Dyn Forcerport ACL Port     Status     Realtime
200/200                    192.168.80.1                             D   N      5061     Unmonitored Cached RT
201/201                    192.168.80.134                           D   N      5060     Unmonitored Cached RT
2 sip peers [Monitored: 0 online, 0 offline Unmonitored: 2 online, 0 offline]
dcerouter*CLI>

Now I am getting somewhere

Pages: 1 [2] 3 4 ... 17