Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - sambuca

Pages: [1] 2 3 ... 31
1
Users / Re: moving files in bulk
« on: September 06, 2017, 10:15:22 am »
Not that I know of. I would probably go with moving them outside webadmin and resync.

2
Users / Re: ZWave: Fibaro Smoke Detector FGSD-02?
« on: February 25, 2016, 10:12:56 pm »
Can you post more of the log, specifically the part that lists the values of the node, example:
Code: [Select]
* Node id=21 <0xb50ffb40>
36      02/25/16 21:12:05.881             -> Values: <0xb50ffb40>
36      02/25/16 21:12:05.881              - Instance=1, class=48, index=0, label=Sensor, type=bool <0xb50ffb40>
36      02/25/16 21:12:05.881               -> Mapping value to device no 0 <0xb50ffb40>

This part of the log can usually be triggered again if needed by triple-clicking the button on the device.

regards,
sambuca

3
Users / Re: Advanced_IP_Camera => eventmethod "httpserver"?
« on: November 12, 2015, 09:27:26 pm »
Hi

1. eventInterval1 is the time between polling
eventURL1 should be the local port that the camera connects to. You will have to select an available port. Example: localhost:8773 or just 8773

2. Yes, add the port specified aboe and you should be good.


Best Regards,
sambuca

4
Installation issues / Re: Delayed events not working
« on: June 05, 2015, 08:03:24 pm »
I haven't intentionally changed anything regarding delayed events.. or rather delayed commands. Because it is the command that is delayed not the event  :)

br,
sambuca

5
Users / Re: Aeon Labs Z-Wave Multisensor
« on: May 21, 2015, 07:48:05 pm »
hi tompin2,

Are you using 1004 or 1204 ?

In 1204 the zwave has changed a lot so I would think the device mostly works out of the box.

br,
sambuca

6
Users / Re: question about internet radio
« on: March 10, 2015, 01:03:20 pm »
I can't remember who made the web admin page for radio stations (it wasn't me).

But I did complete the support for streaming audio in LMCE. Have you seen this http://wiki.linuxmce.org/index.php/Internet_Radio ("How to use" section)? This is working fine for me..

br,
sambuca

7
Users / Re: Advanced IP Camera: snaphot directory?
« on: January 29, 2015, 11:20:10 pm »
I haven't tried the Advanced_IP_Camera in this scenario, so it might not work. But I do think I added all parts to the device that the old GSD-based camera templates had, so I don't see any reason it shouldn't work the same way.
Have you linked the motion sensor to the camera properly? There is a place to do that in the web-admin.

br,
sambuca

8
Users / Re: [12.04] OpenZWave Aeon ZStick Issue
« on: January 23, 2015, 09:46:33 am »
Yes, it should try to revive dead nodes automatically now, but it is kind of an experiment really.
If it improves things, great, but it could also introduce additional delays.

br,
sambuca

9
Users / Re: ZWave sensor values ??
« on: January 18, 2015, 10:13:06 pm »
This cannot be done at the moment unfortunately. It will need some coding to get the other values into the event system. At the moment, none of those values are actually stored anywhere so we would have to think about how to solve this best.

br,
sambuca

10
Users / Re: double entries
« on: January 07, 2015, 08:22:40 pm »
You will find Logging levels in Wizard - Basic Info -> Installation.

Can you check that the file is only added to LMCE once? This is not the same as it appearing in the orbiter once, as the orbiter display is by the Title attribute. Maybe if there are multiple titles on a file, it might appear more than once in the orbiter.
But these assumptions must be verified by what you find in the web-admin.

11
Users / Re: double entries
« on: January 07, 2015, 07:41:02 pm »
It would help determine if this is a bug if you could provide the UpdateMedia log for the resynchronization. Ideally with log level 10 (LV_STATUS) enabled.

It might also be useful to see what attributes the file(s) actually have using the media file sync.

br,
sambuca

12
Users / Re: [12.04] OpenZWave Aeon ZStick Issue
« on: January 06, 2015, 09:01:13 am »
You can add a node manually using the description you wrote or from the Advanced ZWave page (under the Automation menu in the web-admin). There is no need to know the port/channel number, these are assigned by the controller when you add a new device.

br, sambuca

13
Users / Re: [12.04] OpenZWave Aeon ZStick Issue
« on: January 01, 2015, 09:23:36 pm »
tompin2,

when the lockup happens, try to unplug and replug the usb dongle - that is the simples way I have found to fix the problem once it has occured.

To prevent it from happening in the first place, a good zwave network and a powered usb hub, as phenigma also mentioned, is the key. (one or the other might do it for you - I did both and have not had any major problem since). See our zwave page for information about troubleshooting the zwave network.

br,
sambuca

14
Users / Re: CT100 ZWave Thermostat Fahrenheit vs Celcius
« on: November 29, 2014, 04:18:46 pm »
Hi.

You might need to reboot or do "sudo killall ZWave", due to the way the driver works. It's one of those things I've been trying to find a good solution for...

Br,
Sambuca

15
Users / Re: CT100 ZWave Thermostat Fahrenheit vs Celcius
« on: November 17, 2014, 08:50:35 am »
There is nothing in the template that decides what unit the temperature is interpreted as. All my devices works as expected (I also use Celsius) and I don't recall having to do anything special.  But I do think some devices has a configuration setting to toggle the unit it interprets values as - you should read the manual for your device.

br,
sambuca

Pages: [1] 2 3 ... 31