did you do the MD upgrades via chroot? or on the actual machines themselves?
-Coley.

i hope to get this done on the weekend.

Did you get any further with your script?
Last time I tried the MD upgrade it took an eon - and even with that don't recall it completing successfully.
Anything specific I can try?

-Coley.

One of my dimmers now appears as an option to monitor/graph energy usage. I didn't do anything to it since.
-Coley.

Anyone that knows how to drop the database and start from scratch??

That would be here: http://wiki.linuxmce.org/index.php/User:Phenigma#Re-initialize_the_Media_Database

-Coley.

Btw, howto setup a MD when Core is running on the same Machine/VM?

When you set up your core VM ensure 2 nics, the first set up as NAT, and the second on the Internal network provided by the VM.
Then set up a 2nd VM for an MD with no HD and one nic on the Internal network. I don't know what you use for running your VMs but you'll need to specify this MD boots from the Network.

-Coley.

Upgrade of the MD not so successful, log here http://paste.ubuntu.com/5674981/
I'm left with an MD attempting to start KDE desktop and failing.

-Coley.

now I'm finding it will not down load software for new devices. Well at least for oneWire.

Any incites there?

Thanks

Phenigma may not have *all* of the lmce debs up for armhf, or there may be missing raspbian debs either.
-Coley

:-) ...

link above the code block...
http://dokuwiki.knallimall.org/de/linuxmce_macmini_2010_4_1/linuxmce_1204_upgrade_script

thx
Tested this on a 10.04 final VM, worked without intervention and orbiter appeared on 12.04.2.
When you ask about upgrading an MD - do you want the script run on the MD? or rebuild the image under webadmin of the upgraded core?

-Coley.

Oh, try the aplay command again, but this time with sudo

Code:

sudo aplay -l

might get a bit more info
I use linuxmce so don't know the finer differences between Dianemo and lmce here.

-Coley.

That shows you have no squeezeslaves running on your core. In my setup I have two zones set up and as a result have two slaves running. Here is the output on my system:

Code:

coley@dcerouter:~$ ps aux | grep squeezeslave
root      9637  0.0  0.2  60248  6336 ?        Ssl  Mar22   8:03 /usr/bin/squeezeslave -o0 -m 00:04:20:16:4c:6c -r5 -M/var/log/squeezeslave_0.log
root     18807  1.2  0.1  51432  6160 ?        Ssl  Mar23 189:59 /usr/bin/squeezeslave -o1 -m 00:04:20:16:4c:6b -r5 -M/var/log/squeezeslave_1.log
coley    20414  0.0  0.0   3344   904 pts/0    S+   08:56   0:00 grep --color=auto squeezeslave

Can you double check the steps you took match the wiki?
what is the output of

Code:

aplay -l

on your core?

-Coley.

I'll get my quill and quire
-Coley.

next round...
http://dokuwiki.knallimall.org/de/linuxmce_macmini_2010_4_1/linuxmce_1204_upgrade_script?&#the_script

I had switch of my computer after upgrade using the power button! ... "reboot" command wasnt found anymore ....

Is there a direct link to the script that I can just wget it? without having to fire up a browser and copy/paste it?

thanks,
-Coley.

what is the output of

Code:

ps aux | grep squeezeslave

on your core when you have the squeezeslaves set up?

-Coley.

Diskless_CreateTBZ.sh is not currently finishing on 1204, this will need to be looked at before 1204 MDs can be created.

J.

Currently failing trying to install xine-ui, pluto-orbiter won't install as a result.
It's listed in packages for 1204 but I'll need to check why its not installing.

-Coley.

Just to add VM MD booted and ran AVWiz successfully.
Currently downloading pkgs for MD.

-Coley.

Um... maybe a bit too fast to report there - MD is 10.04 based.