Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - poyon

Pages: [1] 2 3
1
Installation issues / Re: upgrade from 710 to 810 beta
« on: October 25, 2009, 08:18:18 pm »
And is a DVD installation will erase all my disk? Or Can I chose the partition on which I want to install?

THanks

2
Installation issues / Re: upgrade from 710 to 810 beta
« on: October 24, 2009, 11:10:21 pm »
ok thanks :-)

3
Installation issues / upgrade from 710 to 810 beta
« on: October 24, 2009, 08:59:44 pm »
Dears,

Is it possible to upgrade from 710 to 810 beta?
My 710 install is on one disk only so I don't want to move all my /home directory before installing 810.

Thanks

4
Users / Re: md not starting
« on: October 03, 2009, 11:24:04 pm »
Ok it is working a little better after editing the r8169.c manually

but now I have this message :

Diskless setup failed but maybe is it because the core detected on AMD64 structure and my CORE is i386?
I will search in the wiki...

Thanks all for your help

5
Users / Re: md not starting
« on: October 03, 2009, 08:07:24 pm »
When I am following the WIKI I am blocked here :

Apply this patch:
patch < r8168.diff

 --- drivers/net/r8169.c.orig   2008-09-05 17:07:29.000000000 +0300
 +++ drivers/net/r8169.c        2008-09-04 23:49:51.000000000 +0300
 @@ -162,7 +162,7 @@
        { PCI_DEVICE(PCI_VENDOR_ID_REALTEK,     0x8129), 0, 0, RTL_CFG_0 },
        { PCI_DEVICE(PCI_VENDOR_ID_REALTEK,     0x8136), 0, 0, RTL_CFG_2 },
        { PCI_DEVICE(PCI_VENDOR_ID_REALTEK,     0x8167), 0, 0, RTL_CFG_0 },
 -      { PCI_DEVICE(PCI_VENDOR_ID_REALTEK,     0x8168), 0, 0, RTL_CFG_1 },
 +      //{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK,   0x8168), 0, 0, RTL_CFG_1 },
        { PCI_DEVICE(PCI_VENDOR_ID_REALTEK,     0x8169), 0, 0, RTL_CFG_0 },
        { PCI_DEVICE(PCI_VENDOR_ID_DLINK,       0x4300), 0, 0, RTL_CFG_0 },
        { PCI_DEVICE(0x1259,                    0xc107), 0, 0, RTL_CFG_0 },


I have this error :

Apply this patch:
patch < r8168.diff

 --- drivers/net/r8169.c.orig   2008-09-05 17:07:29.000000000 +0300
 +++ drivers/net/r8169.c        2008-09-04 23:49:51.000000000 +0300
 @@ -162,7 +162,7 @@
        { PCI_DEVICE(PCI_VENDOR_ID_REALTEK,     0x8129), 0, 0, RTL_CFG_0 },
        { PCI_DEVICE(PCI_VENDOR_ID_REALTEK,     0x8136), 0, 0, RTL_CFG_2 },
        { PCI_DEVICE(PCI_VENDOR_ID_REALTEK,     0x8167), 0, 0, RTL_CFG_0 },
 -      { PCI_DEVICE(PCI_VENDOR_ID_REALTEK,     0x8168), 0, 0, RTL_CFG_1 },
 +      //{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK,   0x8168), 0, 0, RTL_CFG_1 },
        { PCI_DEVICE(PCI_VENDOR_ID_REALTEK,     0x8169), 0, 0, RTL_CFG_0 },
        { PCI_DEVICE(PCI_VENDOR_ID_DLINK,       0x4300), 0, 0, RTL_CFG_0 },
        { PCI_DEVICE(0x1259,                    0xc107), 0, 0, RTL_CFG_0 },

6
Users / Re: md not starting
« on: October 01, 2009, 09:51:01 pm »
I have follow the Wiki for r8168 but now when I am booting the MD I have a message :

Kernel Panic .... nothing to configure
unable to open /tmp/eth0......


7
Users / Re: md not starting
« on: October 01, 2009, 08:03:17 pm »
ah ok thanks.

did someone know when the 810 will be avalaible.

8
Users / Re: md not starting
« on: September 30, 2009, 11:02:04 pm »
thanks I will try the wiki guide.
Why is the Realtek 8168 causing problem? Is it because I am under 710? under kubuntu 9.04 it is ok.


9
Users / Re: md not starting
« on: September 29, 2009, 08:35:32 pm »
My eth0 is a Realteck RTL 8680? I think but not sure.
It is a Shuttly X27D without HDD.

10
Users / md not starting
« on: September 27, 2009, 08:13:45 pm »
Hello,

I have installed LMCE710 and I am trying to boot a diskless MD (micro ATX shuttle PC)

The TFTPBOOT is ok. I can see booting but after I see ETH0 : Link down and nothing happened anymore.

Can someone help me please?

Thanks.

11
Installation issues / Re: upgrade to RC1 from BETA
« on: May 01, 2008, 01:20:09 pm »
Hello,

I am trying to upgrade from internet but I have this message?

--13:15:34--  ftp://upgrade.linuxmce.com/Upgrade//upgrade-0704-to-0710.tar.gz
           => `/var/gutsy-upgrade-scripts/upgrade-0704-to-0710.tar.gz'
Resolving upgrade.linuxmce.com... 65.49.28.85
Connecting to upgrade.linuxmce.com|65.49.28.85|:21... connected.
Logging in as anonymous ...
Login incorrect.

Press ENTER to return to menu

12
Installation issues / upgrade to RC1 from BETA
« on: April 26, 2008, 10:45:04 pm »
Hello,
Is it possible to upgrade from BETA to RC1?
As I am using the CORE/Hybrid as personal PC also I don't want to loose all my personal doc and setting.

Thanks.

13
Users / add X10 CM11A in lMCE710
« on: February 05, 2008, 11:58:54 pm »
Hello,

I am trying to integrate a CM11A to control my light module with LinuxMCE.

I added the CM11A in interface and the parnet is the CORE.
It don't work. This is the message in the log of CM11 :

10      02/05/08 23:48:20.213           Receive string: MESSAGE 82             <0xb70f0b90>
10      02/05/08 23:48:20.213           Received MESSAGE 82             0x806ca10 device: 19 <0xb70f0b90>
10      02/05/08 23:48:20.213           Received Message type 1 ID 760 from 0 to 19 (device: 19) resp 0 <0xb70f0b90>
10      02/05/08 23:48:20.214           Could not find a handler for message - from 0 to 19 Type: 1 ID: 760 (device: 19) Command_Impl1 Dev #19 <0xb70f0b90>


14
Installation issues / Remote controle of md
« on: February 02, 2008, 11:57:46 pm »
Hello,

I have installed LMCE 710B3 and a MD in diskless with USBUIRT. I have a look of remote but I don't know how to make one of them works with my md?
What is the procedure?
I have a universal remote from Marmitek (which works with my TV and my X10).

Thanks

15
Installation issues / Re: Linux MCe 0710
« on: December 03, 2007, 01:23:05 pm »
ok great it is soon then.
Thanks.
Is someone already hads this problem is HDD detection on 0704?

Pages: [1] 2 3