Is the rest of your network on a 192.168.80.X? do you have eth0 set to use dhcp to configure its network settings or did you set them manually?

It is set up to use DHCP to configure the network.

It's a typical single NIC setup problem I reckon.  Either use two NICs as it was intended or configure the external NIC manually.

Being that I am somewhat inexperienced with setting up network protocol are there any common steps I could use to get my Internet back and just forget the thin client for now?

Here is the output:

eth0      Link encap:Ethernet  HWaddr 00:0D:56:D8:3E:DB
          inet addr:192.168.80.241  Bcast:192.168.80.255  Mask:255.255.255.0
          inet6 addr: fe80::20d:56ff:fed8:3edb/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1571 errors:0 dropped:0 overruns:0 frame:0
          TX packets:22518 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:564282 (551.0 KiB)  TX bytes:1487627 (1.4 MiB)
          Base address:0xdec0 Memory:fcfe0000-fd000000

eth0:0    Link encap:Ethernet  HWaddr 00:0D:56:D8:3E:DB
          inet addr:192.168.80.1  Bcast:192.168.80.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Base address:0xdec0 Memory:fcfe0000-fd000000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:21215 errors:0 dropped:0 overruns:0 frame:0
          TX packets:21215 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:3344162 (3.1 MiB)  TX bytes:3344162 (3.1 MiB)

So I have been testing LMCE for a few weeks now and so far it is working out pretty well. That is except when I set up a thin client. I can get the thin client to load with minimal effort and it works nicely. But soon after I loose internet connection from both the client and the core. I remember reading somewhere that some people prefer using 2 Ethernet cards when using thin clients. I assume one as a gateway and the other to manage the clients. I don’t know if that has anything to do with my problem or not. As it seems I am unable to even log into my router at this point. I get a timed out error.

First, I moved the flickr.pl to flickr.pl.back.

Where is the flickr.pl located?

Thank you  I will take a look.

Just wondering if there is any major difference in the end result when using the Live DVD vs the 2 CD's. Is there any benefit or drawback to using one or the other?

I was wondering is there a way to change the pic feed from flickr to my own pics? I tried copying my pics to the public data picture folder but I still cannot get any to come up with my pics in place of some of the flickr images. I can pull them up if I go to view my pics through LMCE when I go to the pictures menu.

When Trying to make changes I am using the original User that was created during the setup wizard. I still cannot make changes. Now I know that during my initial setup I chose a different name for my user first but I hit the back button in the wizard and changed it to something else.  Perhaps for some reason that messed up my User settings? I tried to log in using the original name I started with before I changed it but it came up as an invalid user.

As far as the moving files problem I was having, I managed to work around it by changing the read write permission for the directory.

 
Ok so I am a newbie to LMCE and KDE but not a complete newbie to Ubuntu or Xubuntu desktops.
Every time I try to make changes on my LMCE admin web page I get an error stating that I am not authorized to make the change. For example, I tried to apply a software install and I got this:
 “You are not authorized to modify installation.”

Also when I tried adding music files to my media audio folder the desktop will not allow me to drag the files to the directory that would like.
Is there some kind of login security setting I need to change?