Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - slampt

Pages: 1 2 3 [4] 5 6 7
Users / AUS HDHomerun EPG
« on: October 13, 2010, 01:59:36 pm »
Hey All,

I have got a couple of the HDHomeruns and was wondering how do you get the EPG stuff in Australia to work, I was trying to do it using oztivo via the setup but it kept trying to run /usr/bin/tv_grab_ar

Any help would be appreciated.


What Posde said :P

Nah, I hardly spent much time on it, I just grabbed the code that mihajzm submitted and made a few changes.
So far I find it way more responsive than the native one. Where is the source for the native one? I can't find it in SVN.


I have been developing on my n810, I have made some slight changes too the mini2440 code to get it to work nicely on the n810 (so far so good).
Now I just need to build the deb package.  I will tidy up a few things then submit it to track so someone can add it to the svn (if they like).


Hey Coley

I don't suppose you could upload what you have done re: n800 to SVN, I am playing with the source for the mini2440 by mihajzm but as your previous post indicates you have already started to create the deb package. Otherwise I will continue with what I am doing :)


Installation issues / Re: 810 internet install failed
« on: February 14, 2010, 03:19:19 am »
I too had this problem the other day using the net install.
I haven't done any research yet as to why but I will tomorrow.


Developers / Re: [Solved] Dealextreme (cheap) IP Camera help
« on: February 10, 2010, 03:48:18 am »
Sorry Kooma,

I have been rather busy so haven't had time to reply.
I basically created a GSD using one of existing templates as a guide.
I have tried submitting the Templates but have yet to hear from anyone about it being accepted or not.

If you get stuck let me know and I will try and write something up when I get home from work.


Users / Re: DS9490R 1-wire interface. Is it working? Anyone using one?
« on: February 03, 2010, 09:10:13 am »
When do you think it would of become corrupt, I have copies of MCE dating back a fair bit.


Users / Ducted Aircon integration
« on: February 01, 2010, 04:43:06 am »
Hi all,

I was just wondering if anyone (in AU) has looked into integrating ducted aircon with their LMCE setup?
I am looking at both evap and reverse cycle (Evap is all or nothing and Reverse Cycle is Zoned).

I have been looking at the Z-WAVE Thermostats available in the USA but I can not figure out if that would work as a drop in replacement here, and if it can what modules it would support.


Developers / Re: [Solved] Dealextreme (cheap) IP Camera help
« on: January 02, 2010, 01:03:22 pm »

I have just updated the wiki with the working ruby code, but Plugnplay still doesn't work.

I have also updated a section for another cheap DX camera (IP-400)



Developers / Re: [Solved] Dealextreme (cheap) IP Camera help
« on: December 31, 2009, 04:19:46 am »
Just an update,
I quickly tested the code, but for some reason the auth part isn't working.
If I telnet to the Camera and run it manually like so

telnet 80
GET /cgi-bin/action?action=snapshot HTTP/1.0
Accept: */*
Authorization: Basic "YWRtaW46YWRtaW4="

HTTP/1.0 200 OK
Date: Tue, 03 Apr 1984 01:53:38 GMT
Server: Boa/0.94.14rc18-ipcam
Accept-Ranges: bytes
Connection: close
Saved 33156 bytes to /tmp/s/snapshot.jpg.
Content-type: image/jpeg
Content-Length: 33156


But if I try and view the image through the linuxmce web admin, tcpdump shows this.

14:18:50.480366 IP dcerouter.35688 > P 1:103(102) ack 1 win 92
@.@.F3..P...P..h.PU.:.|...P..\....GET /cgi-bin/action?action=snapshot
Accept: */*
Authorization: Basic YWRtaW46YWRtaW4=

14:18:50.481030 IP > dcerouter.35688: . ack 103 win 2920
14:18:50.489427 IP > dcerouter.35682: . ack 2 win 2920
14:18:50.489958 IP > dcerouter.35682: F 1:1(0) ack 2 win 2920
14:18:50.489987 IP dcerouter.35682 > . ack 2 win 92
14:18:50.491760 IP > dcerouter.35688: P 1:181(180) ack 103 win 2920
E...p.@.@..$..P...P..P.h|...U.;.P..h~F..<HTML><HEAD><TITLE>401 Unauthorized</TITLE></HEAD>
<BODY><H1>401 Unauthorized</H1>
Your client does not have permission to get URL /cgi-bin/action from this server.

As mentioned I have pasted the Code to the wiki, any help would be great.  I didn't have this problem when I first created the template, but for some reason I do now :(


Developers / Re: [Solved] Dealextreme (cheap) IP Camera help
« on: December 31, 2009, 02:03:38 am »
Ok I have added the code that "should" work to the wiki

I haven't tested it yet because I don't have the cameras with me at the moment.  Will get them back next week some time.  I also have a handful of other stationary/dome style cameras I want to try and test too.


Users / Re: Finally, Z Wave in Australia
« on: December 31, 2009, 01:32:40 am »
I had a quick chat with the other day, they have started shipping them, and a few people have ordered (from what they tell me).
They also expect to have some in wall dimmers etc available in the new year!


Users / Re: Finally, Z Wave in Australia
« on: December 22, 2009, 02:03:14 am »
That's hot!
I can't wait to get me some of that gear! :P
Hopefully they will release thermostats too!


Users / Re: Certain MKVs not working
« on: October 15, 2009, 04:22:08 am »
Have you tried renaming the file to .m2ts and changing its meta data type to LinuxMCE Bluray Disc... this will cause mplayer to play it instead... although you won't be able to pause, rewind, etc.

Sorry for the delay Colin, I have tried the above, this trick used to work for me in 0710, but I haven't been able to get it to work in 0810.
I will have to investigate more, I don't think mplayer is actually getting called when I try this.
ATM I am just jumping into KDE desktop and running mplayer from the cli (the the mkvs work when I do this) :)


Users / Certain MKVs not working
« on: October 04, 2009, 02:14:14 pm »
Hey all, not sure if anyone can help here (this is a xine issue I think).
I have some mkvs (legacy) from when I used another media platform. However I can not seem to get them to play with Xine.
The error I get is
ebml: read error

If I crank up KDE desktop I can get it to work under Mplayer, unfortunately the little trick of renaming it to *.evo doesn't seem to work under 810 anymore. Anyone with xine clue able to lend a hand?


Pages: 1 2 3 [4] 5 6 7