Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - slampt

Pages: [1] 2 3 ... 7
1
Users / Re: Intel NUC
« on: March 27, 2013, 01:13:53 pm »
Ok with a little assistance from the Unrecognized Nic wiki entry and the latest src for the e1000e from http://sourceforge.net/projects/e1000/files/?source=navbar I have managed to create a new MD, the NUC boots, and I am presented with Failed to setup X.

I will now try to compile the modules for the intel graphics card HD 4000 :P

Slampt

2
Users / Re: Intel NUC
« on: March 25, 2013, 03:25:43 pm »
Hey Guys,

Just  borrowed one of these to give it a shot, firstly I tried to PXE boot it as an MD, it unfortunately kernel panics;

Kernel Panic - not syncing: Attempt to kill init!
Pid: 1, comm: init Not tainted 2.6.32-44-generic #98-Ubuntu

Any ideas?

3
Users / Re: lmce 1004 and MythTV
« on: March 23, 2013, 04:14:44 pm »
Sorry Posde,

Here it is;


dcerouter_1032070:/var/log/mythtv# ls -la /mnt/device/65/public/data/pvr/
total 12
drwxrwsrwx 3 root public 4096 2013-03-23 18:27 .
drwxr-xr-x 8 root public 4096 2012-05-16 00:40 ..
drwxrwsr-x 2 root public 4096 2013-03-23 17:56 livetv
-rwxrwxrwx 1 root public    0 2013-03-23 23:06 livetv.folderlock



dcerouter_1032070:/var/log/mythtv# ls -la /mnt/device/65/public/data/pvr/livetv
total 478884
drwxrwsr-x 2 root   public      4096 2013-03-23 17:56 .
drwxrwsrwx 3 root   public      4096 2013-03-23 23:13 ..


4
Users / Re: lmce 1004 and MythTV
« on: March 23, 2013, 10:48:51 am »
Hey Guys,

Sorry to dig up an old thread, I thought it would be better to reply to this one than start a new one.
I finally got around to installing my HDHomerun DVB-T. I had to scan for the channels manually but after that, I seem to be getting the same permissions error.


2013-03-23 17:36:55.483 TFW, Error: Opening file '/mnt/device/65/public/data/pvr/livetv/1007_20130323173654.mpg'.
         eno: Permission denied (13)
2013-03-23 17:36:55.527 TVRec(1) Error: RingBuffer '/mnt/device/65/public/data/pvr/livetv/1007_20130323173654.mpg' not open...
2013-03-23 17:36:55.618 TVRec(1) Error: CreateLiveTVRingBuffer() failed
2013-03-23 17:36:55.685 TVRec(1) Error: Failed to create RingBuffer 1
2013-03-23 17:36:55.768 TVRec(1): Changing from WatchingLiveTV to None
2013-03-23 17:36:55.646 ProcessPAT: Program not found in PAT.
         Rescan your transports.

Permissions are;

drwxrwsr--  3 root public 4096 2013-03-23 17:41 pvr


Any help would be appreciated..

Cheers
Slampt


5
Users / Re: Intel NUC
« on: March 17, 2013, 09:20:33 am »
Thanks,  I might give one a go and see how it fairs.
Should use a lot less power than my current clunker (core2duo)
The only think I was concerned about was the graphics, intel HD 4000.

Cheers
Slampt

6
Users / Intel NUC
« on: March 17, 2013, 02:56:21 am »
Hey all,

Just wondering if anyone has tried using an intel nuc for an MD?
I was going to look at using one as a core, however it would require a USB Ethernet adapter.
Keen to hear others thoughts on this?

Cheers
slampt

7
Users / Re: In-wall touch screen
« on: January 18, 2013, 10:42:31 am »
Yup,

POE from my switch stepped down to 5v.
When they launched the Touchpad here it was around the same time they decided to pack it in so I picked up mine for $99

Cheers
Slampt

8
Users / Re: In-wall touch screen
« on: January 18, 2013, 10:18:56 am »
Ok ok! :P

Dirty hacks so far but nothing a little plaster/paint wont fix :P

http://www.slampt.net/wp-content/uploads/2013/01/IMG_6909.jpg

9
Users / Re: In-wall touch screen
« on: January 17, 2013, 09:19:37 am »
Hey Jamo,

Just thought I would chime in here, I have a HP Touchpad mounted in my wall. I use a Modified USB cable to a POE Step down convertor that then plugs into my Switch.
It works rather well running android. I have just upgraded to CM10 as qOrbiter is meant to be a little bit more stable on it. So far I think the Linuxmce Orbiter posted here: http://forum.linuxmce.org/index.php/topic,13064.0.html is a little more reliable.

I will post pics later if interested.

Slampt

10
Users / Re: LinuxMCE community, lets talk.
« on: November 11, 2012, 04:22:10 am »
How about a way to import a backup pre-wizard?

11
Users / Pioneer Receivers RS232 On issue work around.
« on: October 30, 2012, 06:36:05 pm »
Hey All,
This is just an FYI for anyone else who has a Pioneer receiver and wants to control it via RS232.
I have a VSX-23 and found that no matter what I did I couldn't get it to turn on using an Orbiter. Turns out you must first send a <CR> wait 100ms Then issue the on Command.
So I had to change the Power on Code in A/V Properties to

<$"\r\s100m\rPO\r"$>
sleep(5)

Cheers
Slampt

12
Users / Re: Android QOrbiter
« on: July 26, 2012, 07:04:53 am »
Just an update in the hopes someone may be able to help me.
I have been trying to figure out why qOrbiter would work when it is freshly installed (config changed to suit my setup). But fail every time after...

These are my logs;

Success start : http://pastebin.com/raw.php?i=ss2t5bhQ

When pressing Exit Orbiter : http://pastebin.com/raw.php?i=JDp1idZd

Failed start : http://pastebin.com/raw.php?i=4TAvQUBs

I will keep plodding away and report here if I am successful :P

Cheers
Slampt

13
Users / Re: Android QOrbiter
« on: July 25, 2012, 04:15:26 pm »
Just wondering if anyone has got this working on a HP Touchpad w/ android (CM9)?
I have just got my touchpad back, and have been trying to get it to work but to no avail :/
Trying to get debug logs out of it now..

Slampt

14
Users / Ubiquiti Aircam
« on: June 13, 2012, 02:15:17 pm »
Hey All,
Not sure if anyone would be interested in this, but a friend an I have been writing a GSD for the Aircam.

So far this is what we have (it is functional, sort of).

http://pastebin.com/UsYtfgMs

For the most part we just replicated the settings for the Axis Camera but the Get Video frame is different (as above).
We did have to install libwww-mechanize-ruby and add a new parameter for the IP Address because we couldn't figure out how to extract that easily. Device 229 on my system.
Any feedback / advise to make it better would be appreciated.
FWIW the air cams use cookies. If Y'all don't mind I will make a wiki entry.

Cheers
Slampt

15
Users / Re: USB UIRT IR Issues!
« on: December 30, 2011, 05:25:21 am »
I still can't seem to figure this out, any advise/ideas would be greatly appreciated!
Rebuilt the image for the MD and still getting the same problem :(

Cheers
Slampt

Pages: [1] 2 3 ... 7