I'm a new user here.

I want to know if developpers are working about translate LinuxMCE to another languajes, specually to Spanish.

I think LinuxMCE is a great software and I want to made some tests to install it into my house.

There people haven't speaking English. If LinuxMCE is not tranlated to Spanish it is very difucoult to install.

I hope to help to translate LinuxMCE to spanish

Thanks a lot about you work.

the spanish translations is in pogress but its impossiblr for me run correctly linuxmce 7.04, 7.10 b2 and b3, but now with b4 i stand.
Bye

As can receive remote assistance?
Thanks

Tomorrow. 

I'm very happyyyyyy
Que contento estoyyyyyyy

When the final version 7.10?

It's possible integration biometrics system in TCP/IP protocol. Example ACTATEK http://www.actatek.com/actatek_overview.html
Thanks

[CD1 Mandriva]

2) Set up the image of CD1 Mandriva loopback in as root (explain):

(...)

3) Copy the kernel and initrd instructions from the directory alt0 in / boot:

Cd / mnt/iso/i586/isolinux/alt0
Zip all.rdz / boot / install.rdz
Vmlinuz cp / boot / install

4) Create a lilo by adding entry in the / etc / lilo.conf:

Those instructions work for installing Mandriva Linux. Kubuntu/LMCE does not have either an alt0/all.rdz/etc or use lilo (it uses grub instead).

Does anyone have actual instructions for installing 0710b2 from a DVD ISO file, that they've actually tested to work?

Failing that, can I just mount the ISO file as a loopback, delete the PlutoMD-[amd64,i386].tar.bz2 file that I'm not using, unmount the ISO file, and burn it to a single-layer DVD that's no longer too big to fit?

I'm no testing, just i ask in forum this possibility.
I not done mount ISO file as a loopback for delete plutoMD.
Thanks.

SORRY in English

For this installation, you only need your hard drive. In what follows, CD1.iso is the filename of the image of the first installation disk.

1) Write a paper directory accurate and the partition where you downloaded your ISOs (eg / home/mdv2007 and / dev/hda7).

2) Set up the image of CD1 Mandriva loopback in as root (explain):

Mkdir / mnt / iso
Mount o ro, loop CD1.iso / mnt / iso

If you see nothing appear in / mnt / iso it may be necessary to add the parameter t iso9660 to line… mount:

...

Mount t iso9660 o ro, loop CD1.iso / mnt / iso

3) Copy the kernel and initrd instructions from the directory alt0 in / boot:

Cd / mnt/iso/i586/isolinux/alt0
Zip all.rdz / boot / install.rdz
Vmlinuz cp / boot / install

4) Create a lilo by adding entry in the / etc / lilo.conf:

Image = / boot / install
         Install label =
         Root = / dev/ram3
         Initrd = / boot / install.rdz
         Vga = 791

5) Run the command lilo:

Lilo

6) Reboot and choose the menu install:

Reboot

7) You are coming now in the beginning of the installer in text mode. When asked, indicate partition first, and then the location of CD1.iso (no browser ...).

Continue the installation normally.

Installation à partir d'une image ISO sur le disque dur
[edit]

Pour cette installation, vous n'avez besoin que de votre disque dur. Dans ce qui suit, CD1.iso est le nom de fichier de l'image du premier disque d'installation.

1) Notez sur un papier le répertoire exact et la partition où vous avez téléchargé vos images ISO (par exemple : /home/mdv2007 et /dev/hda7).

2) Montez l'image du CD1 de Mandriva en loopback en tant que root (explication) :

mkdir /mnt/iso
mount -o ro,loop CD1.iso /mnt/iso

Si vous ne voyez rien apparaître dans /mnt/iso il peut être nécessaire d'ajouter le paramètre -t iso9660 à la ligne mount … :

...

mount -t iso9660 -o ro,loop CD1.iso /mnt/iso

3) Copiez le kernel et l'initrd d'installation depuis le répertoire alt0 dans /boot :

cd /mnt/iso/i586/isolinux/alt0
cp all.rdz /boot/install.rdz
cp vmlinuz /boot/install

4) Créez une entrée lilo en rajoutant dans le fichier /etc/lilo.conf :

image=/boot/install
        label=install
        root=/dev/ram3
        initrd=/boot/install.rdz
        vga=791

5) Exécutez la commande lilo :

lilo

6) Rebootez et choisissez l'entrée de menu install :

reboot

7) Vous arrivez maintenant dans le début de l'installateur en mode texte. Quand demandé, indiquez d'abord la partition, puis l'emplacement de CD1.iso (il n'y a pas de navigateur...).

Poursuivez l'installation normalement.
KB - Installation à partir d'une image ISO sur le disque dur

It's the possible solution for boot iso image within burn in DL DVD?

It's necesarry in core and thin client the software http://www.2xsoftware.es?

Thanks Zaerc
My MB is Asus P5VD2-VM-SE the chipset is Via P4VM900 and VIA VT8237S
http://www.asus.com/products.aspx?l1=3&l2=11&l3=369&l4=0&model=1787&modelmenu=2
The live DVD linuxmce7.04 and live cd kubuntu 7.04 no HD found but kubuntu 7.1 it's OK.

I have the similar problem with liveCD 7.04 installation: Live CD for installation no HD found, my HD is SATA
With live CD 7.1 no problem.
what's the solution?
Thanks.

It verry necesary, becasuse 7.04 no boot in my hardware configuration (SATA HD) no disk found, but installation ubuntu 7.1 it's good.

Thats a known problem... look here http://forum.linuxmce.org/index.php?topic=2123.15

Impossible to install. My Hardware is MB: Asus P5VD2-VM-SE, intel core duo, 2 GB memory DDRII 667 and HD SATA
with this link no solution, this is the message:
"init: installer-lmce main process (6167) terminated with status 1
Error: No hard drive found".
Thanks

Thats a known problem... look here http://forum.linuxmce.org/index.php?topic=2123.15
   

Impossible to install. My Hardware is MB: Asus P5VD2-VM-SE, intel core duo, 2 GB memory DDRII 667 and HD SATA
with this link no solution, this is the message:
"init: installer-lmce main process (6167) terminated with status 1
Error: No hard drive found".
Thanks

It verry necesary, becasuse 7.04 no boot in my hardware configuration (SATA HD) no disk found, but installation ubuntu 7.1 it's good.

Thank for your responsability. Sorry, i speak spanish.
Agradezco su compromiso, yo esperare a que tenga los nuevos DVD. Se pueden instalar en español?
Thanks.