Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - mickg

Pages: [1]
1
Installation issues / DTS / AC3 problem
« on: September 18, 2008, 08:24:51 am »
I have an issue with DTS and AC3 sound. In the AVWizard, i can hear both sound without any problem, the receiver (Yamaha DSP-Z11) switch between PCM, AC3 and DTS, so i use AC3/DTS pass-trough.
But when i watch DVD Playback with DTS sound, the receiver stay in PCM mode and i can only hear a "tchick-tchick-tchick".

My soundcard is an integrate intel ICH9 on a Asus P5K motherboard.

tks

2
Installation issues / Re: LMCE Crash
« on: May 22, 2008, 10:15:20 pm »
Thank's for your answer,
I have re install the system...
I think, it's a problem with vdr  http://forum.linuxmce.org/index.php?topic=4889.0
I have reinstalled with vdr, and now wait & see...

3
Installation issues / Re: LMCE Crash
« on: May 21, 2008, 06:12:00 pm »
In the admin web, Advanced / Configuration / Unknown Device, I have that :


Wizard | Unknown devices
#    Description    MAC Address    IP Address    Vendor model ID    Serial number    Device    Action
1       00:16:36:4e:a3:ad    192.168.80.251    DT:1837    \\192.168.80.251    1    
2             DT:1790    359e9932-d7ae-4546-9a60-21c75c227a41    1    
3             DT:1790    e29c8e9c-1f25-45e6-af17-c9c1ba2356b0    1    
4       ) Wed May 21 07:4    ) Wed May 21 07    DT:1837    \\) Wed May 21 07:41:28 CEST 2008 Reporting Wed [Wed] to the router Wed May 21 07:41:38 CEST 2008 Processing ) Wed May 21 07:41:28 CEST 2008 Reporting Wed [Wed] to the router May ) Wed May 21 07:41:28 CEST 2008 Reporting Wed [Wed] to the router (mac: ) W

I don't understand nothing...

4
Installation issues / LMCE Crash
« on: May 21, 2008, 02:59:57 pm »
I'm with 7.10 RC1 since few days, and it work nice.
But today my core was busy, i had message "done fileserver ... done fileserver" - "I detected a new P&P device .... fileserver hda1....". So i halt the core, but MD's don't stop (I forced them).
I boot my core and i have this message :
dcerouter_:/etc# dmesg | tail
[  795.392000]  CIFS VFS: cifs_mount failed w/return code = -6
[  796.180000]  CIFS VFS: cifs_mount failed w/return code = -6
[  796.324000]  CIFS VFS: cifs_mount failed w/return code = -6
[  797.052000]  CIFS VFS: cifs_mount failed w/return code = -6
[  797.200000]  CIFS VFS: cifs_mount failed w/return code = -6
[  797.928000]  CIFS VFS: cifs_mount failed w/return code = -6
[  798.072000]  CIFS VFS: cifs_mount failed w/return code = -6
[  798.916000]  CIFS VFS: cifs_mount failed w/return code = -6
[  799.060000]  CIFS VFS: cifs_mount failed w/return code = -6
[  799.784000]  CIFS VFS: cifs_mount failed w/return code = -6
dcerouter_:/etc#

With the launcher, I can't restart the MD hybrid and any other MD's.

Do you have any idea?

Thank's

5
Developers / Re: Home Automation EIB/KNX
« on: May 07, 2008, 08:25:26 am »

6
Installation issues / Re: 32 bit MD
« on: January 19, 2008, 03:00:26 pm »
I have resolved my issues...
I go in advanced setting of media director, click on "view" for device template "Generic PC as MD", and valid "Allowed to modify" in Current Data #233 (+ save page).
In advanded setting i set "LMCE_MD_u0710_i386" in "Model" parameter.
I make a "Rebuilt Image" (maybe it's not necessary), Quick reload and my MD (Fiire Station) start.

But i have another problem. Fiire Station have a Via Unichrome Pro graphic chipset.
I can't start Xserver when "via" is setting in Xorg.conf.
I must set "vesa" to start.
I can't resolved this problem since i use LMCE. I have seen in mantis the same problem and i think that is resolved with 7.10 release.

Last question : When i add a media director, i can choose Fiire Station, but i never can boot with this config. When i boot with Fiire MD, I have red message "Failed Setup_config.sh". Do you have any explain?

Tks
 

7
Installation issues / 32 bit MD
« on: January 19, 2008, 12:42:13 pm »
I have install 710b3 64bit without any problem on core AMD Athlon x2, but i can't install MD 32 bit, the architecture is in 64 bit.

Do you have a solution for me.

Tks in advance

8
Users / Re: What HA Protocol do you (want) to use with LMCE?
« on: January 02, 2008, 07:34:41 pm »
EIB and KNX is the same protocol

9
Users / Re: Home automation
« on: December 21, 2007, 09:48:08 am »
In Europe, there is EIB/KNX bus for home automation. It work fine with LMCE.

10
Developers / Re: Nokia 770 Orbiter
« on: October 25, 2007, 08:21:45 am »
Problem resolved. It was download error for the 2 files...

11
Developers / Re: Nokia 770 Orbiter
« on: October 25, 2007, 08:10:42 am »
Hello,

I have a nokia n800 with OS2007.26-8, and i try to install pluto orbiter. I have installed all the depedencies (with repository) except libmysqlclient12 and libsdl-gfx1.2 : "unable to install ...".
When i try to install the package linuxmceorbiter-0704-03_armel.deb, it's notify application packages missing

Tks

Mickael

12
Users / Re: Web Bookmarks
« on: September 17, 2007, 09:02:21 pm »
Thanks ;-)


13
Users / Web Bookmarks
« on: September 17, 2007, 06:18:30 pm »
Hi,

How can i add new web bookmarks in the computing menu?

Thanks for answer

Mick

14
Installation issues / PlutoMO.sis
« on: August 30, 2007, 08:02:34 am »
I have a nokia n95 Symbian 60v3 and i can't install PlutoMO.sis. The phone says that PlutoMO.sis installation not supported.
There is no problem to install with nokia 6680 symbian 60v2.

Do you have any idea to do that?

tks

Pages: [1]