91
Users / Re: Disabling autoplay when a DVD is inserted...
« on: February 25, 2008, 04:31:22 pm »
thanks kir, perhaps we'll see something happen in the future then
News:
Rule #1 - Be Patient - Rule #2 - Don't ask when, if you don't contribute - Rule #3 - You have coding skills - LinuxMCE's small brother is available: http://www.agocontrol.com
LinuxMCE sponsor
open.home.automation
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
92
Users / Re: How to get the image (jacket) for a dvd
« on: February 25, 2008, 03:14:17 am »
So here is something that I have found to work. It's a pain, but works fairly consistently for non-core storage (not sure why). Go through the manual method to download the cover art. Then delete the image and hit the update button. The image will be repopulated with better quality.
93
Installation issues / Re: Wont boot after DVD install
« on: February 25, 2008, 01:35:29 am »
I can atest to something along the same lines. I've seen on multiple occasions the core refuse to boot if I have a usb mouse or keyboard plugged in.
94
Users / Re: Disabling autoplay when a DVD is inserted...
« on: February 24, 2008, 08:05:03 pm »
Same here 
95
Users / Re: How to get the image (jacket) for a dvd
« on: February 24, 2008, 06:01:11 pm »Using the manual method, the quality and size of the images seem to be significantly worse. Has anyone found this?
Yes, I came here with the same question. How can I get the cover art to look as good as the art being used by the system rips? Can I do any sort of manual resizing. This is even the case when I assign the same URL manaully to a different disk.
96
Installation issues / Mythtv - is there a way to reset to defaults? Is this recommended?
« on: February 24, 2008, 09:48:16 am »
I'm not familiar with the mythtv setting stable (in particular it's location) but I'm having this same problem. Can someone enlighten me as to it's location in the file system?
thanks
thanks
97
Users / Re: Western Digital My Book
« on: February 23, 2008, 11:49:39 pm »
I have used it exclusively via a network connection. It's on the same gigabit switch with the DCE Router.
Like you I usually watch movies off of it (no problem there). It's when I'm writing files to it.
Never without a status. I'm going to try using the USB cable though and see if that makes a difference.
Like you I usually watch movies off of it (no problem there). It's when I'm writing files to it.
Never without a status. I'm going to try using the USB cable though and see if that makes a difference.
98
Users / Re: Western Digital My Book
« on: February 21, 2008, 04:09:01 am »
Yep, that's the same thing I'm talking about. Have you tried any large data transfers with it yet?
99
Users / Re: Western Digital My Book
« on: February 20, 2008, 01:53:55 am »
Alright, so it's been awhile since last put in on this. The WorldBook is still working, but unfortunatly not as well as I would hope. I'm not sure why...yet, but while on LinuxMCE's network it seems to have some sort of hard cut off after which it is completely unresponsive and needs to be reset.
I've watched a couple of movies off of it with mixed results. Again, I'm not sure if it's related, but halfway through some movies it will simply quit out claiming that the disk (in this case the WorldBook) is unreadable. The drive is still accessible though (which is why I think it might be unrelated).
The unresponsive state comes when I've been transferring files to (never from) the drive via the network. It will happen both with one large file (an ISO for example) or several small files (MP3s for example).
I've watched a couple of movies off of it with mixed results. Again, I'm not sure if it's related, but halfway through some movies it will simply quit out claiming that the disk (in this case the WorldBook) is unreadable. The drive is still accessible though (which is why I think it might be unrelated).
The unresponsive state comes when I've been transferring files to (never from) the drive via the network. It will happen both with one large file (an ISO for example) or several small files (MP3s for example).
100
Developers / Re: How's Insteon working?
« on: February 17, 2008, 03:17:43 am »
It's all very clear to me now. lol
101
Developers / Re: Java/ J2ME mobile orbiter
« on: February 16, 2008, 04:26:57 am »
Colin,
perhaps you want to list the blackberry phone model you have and see if anyone (myself included) can do some looking into it.
I don't think "crappy old" was an official model number
Then again... I'm not a guru here
perhaps you want to list the blackberry phone model you have and see if anyone (myself included) can do some looking into it.
I don't think "crappy old" was an official model number
Then again... I'm not a guru here
102
Developers / Re: Java/ J2ME mobile orbiter
« on: February 15, 2008, 07:14:52 pm »
Hari,
you mentioned that you were looking for a "license for the avetana stack"
can you explain to me how their licensing works with them?
this is the page that I came up with http://www.avetana-gmbh.de/avetana-gmbh/produkte/jsr82.eng.xml
according to this page
Does that mean it's limited to 3 addresses. Would everyone using this need to purchase this license for their bt dongles?
thanks
you mentioned that you were looking for a "license for the avetana stack"
can you explain to me how their licensing works with them?
this is the page that I came up with http://www.avetana-gmbh.de/avetana-gmbh/produkte/jsr82.eng.xml
according to this page
Quote
To extend your license beyond the duration of 14 days, you can purchase a license valid for a maximum of 3 addresses for EUR 25
Does that mean it's limited to 3 addresses. Would everyone using this need to purchase this license for their bt dongles?
thanks
103
Developers / Re: How's Insteon working?
« on: February 15, 2008, 07:02:55 pm »
Not at all, I'm very impressed with your documentation skill, especially when considering it's a second language (I thought I read that somewhere)
104
Developers / Re: How's Insteon working?
« on: February 14, 2008, 08:21:14 pm »
Hey Dan,
first off, thanks for offering this code. I'm just getting into LinuxMCE right now and it's great to see that there is already some Insteon support.
In any case, pertaining to the tutorial. I had a little trouble reading this line:
Correct me if I'm wrong, but are you trying to say
Just a small point, but I thought it might be helpful.
first off, thanks for offering this code. I'm just getting into LinuxMCE right now and it's great to see that there is already some Insteon support.
In any case, pertaining to the tutorial. I had a little trouble reading this line:
Quote
This driver supports ONLY the Powerlinc Modem model (PLM)# 2412S. If you have a 2414, this code will NOT work. You have a Powerlinc CONTROLLER. or PLC
Correct me if I'm wrong, but are you trying to say
Quote
This driver supports ONLY the Powerlinc Modem model (PLM)#2412S. The code will NOT work for a model #2414 also known as a Powerlinc CONTROLLER (PLC)
Just a small point, but I thought it might be helpful.
105
Users / Re: Western Digital My Book
« on: September 30, 2007, 04:32:46 pm »
I have one of these, but I have not been able to get it it work with the system yet.
First off, I'm still using Pluto. I'm going to be making the switch soon, but one of my key objectives it to have this NAS working for me. Hopefully that does not put up a large wall with any help anyone can supply.
My issue is in the fact that it's simply not being picked up by the core. Usually when I have something plugged in on the network it shows up on my MD and notifies me that I have a new storage device. Not the case here. I get an IP, but that's it. How can I force the Core to recognize this?
The NAS itself is pretty decent. I've played around with the settings a little bit to give it some more memory toward network bandwidth and increased that transfer rate by about (guessing) 25%.
There is also a short tutorial on how to give the book ssh access which I found helpful
http://martin.hinner.info/mybook/sshaccess.php
First off, I'm still using Pluto. I'm going to be making the switch soon, but one of my key objectives it to have this NAS working for me. Hopefully that does not put up a large wall with any help anyone can supply.
My issue is in the fact that it's simply not being picked up by the core. Usually when I have something plugged in on the network it shows up on my MD and notifies me that I have a new storage device. Not the case here. I get an IP, but that's it. How can I force the Core to recognize this?
The NAS itself is pretty decent. I've played around with the settings a little bit to give it some more memory toward network bandwidth and increased that transfer rate by about (guessing) 25%.
There is also a short tutorial on how to give the book ssh access which I found helpful
http://martin.hinner.info/mybook/sshaccess.php