Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - bugui

Pages: 1 [2] 3 4 5
Hello Guys,
I would like to continue to have the possibility to use Mythtv or VDR, because there is a lot of countries (ej.Argentina where I came from) that still uses analog tv signal, and PAL will keep with us for at least the next 9 years.

Also, Brasil, Chile, Perú, Argentina, Uruguay, Venezuela, are moving to ISDB-T as digital transmition. I have LMCE 1004 runing with a USB isdb-t tuner dongle and is working with mythtv, but not works on VDR.
Mythtv 0.25 supports HE-AAC LATAM audio (that is used in Latin America), and I tested and it works perfect, I read that VDR couldn't decode this codec, I couldn't make it work with isdb-t.

Thanks all


Developers / Re: [Solved] Dealextreme (cheap) IP Camera help
« on: May 21, 2012, 09:19:52 am »
I get it works, you should use generic motion Ip camera template.
I leave my /etc/motion/thread1.conf should have this config.

dcerouter_1027137:/home/cameras/234# cat /etc/motion/thread1.conf
netcam_userpass admin:1234

noise_level 32

text_left AltilloCam\nAltillo

target_dir /home/cameras/234

# webcam server settings
webcam_port 8001
webcam_localhost off
webcam_motion  on

# sending pluto tripped on/off events on motion start/end
on_event_start /usr/pluto/bin/MessageSend 234 -1001 2 9 25 1
on_event_end /usr/pluto/bin/MessageSend 234 -1001 2 9 25 0

hi all,
I create a new template for AVR-1611 vía IR.
It's working fine.
Could you tell to me how can I share this with the community ?


Users / Re: hope for blu-ray afterall..
« on: January 17, 2012, 07:38:28 pm »
But I don't understand, what is the "legal difference" or what could be "out of the law", if we "play dvds" using lmce MDs or Core (supported by LMCE), or getting a way to "play blueray disks" w/ lmce (that is not supported).


Users / Re: xine-lib and video playback issues?
« on: January 11, 2012, 10:57:22 am »
Hey guys,
I upgraded xine-ui and I can see the .mkv movies with subtitles !!!!

dcerouter_1024067:/home/hernan# apt-cache policy xine-ui
  Installed: 0.99.7~hg20111005-0yavdr3~lucid
  Candidate: 0.99.7~hg20111005-0yavdr3~lucid
  Version table:
 *** 0.99.7~hg20111005-0yavdr3~lucid 0
        500 lucid/beta2 Packages
        100 /var/lib/dpkg/status
     0.99.5+cvs20070914-2.1 0
        500 lucid/universe Packages
        500 lucid/universe Packages


Installation issues / Re: MythTV_Player not installing in beta2
« on: January 10, 2012, 10:56:02 am »
It happens too, on 10.04 10/1/2012 update.


Installation issues / Re: Media Director with video capture
« on: January 07, 2012, 09:45:17 am »
Hi Tony,
I'm very interested in the way that mythtv could record multiple channels of a paid subscription (DirecTV in my case), and I see that you know a lot on this.

Could you help to me to understand and drop some links to read?

Thanks in advance

Users / Re: How to setuo sccp.conf and use SCCP under Asterisk
« on: December 13, 2011, 06:22:07 am »
Hi daballiemo,
Do you have a camera on your system?


Users / Re: climate control
« on: December 11, 2011, 09:51:56 am »
Ups, It works Posde!!!  ;)

Users / Re: New PLCBUS driver
« on: November 19, 2011, 07:36:30 am »
Yes, I could upload pictures and diagrams also, but I need to finish a proyect now, I will do in a couple of weeks.

I was looking for KNX devices here in argentina, I only found ABB, I tolk with them and they told to me that your own consumer business unit is not developed yet, then they don't know the home automation product line of your own company - ;-p
But I would like to know if all KNX branches supports transport over powerline (is that transport an standard of KNX?), could you give to me the name of a verdor that supports KNX w/powerline, no matter were it comes because, I will need to import this product to argentina because KNX is very new here.

Thanks in advance,

Hello Hari,
I'm using your PLCBUS Driver with 4 dual micromodules.
I have some issues, when I reload the dcerouter but, at the time I got good results, that was the only thing that I can see on it.
I know that KNX it is more reliable, but the difference with the price between PLC ans KNX so high that I thinking that maybe, PLC can be good solution on a hybrid installation (KNX inside the house, PLCBUS for outside lamps).
I would like to ask to you if we can combine this two technologies in order to offer a good price-reliability solution.

Thanks in advance

Users / Re: New PLCBUS driver
« on: November 18, 2011, 06:10:38 am »
Check if you install the modules with correct polarity (Fase & Neutral) because if they are inverted then it doesn't work.


Yes, I think that DSC is the way until now.
It still has some issues specially with PNP (because we need to work with). I installed a new 10.04 in order to buid a new device template and run more tests.
It's working fine, the issue that I got, arrise (for some reason) when you need to run "a quick reload router" (DSCRouter loose communication w/ the module) It can't bring back if you just resetting the module.
But If you reboot core and it cames online again.

I think that is PNP again, and it's kind of failure is identical as you can see on 0810 with PLCBUS, because of that I think that is a problem w/ generic serial devices and PNP.
I will need a little bit of help in order to finish the integration. I mean, I'm not a programmer.


Marketplace / Re: Dianemo 10.10 Systems from CHT - Now Shipping World Wide!
« on: November 06, 2011, 08:33:55 am »
Hi Andrew,
Has dianemo spanish language support ? for UI, orbiters, also asterisk stuff?


Pages: 1 [2] 3 4 5