Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages -

Pages: 1 ... 12 13 [14]
Feature requests & roadmap / Re: Support for sasc-ng
« on: June 13, 2007, 12:21:53 pm »
should be, if compatible with the version, and with the os version!!!

Users / Re: camera and linuxmce for access control and security!
« on: June 11, 2007, 12:01:22 pm »
After what, we need to add a switch in the call view, if the caller is intercom.  The view would be from the door ip camera !!!
I think the addition between SIP IP phone + camera.. should be great. Ohhh, I forgot, the aim is not to have to put more wire. I just want to use cpl, wifi, and power supply !!!

Thanks for feedback or advice.

Users / Re: camera and linuxmce for access control and security!
« on: June 08, 2007, 04:55:05 pm »
thanks for your reply,

Your idea is great, I didn't though about it. I'd like to hear your project in detail, and why not a process !!!
Another solution could be to put an IP phone in front !!!

And/or to put a standard RF intercom for audio only (and wifi camera for video) and to make an analog acquisition like analog phone on asterix, is it what you was talking about ???
these one for example

Users / Re: camera and linuxmce for access control and security!
« on: June 07, 2007, 10:32:09 am »
up !!

Any idea !! Is there someone who make it possible to speak with the visitor, like a video intercom but with tha possibility of doing it in linuxmce on each tv set !!!

Thanks per avance!

Users / Re: camera and linuxmce for access control and security!
« on: May 23, 2007, 08:46:20 am »
Hy, and thans helping.
I don't really mather with quality !!!!

I think you are wright with the java applet, I guess it control it with java. The trend camera (Trendnet TV-IP 100) is compatible with java and other (here is the code I don't know if I will use it or another one (is xcam -  compatible - i think it's working with x10 but is it hard to make it control by linuxmce).

Myu big problem is about the intercom. To replace it, I was thinking about:
- x10 technologie (switch MS13 + rf receptor + cm11 interface). People come, press button, then x10 info is send to the linuxmce computer. A screen open with the trendnet tv-ip201W camera which have a microphone. So it 's possible to see the visitor and to listen. Then if ok, I send a x10 command to the door to open (electrical open). However, how to interract with the visitor ??? How to speak with him, is it possible with linuxmce, or to hard !!!! I was thinking about some message already recorded close to the entrance in a leatle player, and button on screen to send playback order to the intercom (for exemple yes, no, you can enter...).

Any help will be appreciate.

Users / camera and linuxmce for access control and security!
« on: May 22, 2007, 04:46:38 pm »
Hy every body,

I plan to install linuxmce for security purpose and need some help from the masters of linuxmce.

1/ I need to install camera
a/ outside of the house (with motion detection) for security
b/ one for the intercom
c/ and inside (with the possibility of moving the camera)


1-a/ and b/ I found xcam camera ( but don't know how linuxmce deal with.
I though also about an ip camera (wifi) but don't know exactly which one are recognise (cheapest one). On pluto website there is compatibility list (Panasonic IP Cameras,Dlink IP Camera,Axis IP Camera) but it is very expensive camera !! Are these one compatible: trendnet camera ip wifi tv ip100w, DCS-950G... which are very cheap !!

2/ I'd like to make a control access for peaople who want to enter in my house based on a camera, and an switch. When people press the button, the camera of the celling appears then I can speak with the person and press on the touch screen to open if I agree. My question is how to make it possible to b e hear by the visitor?? Do I need to wire HP cables... My aim is to use the electriq line only and not using any more cable, is it possible???

Thank's for your help!

Installation issues / Re: TV Card
« on: May 22, 2007, 03:40:18 pm »
look's like all bttv compatible cards !!!
See mythtv spec for more details !!!!

thanks for your reply, I'll look on it !!! and'll be back with feedback !!

Hello, Is there any feedback on this hardware:

- pinnacle pctv dual tunner sat pro dvb-s, are the bttv driver working on it ??? whith wich version?? included in with distib and/or kernnel

Is there someone that was able to make it work through the network in core and MD??

Is the dvb-s or T working usually, also with other video card, or have we to wait until next release ???

Thank's for any help.

Installation issues / Re: libjack0.100.0-0 is not available
« on: May 15, 2007, 09:43:40 am »
I tried two solutions:

1/ So I try to install the libjack package until I solve dependencie
libasound2 (>> 1.0.12)
libc6 (>= 2.5-0ubuntu1)
libfreebob0 (>= 1.0.0)

but failed with libfreebob0. libc6 make crash some dependencies with openoffice... then unable to recover it !!! So give up to make it work.

2/ unplug tunner card and capture card, install, then mce installer crash again will look why, but I ask my self if it's not because I'm not connected to internet, maybe live update make it better working!!! Is there a storage area where the package are up-to-date and where I can download  them, in order to make it work offline ???

Installation issues / Re: libjack0.100.0-0 is not available
« on: May 10, 2007, 11:31:00 am »
I've got the same problem and I have two video cards installed:
- pctv dual sat pinnacle
- all in one radeon ati

I readed somewhere that you need to unplug the tv card before installing !!!!

Is there any other solution ????

Pages: 1 ... 12 13 [14]