Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - caiman

Pages: 1 [2] 3 4 ... 8
There is a wiki page for the remote: but it doesn't have more info than on the user guide. Of course, when I figure out how to do it, if possible at all, I will add it to the wiki.

I have already added more info on how to use the "set association" command on the web interface:

I have verified that the  "set association" command of the web interface is working fine. Thank you SIS mode, and thanks Hari!

However I would still be interested in finding out how to do it with the tricklestar remote if at all supported.

Hi team,

all in the title... I just did a SIS mode install with a seluxit USB controller and a tricklestar remote.
I can include devices, and use the remote to create associations between devices for group 1.

But how can I create associations between devices for group 2 or 3?

I still have a ZTH if needed, but it would be nice to do it with the remote alone?

I have checked the tricklestar website but links to the docs are broken, and the paper doc I have received does not cover groups other than 1...


... and it is now fixed. Thank you!

I just found that the copy of zaptel-modules on
Code: [Select] is incorrect, it is just a copy of package linux-image-diskless !

The version on release looks better though:
Code: [Select][code]
Once this is fixed in the repository, I expect the installation of pluto-asterisk will go fine[/code]

is the pluto-voicemail-monitor needed? i will integrate with a spa-3102 and pap2t-na....

Probably yes. But the dependency is on zaptel-modules, which is probably not needed unless you are using a USB or PCI  PSTN adapter (unlikely).

I am still struggling to install pluto-asterisk without this zaptel-modules...

it looks like there is a chain of dependencies of pluto-asterisk to zaptel-modules.
zaptel-modules is on the repository, but not in the Packages files.

However, a manual install gives me:
Code: [Select]
dcerouter_1007047:~# wget
--2010-01-31 20:34:18--
Connecting to||:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 34150318 (33M) [application/x-debian-package]
Saving to: `zaptel-modules-2.6.27-16-generic_1.4.11~dfsg-2+2.6.27-16.44_i386.deb'

100%[===========================================================================>] 34,150,318   476K/s   in 72s     

2010-01-31 20:35:30 (463 KB/s) - `zaptel-modules-2.6.27-16-generic_1.4.11~dfsg-2+2.6.27-16.44_i386.deb' saved [34150318/34150318]

dcerouter_1007047:~# dpkg -i zaptel-modules-2.6.27-16-generic_1.4.11~dfsg-2+2.6.27-16.44_i386.deb
Selecting previously deselected package linux-image-diskless.
(Reading database ... 153366 files and directories currently installed.)
Unpacking linux-image-diskless (from zaptel-modules-2.6.27-16-generic_1.4.11~dfsg-2+2.6.27-16.44_i386.deb) ...
dpkg: error processing zaptel-modules-2.6.27-16-generic_1.4.11~dfsg-2+2.6.27-16.44_i386.deb (--install):
 trying to overwrite `/lib/modules/2.6.27-16-generic/initrd/vesafb.ko', which is also in package linux-image-2.6.27-16-generic
dpkg-deb: subprocess paste killed by signal (Broken pipe)
Errors were encountered while processing:

after changing my mirror from to, the apt-get update process works fine and the package pluto-avwizard can be installed without problems

I have the same issue: broken dependency for pluto-orbiter and pluto-avwizard leading to a grey screen with mouse cursor.

doing apt-get update, I have some failures:

Code: [Select]
Hit intrepid-updates/main Sources                                                  
Err universe/main Packages                                                            
  404 Not Found [IP: 80]
Ign stable/main Packages                                                          
Hit intrepid-security/restricted Sources                                              
Hit intrepid-security/universe Sources                          
Hit intrepid-security/multiverse Sources                        
Hit intrepid/beta2 Packages                                        
Err universe/non-free Packages                                  
  404 Not Found [IP: 80]
Hit intrepid-updates/restricted Sources                      
Hit intrepid-updates/universe Sources                        
Hit intrepid-updates/multiverse Sources                      
Err universe/contrib Packages                                    
  404 Not Found [IP: 80]
Hit replacements_ubuntu/main Packages        
Hit 20dev_ubuntu/main Packages
Hit stable/main Packages
Fetched 1B in 1s (1B/s)  
W: Failed to fetch  404 Not Found [IP: 80]

W: Failed to fetch  404 Not Found [IP: 80]

W: Failed to fetch  404 Not Found [IP: 80]

Browsing there is no universe folder but a dists/intrepid/universe.
I guess I have to correct the corresponding lines in /etc/apt/sources.conf, but how...

* Update:
First I modified
Code: [Select]
deb universe  main non-free contrib to become
Code: [Select]
deb intrepid universe  main non-free contribbut then I got
Code: [Select]
W: Failed to fetch  Unable to find expected entry  non-free/binary-i386/Packages in Meta-index file (malformed Release file?)

so in the end I commented the line out completely, as the previous line
Code: [Select]
deb intrepid  main universe multiverse covers main universe multiverse, but non-free and contrib don't seem to be available on that server

Now apt-get update works fine, but pluto-avwizard still won't install:
Code: [Select]
dcerouter_1007047:/etc/apt# apt-get install pluto-avwizard
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.

Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
  pluto-avwizard: Depends: pluto-xine-player but it is not installable
E: Broken packages

Users / Re: iPhone/iPod Touch Orbiter?
« on: January 28, 2010, 10:41:46 pm »
Once/if I get the iphone version running the way I want, I will probably make an ipad variant, replacing the navigation controllers with a split view controller.

But the ipad is a different beast altogether, and IMHO the perfect platform to run a full-blown orbiter. I won't be able to code that though, and I hope some brave souls will give it a go.

The web interface should work well too, I'll try in the simulator to get a first feeling. But nothing like a native app on the wonderful apple devices ;)

Users / Re: iPhone/iPod Touch Orbiter?
« on: January 22, 2010, 08:46:35 am »
Any updates, Caiman?

Yes, this is still going on with the architecture, feature list defined and the main individual features tested separately. Now I need to put it all together :)

Users / Re: iPhone/iPod Touch Orbiter?
« on: November 15, 2009, 05:43:28 pm »

The reason I kicked off this thread was to measure peoples interest in the iPhone as an Orbiter and also to start a discussion about what an iPhone Orbiter should be... and hopefully to find a group of Forum members who could run with it and develop it.

I have bought the SDK for this, and started learning cocoa. Already got a (very stupid) app which allows me to execute scenarios (via the web gui). Yes, I know it is not the right way, but one needs to start learning somewhere. And I find it very useful already. I am willing to contribute some time (I don't have a lot) this winter to learn more and build a nicer solution.

  • I agree with Thom that a full orbiter would be WAY too complicated for newbies like me to implement. LMCE would run on quantum computers before I get close.
  • I also would love a fast, native iphone app, even if it has less functionality than a full orbiter. (e.g. text only)
  • Using mobile orbiter could be a great first step though, and I am ok with that, if we could run it over TCP instead of RFCOMM

Does anyone have the skills, time and desire to make the server-side of mobile orbiter work with bonjour/TCP instead of RFCOMM ?

Users / Re: New Z-Wave driver
« on: June 03, 2009, 11:01:48 pm »
Hi Hari and team,

has anyone tried or made the Schlage z-wave doorlock work with LMCE ?

It is sold with its own zwave controller, but of course I would love to integrate it with the existing LMCE network and be able to get notifications in LMCE when someone unlocks the door...

Developers / Re: GSD/Ruby Developers Conferences
« on: December 24, 2008, 05:05:21 pm »
Hi Tschak,

I have (had) that already working, using SQL queries to get the info, MessageSend to send the commands, and a ready-made library for jabber connectivity (well, that is until I made a stupid "rm" command on it recently and of course, no backup :(

Yet it was nice to switch lights on/off and query status from a mobile IM client on my phone :)

But I wanted to make it "nicer and cleaner" and re-implement fully using DCE. Maybe it's not worth the effort per se, but it's mostly for learning.

Pages: 1 [2] 3 4 ... 8