106
Users / Re: Don't ring any phones during sleeping mode?
« on: November 10, 2010, 06:49:09 pm »
Check the call routing options under telecomm.
HTH
Tim
HTH
Tim
Rule #1 - Be Patient - Rule #2 - Don't ask when, if you don't contribute - Rule #3 - You have coding skills - LinuxMCE's small brother is available: http://www.agocontrol.com
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2049 is complete now.
You should be able to pick up the changes I made by choosing Advanced>sqlCVS>Update and choosing all the dce and ir tables. However, for this to work your version of LinuxMCE needs to be newer than Update 2010-09-16 23289. A change was made to the Generic Serial Device plugin in that version which is required to use it with the Roku box.
--Eric
hallo all.
I'm tring to install my revo 3610 as a md in my master bedroom.
My core is a dell 4600 with intel 4 2.4Mhz single core processor, 1.5g ram, duel nic (1 onboard and a pci 3com), and a gforce 6200 agp
I used the dvd install of linuxmce 810, I followed the directions to the t from the linuxmce wiki. I have eth0 as external and eth1 as internal networks
When I pxe boot the revo, it starts going through all the motions and stops at could not open /usr/tmp-eth0 or something like that
I removed the internal wifi card out of the revo...no change
I have been researching and found people saying to edit the kernal module at usr/pluto/diskless with the proper driver. I dont have that folder
I have also read that i can blacklist the nic
or update the diskless image with the driver for the nic
I need direction on what I need to do...PLEASE I dont know what to do next
Greetings all. I've been playing with 0810 for a few days now and am very impressed, but I can't seem to get a MD working other than the hybrid. I tried an old tablet Windows machine with 500MB RAM and got as far as AV setup but then it failed to get much further. I tried a Toshiba Portege (about 12-18 month vintage) and it wouldn't even get that far, it got it's IP address and said it was running DisklessSetup.sh but then hung. I have a Media Center type PC with a fujitsu bios but even though I set it to boot from LAN it seems to ignore it (if I disable everything but the LAN it refuses to try to boot anything). So if it is possible to get an image that will boot from USB or something else I'd like to try, can someone point me at some instructions?
I have read lots of posts about why pxe booting is so much more desireable but the hardware I have to hand seems to disagree!
Thanks all,
Blaine
Did anyone use this product before
http://www.aeon-labs.com/site/products/view/4/