Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - tkmedia

Pages: 1 [2] 3 4 5
16
Users / Attention Web pad users.
« on: March 26, 2009, 09:49:46 pm »
A few including myself have been frustrated by triggering some thing when trying to wake the web dt.


It can be easily fixed by going to the advanced page of your oribiter and check Ignore First Event .
and reload router



HTH


Tim    

17
Marketplace / 2 for 1 Scratch and dent webpad sale
« on: March 18, 2009, 09:35:10 pm »
I have a few sets of web pads that have more scratches than normal ( still not bad ) but nothing I feel right getting full price for, so I am offering two for the price of one. You just pay the shipping for both.

BTW Just Kidding about the dents. :D




Tim

18
I have found a supplier for Webdt366 cradles In Us these are new units.

They are   $110  +15 for US shipping


PM me
or See me in #linuxmce


Tim


If cheaper in Eu

as Hari says


RSC Technology
email: rs@rsc.se

> - Dockingstation:    84 €
>  The prices does not include VAT and shipping cost.

19
Feature requests & roadmap / Feature Request "Video Clips"
« on: January 26, 2009, 05:31:20 pm »
After  playing with bookmarks last night I thought wouldn't it be nice to add an end point.  It already has a start point.

This would in essence make a video clip.

Great to turn concerts into music videos and make your home movies into "worlds funniest videos"


We could add those to play-lists combined with music entries would  be great imho


Thoughts?



Tim

20
Compatible Products & Services / Linuxmce Starter Kits Available
« on: January 25, 2009, 05:24:25 am »
Fully Licensed Pre-Installed Linuxmce starter kits available.

See tkmedia for details

PM me or catch me in #linuxmce


Details and pricing will be posted soon.

Thanks

Tim

21
Users / No sound on Ac888
« on: January 12, 2009, 04:35:45 pm »
I cant get sound working on my new mobo MSI 7411 it uses the ac888  for sound

I have tried a bunch of distros as well all seem to have the same problem.

In alsamixer only the IEC698 is displayed

I tried adding 5stack-digout parameters. But no luck

In reading it looks like it maybe kernel level.

no luck under 0710 or 0810


thoughts anyone?


22
2009 Pricing.

US Pricing
Custom LinuxMce 0710 Orbiter $350.00 preconfigured/unconfigured
WEB DT 366 8.4” Display w/Resistive touch 800x600 SVGA AMD Geode GX. 500mb
Int. PCMCIA 802.11 Cisco wireless adapter;
USB, audio out, audio in and built in mic.

Custom 2GB usb 2.0 flash drive $30.00
Bootable Linuxmce Webpad orbiter installation USB stick.
Webpad Easel   $25

Europe pricing
Custom LinuxMce 0710 Orbiter Eur 370.00 preconfigured/unconfigured
WEB DT 366 8.4” Display w/Resistive touch 800x600 SVGA AMD Geode GX. 500mb
Int. PCMCIA 802.11 Cisco wireless adapter;
USB, audio out, audio in and built in mic.

Custom 2GB usb 2.0 flash drive Eur 20.00
Bootable Linuxmce Webpad orbiter installation USB stick.
Webpad Easel   Eur 15

European pricing includes shipping to most areas.

Bulk orders of 5 or more includes shipping and VAT

** Currently no WPA support..... that is being looked into

*** All web pads are used and sold as is. All have some level of scratches on screens and battery life varies.

Originally sold for $1500-$1800


**** Ask about multi-unit pricing



Send Pm or catch me in #linuxmce

Thanks

tkmedia

23
Users / Thank You
« on: January 02, 2009, 05:42:20 am »
I just want to say Thank You.......


Firstly to the DEV team in getting control of this project and getting close to its first community release. THANK YOU.

Special thanks for the Efforts of the Linux Tag 2008 team...  You guys are awesome.


Thank you  all who have purchased web pads from me and to those that will.

* A portion of web-pad proceeds goes directly to help one or more of the lmce developers.



And Thank You community for all your efforts and suggestions.


Tim




24
1. Web Dt has "WAF"
2. Displays Photos directly.
3. Quick touch access to menus.
4. Great feed back with DVD menus.
5. Excellent form factor.

let me know yours


Tim

25
OK  here is the deal:

First batch of LinuxMce 0710 Orbiter WEB DT336's  are SOLD!

I have more on the way.  but going quick

Special Holiday Pricing: $250.00 Ends 12/31/08  Reg $350


Custom LinuxMce 0710 Orbiter $250.00 preconfigured/unconfigured

WEB DT 366 8.4” Display w/Resistive touch 800x600 SVGA AMD Geode GX. 500mb
Int. PCMCIA 802.11 Cisco wireless adapter;
USB, audio out, audio in and built in mic.


Custom 2GB usb 2.0 flash drive $25.00
Bootable Linuxmce Webpad orbiter installation USB stick.


Webpad Easel   $20

** Currently no WPA support..... that is being looked into

*** All web pads are used and sold as is. All have some level of scratches on screens and battery life varies.

Originally sold for $1500-$1800

Ensure your delivery by Christmas .....

Send Pm or catch me in #linuxmce

tkmedia

 Or

For faster service.

Copy the following  and change your qty's accordingly

1. Custom LinuxMce 0710 Orbiter $250.00 preconfigured
1. Custom 2gb usb 2.0 flash drive (Bootable linuxmce webpad orbiter installation usb stick.) $25.00
1. Webpad Easel   $20

US shipping $20 per unit



and Email me at tkearns41@gmail.com


26
Users / Caller ID problem
« on: October 09, 2008, 05:54:35 pm »
I am using voicepulse voip and everything is fine  with the exception of out going caller id

I used teliax for template .
I thought iax trunk was causing the caller id problem.
I created a sip trunk and i still have the same problem.
If i remove the caller id contents <200> etc at the extension caller id goes through fine.
Unfortunately the extension caller id gets repopulated upon reboot.


thoughts anyone

Thanks


Tim

27
Users / Sony Changer no longer identifies discs.
« on: September 03, 2008, 07:40:31 pm »
Strange after installing  0710 -RC2 the sony changer will no longer identify discs.
Even stranger after reinstall of 7010 rc1 on test pc it no longer works as well.
The jobs to identify are in pending tasks, but never get serviced.


Thoughts anyone


Tim

28
Users / Sub $ 100 audio solution. MediaMVP
« on: June 23, 2008, 07:00:24 pm »
I have been working to add support for the Hauppauge MediaMVP After some mods to dongle.bin now I have it working as squeezbox player and i am able to boot and control it from LMCE, as Squeezebox Player. I am trying to create a device template to make it PNP in LMCE, I used the squeezebox template as a basis for my MVPTemplate. The problem is when using the MVP template, I get an error stating you dont have a device capable of playing or something close.


Thoughts anyone?

29
Users / Trouble shooting the Sony xbl3 rip script for Cd's
« on: February 21, 2008, 06:05:48 pm »
Code: [Select]

10 02/20/08 13:46:20.125 Launching riping job2 with name "Rip" for disk with type "0" parms 114 0 3 /mnt/device/31/audio/Pink Floyd/A Momentary Lapse of Reason /dev/scd1 0 1 flac A <0x42003950>


Disk_Drive_Functions::FixupRippingInfo Transformed A into 1,Signs of Life  Instrumental|2,Learning to Fly|3,The Dogs of War|4,One Slip|5,On the Turning Away|6,Yet Another Movie Round and Around|7,A New Machine, Pt. 1|8,Terminal Frost|9,A New Machine, Pt. 2|10,Sorrow| <0x42003950>
10 02/20/08 13:46:20.052 Disk_Drive_Functions::FixupRippingInfo done PK_MediaType 2 sFilename /mnt/device/31/audio/Pink Floyd/A Momentary Lapse of Reason (0) sTracks 1,Signs of Life  Instrumental|2,Learning to Fly|3,The Dogs of War|4,One Slip|5,On the Turning Away|6,Yet Another Movie Round and Around|7,A New Machine, Pt. 1|8,Terminal Frost|9,A New Machine, Pt. 2|10,Sorrow| iEK_Disc 3 sDirectory /mnt/device/31/audio/ <0x42003950>
10 02/20/08 13:46:20.052 Job::RefreshOrbiter 0x69bcb0/20 <0x42003950>

02/20/08 13:46:22.511 RipTask::UpdateProgress id 0 m_eTaskStatus_get 1 status e message [b]ERROR: for encoding a raw file you must specify a value for --endian, --sign, --channels, --bps, and --sample-rat[/b]e file /mnt/device/31/audio/Pink Floyd/A Momentary Lapse of Reason () <0x41802950>


from working std cd drive

app serverlog
'rip_job_1_task_0': /usr/pluto/bin/ripDiskWrapper.sh 81   1   0   /mnt/device/31/audio/Cream/The Cream of Clapton   /dev/scd0   0   1   flac   1,I Feel Free. PID: 23648 <0x41802950>




Code: [Select]
From Sony Changer

spawning 'rip_job_0_task_3': /usr/pluto/bin/ripDiskWrapper.sh 114 0 3 /mnt/device/31/audio/Pink Floyd/A Momentary Lapse of Reason /dev/scd1 0 1 flac A. PID: 19069 <0x41802950>



It appears the parameters may be in different sequences

30
Users / Just got my New Sharp Aqous 42"
« on: February 19, 2008, 11:06:03 pm »
Going to hook it up with Linuxmce tonight


It should be pnp I will be using a Usb - serial cable .


Thoughts

Tips

Pages: 1 [2] 3 4 5