Messages

1

Users / Problem with VDR on Hybrid and MD

« on: May 05, 2010, 08:38:00 pm »

I have LMCE 8.10 Beta installed on Hybrid with one MD. On Hybrid I have installed DVB card SkyStar 2 (worked fine out of box, thanks Mandingo).
When I’m watching TV on MD in the same time on Hybrid I can watch only channels from the same transponder. I know about that.
But, the problem is when TV is off on MD it still locks DVB card and I’m not able to watch all channels on Hybrid, only from one transponder.
When I’m stopping VDR on MD (/etc/init.d/vdr stop) DVB card is unlocked and now I can watch all channels from all transponders on Hybrid without any problems.
But it’s very unusable to stop manually VDR on MD when I want to watch TV on Hybrid and start it again when I want to watch TV on MD.
Is it possible to remove starting VDR on MD by default when system starts and start VDR only when I press button “TV” on MD’s screen orbiter?
(And also stop VDR when I press button “Off” to stop watching TV)
Maybe it possible to make some correction of code for that buttons? (For example, add strings /etc/init.d/vdr start and stop where necessary)
Or maybe it’s possible to change some scenarios from web admin?

Thanks for any help

2

Users / Re: DVB Cards info needed for Templates

« on: January 12, 2010, 12:18:08 am »

sudo lspci -vn

Code: [Select]

00:00.0 0500: 10de:03ea (rev a1)
        Subsystem: 1458:5001
        Flags: bus master, 66MHz, fast devsel, latency 0
        Capabilities: [44] HyperTransport: Slave or Primary Interface
        Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-

00:01.0 0601: 10de:03e0 (rev a2)
        Subsystem: 1458:0c11
        Flags: bus master, 66MHz, fast devsel, latency 0

00:01.1 0c05: 10de:03eb (rev a2)
        Subsystem: 1458:0c11
        Flags: 66MHz, fast devsel, IRQ 5
        I/O ports at c400 [size=64]
        I/O ports at 1c00 [size=64]
        I/O ports at 1c40 [size=64]
        Capabilities: [44] Power Management version 2
        Kernel driver in use: nForce2_smbus
        Kernel modules: i2c-nforce2

00:01.2 0500: 10de:03f5 (rev a2)
        Subsystem: 1458:0c11
        Flags: 66MHz, fast devsel

00:02.0 0c03: 10de:03f1 (rev a3) (prog-if 10)
        Subsystem: 1458:5004
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
        Memory at fd006000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2
        Kernel driver in use: ohci_hcd
        Kernel modules: ohci-hcd

00:02.1 0c03: 10de:03f2 (rev a3) (prog-if 20)
        Subsystem: 1458:5004
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
        Memory at fd007000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [44] Debug port: BAR=1 offset=0098
        Capabilities: [80] Power Management version 2
        Kernel driver in use: ehci_hcd
        Kernel modules: ehci-hcd

00:04.0 0604: 10de:03f3 (rev a1) (prog-if 01)
        Flags: bus master, 66MHz, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 0000a000-0000afff
        Memory behind bridge: fb000000-fcffffff
        Prefetchable memory behind bridge: 88000000-880fffff
        Capabilities: [b8] Subsystem: 1458:026f
        Capabilities: [8c] HyperTransport: MSI Mapping Enable+ Fixed-

00:05.0 0403: 10de:03f0 (rev a2)
        Subsystem: 1458:a002
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
        Memory at fd000000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [44] Power Management version 2
        Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable-
        Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
        Kernel driver in use: HDA Intel
        Kernel modules: snd-hda-intel

00:06.0 0101: 10de:03ec (rev a2) (prog-if 8a [Master SecP PriP])
        Subsystem: f458:5002
        Flags: bus master, 66MHz, fast devsel, latency 0
        [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
        [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
        [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
        [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
        I/O ports at f000 [size=16]
        Capabilities: [44] Power Management version 2
        Kernel driver in use: pata_amd
        Kernel modules: pata_amd

00:07.0 0680: 10de:03ef (rev a2)
        Subsystem: 1458:e000
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 222
        Memory at fd004000 (32-bit, non-prefetchable) [size=4K]
        I/O ports at c800 [size=8]
        Capabilities: [44] Power Management version 2
        Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/3 Enable+
        Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
        Kernel driver in use: forcedeth
        Kernel modules: forcedeth

00:08.0 0101: 10de:03f6 (rev a2) (prog-if 85 [Master SecO PriO])
        Subsystem: 1458:b002
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
        I/O ports at 09f0 [size=8]
        I/O ports at 0bf0 [size=4]
        I/O ports at 0970 [size=8]
        I/O ports at 0b70 [size=4]
        I/O ports at dc00 [size=16]
        Memory at fd005000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2
        Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
        Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+
        Kernel driver in use: sata_nv
        Kernel modules: sata_nv

00:09.0 0604: 10de:03e8 (rev a2)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 0000b000-0000bfff
        Memory behind bridge: f8000000-faffffff
        Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
        Capabilities: [40] Subsystem: 10de:0000
        Capabilities: [48] Power Management version 2
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
        Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
        Capabilities: [80] Express Root Port (Slot+), MSI 00
        Capabilities: [100] Virtual Channel <?>
        Kernel driver in use: pcieport-driver
        Kernel modules: shpchp

00:18.0 0600: 1022:1200
        Flags: fast devsel
        Capabilities: [80] HyperTransport: Host or Secondary Interface

00:18.1 0600: 1022:1201
        Flags: fast devsel

00:18.2 0600: 1022:1202
        Flags: fast devsel

00:18.3 0600: 1022:1203
        Flags: fast devsel
        Capabilities: [f0] Secure device <?>

00:18.4 0600: 1022:1204
        Flags: fast devsel

01:07.0 0280: 13d0:2103 (rev 02)
        Subsystem: 13d0:2103
        Flags: bus master, slow devsel, latency 32, IRQ 17
        Memory at fc000000 (32-bit, non-prefetchable) [size=64K]
        I/O ports at a000 [size=32]
        Kernel driver in use: b2c2_flexcop_pci
        Kernel modules: b2c2-flexcop-pci

01:09.0 0200: 10ec:8169 (rev 10)
        Subsystem: 187e:330b
        Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
        I/O ports at a400 [size=256]
        Memory at fc010000 (32-bit, non-prefetchable) [size=256]
        [virtual] Expansion ROM at 88000000 [disabled] [size=128K]
        Capabilities: [dc] Power Management version 2
        Kernel driver in use: r8169
        Kernel modules: r8169

02:00.0 0300: 10de:0392 (rev a1)
        Subsystem: 1458:341a
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
        Memory at e0000000 (64-bit, prefetchable) [size=256M]
        Memory at f9000000 (64-bit, non-prefetchable) [size=16M]
        I/O ports at b000 [size=128]
        [virtual] Expansion ROM at fa000000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
        Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
        Capabilities: [78] Express Endpoint, MSI 00
        Capabilities: [100] Virtual Channel <?>
        Capabilities: [128] Power Budgeting <?>
        Kernel driver in use: nvidia
        Kernel modules: nvidiafb, nvidia

I have a problem with this card. It works fine with VDR in core/hybrid but MD won't boot until the card is installed in server.

PS. Also I have another Technisat SkyStar 2 TV PCI rev.2.8A but it's not supported by 810.

3

Users / Re: DVB Cards info needed for Templates

« on: January 11, 2010, 08:53:46 pm »

Code: [Select]

sudo v4l2-ctl -n
Failed to open /dev/video0: No such file or directory

4

Users / Re: DVB Cards info needed for Templates

« on: January 11, 2010, 06:55:35 pm »

It seems that you should run that command with specific device:

Code: [Select]

sudo v4l2-ctl -n -d /dev/dvb/adapter0/frontend0

v4l2-ctl -n -d /dev/dvb/adapter0/frontend0

Code: [Select]

Failed to open /dev/dvb/adapter0/frontend0: Device or resource busy
 

/etc/init.d/vdr stop

v4l2-ctl -n -d /dev/dvb/adapter0/frontend0

Code: [Select]

ioctl: VIDIOC_ENUMINPUT
 

5

Users / Re: DVB Cards info needed for Templates

« on: January 10, 2010, 01:31:02 pm »

TechniSat SkyStar 2 TV rev.2.6D

lspci -vn

Code: [Select]

00:00.0 0500: 10de:03ea (rev a1)
        Subsystem: 1458:5001
        Flags: bus master, 66MHz, fast devsel, latency 0
        Capabilities: [44] HyperTransport: Slave or Primary Interface
        Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-

00:01.0 0601: 10de:03e0 (rev a2)
        Subsystem: 1458:0c11
        Flags: bus master, 66MHz, fast devsel, latency 0

00:01.1 0c05: 10de:03eb (rev a2)
        Subsystem: 1458:0c11
        Flags: 66MHz, fast devsel, IRQ 5
        I/O ports at c400 [size=64]
        I/O ports at 1c00 [size=64]
        I/O ports at 1c40 [size=64]
        Capabilities: [44] Power Management version 2
        Kernel driver in use: nForce2_smbus
        Kernel modules: i2c-nforce2

00:01.2 0500: 10de:03f5 (rev a2)
        Subsystem: 1458:0c11
        Flags: 66MHz, fast devsel

00:02.0 0c03: 10de:03f1 (rev a3) (prog-if 10)
        Subsystem: 1458:5004
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
        Memory at fd006000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2
        Kernel driver in use: ohci_hcd
        Kernel modules: ohci-hcd

00:02.1 0c03: 10de:03f2 (rev a3) (prog-if 20)
        Subsystem: 1458:5004
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
        Memory at fd007000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [44] Debug port: BAR=1 offset=0098
        Capabilities: [80] Power Management version 2
        Kernel driver in use: ehci_hcd
        Kernel modules: ehci-hcd

00:04.0 0604: 10de:03f3 (rev a1) (prog-if 01)
        Flags: bus master, 66MHz, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 0000a000-0000afff
        Memory behind bridge: fb000000-fcffffff
        Prefetchable memory behind bridge: 88000000-880fffff
        Capabilities: [b8] Subsystem: 1458:026f
        Capabilities: [8c] HyperTransport: MSI Mapping Enable+ Fixed-

00:05.0 0403: 10de:03f0 (rev a2)
        Subsystem: 1458:a002
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
        Memory at fd000000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [44] Power Management version 2
        Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable-
        Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
        Kernel driver in use: HDA Intel
        Kernel modules: snd-hda-intel

00:06.0 0101: 10de:03ec (rev a2) (prog-if 8a [Master SecP PriP])
        Subsystem: f458:5002
        Flags: bus master, 66MHz, fast devsel, latency 0
        [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
        [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
        [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
        [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
        I/O ports at f000 [size=16]
        Capabilities: [44] Power Management version 2
        Kernel driver in use: pata_amd
        Kernel modules: pata_amd

00:07.0 0680: 10de:03ef (rev a2)
        Subsystem: 1458:e000
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 222
        Memory at fd004000 (32-bit, non-prefetchable) [size=4K]
        I/O ports at c800 [size=8]
        Capabilities: [44] Power Management version 2
        Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/3 Enable+
        Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
        Kernel driver in use: forcedeth
        Kernel modules: forcedeth

00:08.0 0101: 10de:03f6 (rev a2) (prog-if 85 [Master SecO PriO])
        Subsystem: 1458:b002
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
        I/O ports at 09f0 [size=8]
        I/O ports at 0bf0 [size=4]
        I/O ports at 0970 [size=8]
        I/O ports at 0b70 [size=4]
        I/O ports at dc00 [size=16]
        Memory at fd005000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2
        Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
        Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+
        Kernel driver in use: sata_nv
        Kernel modules: sata_nv

00:09.0 0604: 10de:03e8 (rev a2)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 0000b000-0000bfff
        Memory behind bridge: f8000000-faffffff
        Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
        Capabilities: [40] Subsystem: 10de:0000
        Capabilities: [48] Power Management version 2
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
        Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
        Capabilities: [80] Express Root Port (Slot+), MSI 00
        Capabilities: [100] Virtual Channel <?>
        Kernel driver in use: pcieport-driver
        Kernel modules: shpchp

00:18.0 0600: 1022:1200
        Flags: fast devsel
        Capabilities: [80] HyperTransport: Host or Secondary Interface

00:18.1 0600: 1022:1201
        Flags: fast devsel

00:18.2 0600: 1022:1202
        Flags: fast devsel

00:18.3 0600: 1022:1203
        Flags: fast devsel
        Capabilities: [f0] Secure device <?>

00:18.4 0600: 1022:1204
        Flags: fast devsel

01:07.0 0280: 13d0:2103 (rev 02)
        Subsystem: 13d0:2103
        Flags: bus master, slow devsel, latency 32, IRQ 17
        Memory at fc000000 (32-bit, non-prefetchable) [size=64K]
        I/O ports at a000 [size=32]
        Kernel driver in use: b2c2_flexcop_pci
        Kernel modules: b2c2-flexcop-pci

01:09.0 0200: 10ec:8139 (rev 10)
        Subsystem: 10ec:8139
        Flags: bus master, medium devsel, latency 64, IRQ 19
        I/O ports at a400 [size=256]
        Memory at fc010000 (32-bit, non-prefetchable) [size=256]
        [virtual] Expansion ROM at 88000000 [disabled] [size=64K]
        Capabilities: [50] Power Management version 2
        Kernel driver in use: 8139too
        Kernel modules: 8139cp, 8139too

02:00.0 0300: 10de:0392 (rev a1)
        Subsystem: 1458:341a
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
        Memory at e0000000 (64-bit, prefetchable) [size=256M]
        Memory at f9000000 (64-bit, non-prefetchable) [size=16M]
        I/O ports at b000 [size=128]
        [virtual] Expansion ROM at fa000000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
        Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
        Capabilities: [78] Express Endpoint, MSI 00
        Capabilities: [100] Virtual Channel <?>
        Capabilities: [128] Power Budgeting <?>
        Kernel driver in use: nvidia
        Kernel modules: nvidiafb, nvidia

sudo apt-get install ivtv-utils

sudo v4l2-ctl -n

Code: [Select]

Failed to open /dev/video0: No such file or directory

6

Users / Re: Can't download the Windows Orbiter installer

« on: January 09, 2010, 01:20:12 pm »

I have sent the latest CABs and the win32 MSI from my windows builder to possy for packaging.

-Thom

Thanks for the update Thom,
...
Richard

where can I get those new CABs?

all installers in /usr/pluto/installers is still 0 bytes in my fresh 0810 beta2

thnx

7

Users / Re: 8.10 beta2: VDR not running correctly

« on: December 28, 2009, 10:04:21 pm »

yes, I have the same problem with VDR.
8.10 b2

8

Developers / Re: 810 alpha2 Clock not updated on LinuxMCE menu.

« on: December 23, 2009, 08:15:12 am »

the clock still does not update until the screen changes.
Has this issue been fixed?

(8.10 beta2)

thnx

9

Users / Re: mythtv simultaneous?

« on: September 17, 2009, 11:45:50 pm »

Maybe I'm not understanding you...

Do you want to know if with a tv tuner card in the core and not in a MD, can you watch live tv on a MD?  Yes, and it's all automatic.  As long as you have a tuner on any LinuxMCE box that isn't being used, you can use it for live TV on any MD.  

Do you want to know if you can watch 1 channel, using just one tuner, live on multiple MDs at the same time?  That's the question we've been discussing, but maybe not what you are really asking about.

Thanks for your patience  

I would like to know, can I watch 1 channel, using just one tuner in the Core (not in a MD), live on multiple MDs at the same time

10

Users / Re: mythtv simultaneous?

« on: September 17, 2009, 10:28:41 pm »

I think the real question is can you start live TV on one MD and "broadcast" it out to all MDs.  No clue, never had a reason to try something like that.

no, question is about "broadcast" live tv from Core to all MDs (DVB-S tuner installed on the Core)

11

Users / Re: mythtv simultaneous?

« on: September 17, 2009, 08:21:33 pm »

sorry about my English, its in progress  

I'm going to setup my first LinuxMCE system: Core with one DVB-S card and two MDs
my questions is:
1. Is it possible to watch one satellite tv channel on MD1 and MD2 in the same time?
2. Is it possible to switch channels on MD1 and MythTV automatically switch channels on MD2 in the same time?

12

Users / Re: mythtv simultaneous?

« on: September 17, 2009, 01:34:21 pm »

if I'll change channel on one MD, can MythTV change channel simultaneously on all MDs?
(DVBS card installed in Core)

Ihar