Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - iberium

Pages: [1] 2
1
Feature requests & roadmap / html jumps
« on: January 01, 2014, 03:56:39 pm »
it would be nice to have html jumps in the pages so that when you are making changes and you click update,  that it goes back to the current position in the page instead of having to scroll back to where you were each time.  This can get tedious for things such as ordering of scenarios and such.

2
Users / child devices on new profile
« on: December 29, 2013, 04:14:55 pm »
How do I create a new device profile that contains child devices.  This way when I go and add the new device,  the child devices automatically come in?  It's just ir control,  so I don't want to go about creating a DCE device.

3
Users / zigbee remote
« on: December 29, 2013, 02:45:57 am »
I have a control4 zigbee remote i could donate if there is somebody that is capable of writing a driver for it.  Having a hard remote is almost a must,  I like using my phone for a remote,  but for the baby sitter or guests, its nice to have a regular remote.  This remote allows a menu to be downloaded to it somehow,  where you press the watch or listen button and you are presented with a menu on the screen where you can choose what you want to do,  it also has a list button where you can get to other functions.  I know this is just the way that the control4 project sends the data to it,  so it wouldn't have to work exactly like that.

4
Users / hauppauge hd pvr 1212
« on: August 24, 2013, 02:47:55 am »
What are the steps to install one of these?  We have plugged one in and it doesn't get detected. 

5
Users / qorbiter resolution
« on: May 27, 2013, 01:34:09 pm »
My wife just got a new Galaxy S4, and the words are so small, that you can't even get through setting it up.  Is there a way to change the resolution for qorbiter?  Also,  how do I go about changing which skin it is using,  I would like to try the Aeon skin on this device.

6
Users / network redirection
« on: April 24, 2013, 02:11:34 am »
Something that I have noticed that is quite annoying is that when I try to go to a site that uses dyndns or a port that is forwarded to my core,  it automatically redirects me to the core.  So if I'm at home and trying to connect to a remote site for work and they use dyndns, then i get directed to my core instead of theirs.  The only way I have been able to get around itis to remote desktop into a remote site that does not use this and then do my work over that.  It is also doing it for any ports that I might need to connect to,  I can't use them if im using them at my location.

7
Users / remote
« on: April 20, 2013, 09:09:57 pm »
I have several URC remotes just sitting around.  I have the base station also that have serial control.  I would like to program them like I do other automation systems in that on your main page you just select watch cable, bluray, etc.  and it runs the macro and goes to the control page.  In Savant, the macro would send a string like "room_cable_box_1_power_on" which would tell the system to turn on that room to cable.  Then I would just send in commands like "volume_up", etc for control.  Is there a specification for this or a driver that allows control in this fashion.  I would basically like to be able to call scenarios either by serial input or by mapping ir codes.

8
Users / ip control
« on: March 25, 2013, 02:11:44 am »
I have a receiver that has multiple zones.  So what I have done is create 2 different templates, one for the main zone and one for the second zone.  In one room I have it attached to the main zone and in another, I am running it off of the second.  The problem seems to be that when I change rooms, that it is screws up the communication to the first room.  Is there someway that I should be setting this up differently?  I'm guessing that the problem is that because it is 2 separate devices, that it is trying to establish 2 separate connections to the same device?  Could I just make the second zone a child device and attach the other room to the child?

9
Users / qorbiter qt version
« on: February 23, 2013, 10:01:50 pm »
I've got a vmware running of android 4.1 and whenever i try to load qorbiter, it says that i have the wrong qt version.  What version of android should i be using?

10
Users / mediatomb
« on: February 17, 2013, 03:26:10 pm »
I have a sharp tv, and when I go to browse for dlna devices, only mythtv shows up (on my computers, both mediatomb and mythtv show).  All of the media that I want to play is stored in media tomb,  what do I need to do to resolve this.  Do I need to copy my mediatomb media over to mythtv?

11
Users / repeating ir
« on: February 09, 2013, 03:54:34 pm »
Is it possible to have a repeating code?  For example, the volume.  This way you can hold down the button and have it keep sending it.

12
Users / virtual devices
« on: December 25, 2012, 09:56:51 pm »
I was working on creating a few custom remotes as I need the color buttons and a few others.  I have watched the screen casts and have noticed that there are several virtual devices that are referenced (ex. -106).  Is there a way that I can reference what these virtual devices are?  My 106 device is my screen saver so I know this is incorrect.  Just trying to learn the ins and outs better.

13
Users / scenario order
« on: December 25, 2012, 02:37:50 pm »
Is there a way to adjust the order of scenarios?  I have a few that I created and they show up after the autogenerated ones, but I would like them first as I use them more.  Also, how do I delete some of the autogenerated scenarios?  Some of them still show up even though the hardware that generated them is gone, I have them disabled, but there are so many of them that wouldn't work if I reenabled them anyways.

14
Users / Multiple Outputs
« on: December 09, 2012, 11:12:26 pm »
Is there a way that I can have a device have multiple outputs?  I want to use my directv box hooked up to the living room tv via hdmi and the same box hooked up via component to my master bedroom.  When I try to make the pipes it does not give me an option to add an additional pipe.  If I enable the device to use more than one entertainment area, then I have the option in the additional room but it wants to delete the living room pipe as it already exists.  Is there a work around or what is the procedure to add an additional output to a profile?  I looked in there and could not figure it out. 

15
Users / Media Storage
« on: December 02, 2012, 03:38:35 pm »
I just added an external usb hard drive that I would like to move my media to.  I have it setup using lmce file structure.  My questions are:

1)  What is the best way to move my media over to the new drive?  I have tried to just copy the files over but I can't transfer them as they are locked up under pluto_username ownership.  Am I able to chown the files or will this mess it up?

2)  If I add more drives, does lmce determine what the best location is to store the new files to?  So that the videos alias is actually a bunch of different drives showing up as one location?

3)  What is the best way to copy videos on to this new drive?  When I go to the share, only the old drive shows up under public.

Pages: [1] 2