Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - pointman87

Pages: [1] 2
1
Installation issues / ZWave Zstick Gen5 issues
« on: January 29, 2016, 09:45:22 am »
Hi all. After several broken nexa switches i decided to go with zwave instead. I have bought a zstick gen5, minimote and some fibaro dimmers and switches (both 2x1,5 and 1x2,5)
I plugged the zstick in the core (1404 AMD64) added DT1754, reload, sent ResetController, reload. Now when i go to advanced zwave i have node 1 (zstick) i press add node, then learn on the minimote, it gets added and a new child zwave controller shows up after reload. now in advanced zwave i have node 1 and 2, 2 being the minimote.

Now to my problem, if i press include on the minimote i get red light (Secondary Controllers are not able to include Z-Wave products; the LED will stay solid red for 2 seconds to signify this before exiting Inclusion-Mode.). If i try add node in advanced zwave i can add one dimmer. after that i cant use add node anymore, nothing happens in the zwave device log. Am i missing something? Any clues why the minimote cant be used for inclusion?

Best Regards// Daniel

2
Users / Apache2
« on: October 28, 2015, 08:27:24 pm »
After todays update of the website-admin package apache2 can't start. After the update the /etc/apache2/apache2.conf only consist of one line: ServerName DCERouter

Restoring the backed up apache2.conf gets it going again

3
Users / VDR Crash after last update
« on: October 20, 2015, 01:28:45 pm »
After the latest apt-get upgrade VDR aint working anymore. When pushing TV it starts TV and after about 10 seconds the router crashes and reloads. The reload takes about 3 minutes. When pushing TV the TV-control orbiter screen isn't showing.

4
Installation issues / 12.04 31133/31187/31214
« on: August 24, 2015, 10:20:03 pm »
Hi, after an apt-get dist-upgrade and a reboot my MDs just halt at the terminal login prompt. After some digging i found that FirstBoot = false was missing from /etc/pluto.conf, preventing /etc/init.d/linuxmce from running. Adding it and reboot or manually running the init script got things going again.

Sorry for not having the exact update versions as it was some time since my last upgrade.

BR Daniel

5
Installation issues / Pluto-vdr
« on: March 18, 2015, 08:49:55 pm »
yesterday i did an apt-get upgrade and got pluto-vdr 2.0.0.46.15030330130 installed. After install VDR was broken, downgrade back to 2.0.0.46.14081629241 got vdr working again.

6
Developers / VDR need to use UTF-8
« on: February 05, 2014, 09:26:06 pm »

http://svn.linuxmce.org/trac/ticket/2063

In order to use characters other than the english standard set (in my case swedish Å Ä Ö) we need to use UTF-8 instead of ansi.

VDR_CHARSET_OVERRIDE=UTF-8  needs to be added to /etc/default/vdr

7
Users / MP4 Crash
« on: March 10, 2013, 09:42:58 pm »
Hi all, i have a problem with Mp4 videos. If i play them one by one it works very good but if i queue let say 2 files xine crashes when it change file. I then have to do multiple reloads before xine comes back up an i can start i new file.

BR Daniel

8
Users / Phonelines
« on: July 12, 2012, 08:54:05 pm »
Hi all. Would it be possible to make it so users with only 1 phone line would not have to use a prefix? Reason I'm asking is that many phone can't handle auto appending a prefix. In my case i have a Doro IP880dect that can't do that, forcing me to dial a number rather that just call from the missed call list.

BR Daniel

9
Installation issues / mce_usb2 ir blaster broke
« on: June 07, 2012, 05:13:03 pm »
On 17/5-12 i did apt-get update && apt-get upgrade, after that my mce_usb2 ir blaster stopped working. Do anyone know what happened around that time, or do anyone know where to start dig?

BR Daniel

10
Installation issues / AVWizard loop
« on: April 23, 2012, 07:09:10 pm »
I installed my headless core with LMCE-1004-20120413131325885, wish went so smooth that i couldn't believe my eyes, very great job with the LiveDVD L3mce.

Now to the problem. My livingroom MD with a nvidia GTX-560 are driving me nuts. I have installed nvidia-current through x-swat repo, the version is 295.40. When it is about the initialize X it unloads the nvidia module, causing Failed to setup X screen.
If i ssh to the MD on boot and modprobing the nvidia module X fires up and give me AVWizard. I complete it and get a fully working MD, BUT, if i reboot the MD I'm back a zero again, having to ssh, modprobe, complete AVWizard to be able to use the MD.

/etc/pluto.conf shows AVWizardOverride = 0
                              AVWizardDone = 1
                              FirstBoot = false

How do i get the MD to understand that AVWizard is done and not to touch the nvidia module?

BR, Daniel

11
Users / VDR stream issue
« on: March 03, 2012, 09:17:34 pm »
Hi everybody. I have a non LMCE specific problem with VDR and i can't find info anywhere so I'm trying here.

I can watch VDR for some time on my MD but after a while the stream freezes and the syslog on the MD starts to fill up with:


Mar  3 20:22:53 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: no payload, size 0
Mar  3 20:22:53 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: no payload, size 0
Mar  3 20:22:53 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: payload not PES ?
Mar  3 20:22:53 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: no payload, size 0
Mar  3 20:22:53 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: dropping broken PES packet
Mar  3 20:22:53 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: no payload, size 0
Mar  3 20:22:53 moon144 vdr-sxfe[4636]: last message repeated 4 times
Mar  3 20:22:53 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: payload not PES ?
Mar  3 20:22:53 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: dropping broken PES packet
Mar  3 20:22:53 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: no payload, size 0
Mar  3 20:22:53 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: no payload, size 0
Mar  3 20:22:53 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: payload not PES ?
Mar  3 20:22:53 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: dropping broken PES packet
Mar  3 20:22:53 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: no payload, size 0
Mar  3 20:22:54 moon144 vdr-sxfe[4636]: last message repeated 2 times
Mar  3 20:22:54 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: payload not PES ?
Mar  3 20:22:54 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: dropping broken PES packet
Mar  3 20:22:54 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: no payload, size 0
Mar  3 20:22:54 moon144 vdr-sxfe[4636]: last message repeated 5 times
Mar  3 20:22:54 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: payload not PES ?
Mar  3 20:22:54 moon144 vdr-sxfe[4636]: [4649] [demux_vdr] ts2es: dropping broken PES packet


It continues like that until i turn off VDR. I then have to /etc/init.d/vdr restart on the core to be able to watch again.
Is someone else experiencing the same issue with VDR?

Best regards, Daniel

12
Users / Super 1004
« on: January 08, 2012, 11:08:17 am »
I just want to tell the community that i on my 1004 install with core and 3 MDs have work phones (in/out calls), working vdr with SC to all MDs, working lights with tellstick all media plays (exept for flash that laggs like hell) and 1 droid and 2 ios orbiters.

Thank you devs and maybe its 1004 release soon?  ;)

BR Daniel

13
Users / Plug & Play
« on: January 04, 2012, 09:07:39 am »
Im getting some strange behavior both in 8.10 and 10.04. On my living room MD i have attached a devon receiver, a LG tv, a tellstick, one gyration remote and a bluetooth dongle. The problem is that every time i reboot that MD, the tellstick, denon and LG are being rediscovered and I'm being kicked in to Sarah and have to reload, then it work until the next time i reboot. Does anyone have a similar behavior?

BR Daniel

14
Installation issues / Pluto-mplayer
« on: January 03, 2012, 11:23:35 pm »
I noticed that mplayer and pluto-mplayer isn't installed on any of my MDs in 1004, only pluto-mplayer-player. installing mplayer and pluto-mplayer made a couple of .mkv movies work with both video and audio.
So my question, should pluto-mplayer-player depend on pluto-mplayer and mplayer?

BR Daniel

15
Users / Asterisk Prefix
« on: December 30, 2011, 12:19:55 pm »
HI everybody and happy holidays or as we say in sweden, God Fortsättning!

Im on 1004 and I configured my provider (affinity telecom) in phonelines and incoming calls are working as expected. Outgoing on the other hand aren't. Im getting dial tone when I'm dialing a number but the call don't arrive. My first clue is in asterisk log where i get [Dec 30 11:53:23] WARNING[26756] pbx.c: Don't know what to do with 'SIP/0X6X80X9X9-00000002'

I think as an outgoing call should look like sip:number you dial@provider server.
I noticed the option Prefix in phone lines menu, should i put something in there or is it unrelated to this error?

Best regards /Daniel

Pages: [1] 2