Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - zim

Pages: [1]
Users / Subtitles possision
« on: February 24, 2011, 04:51:31 pm »

Can You please help me whit subtitles,

They are loading correct but are "to low" that I can see them just where there are 2 lines.

Im trying to edit xine.conf:

misc.spu_vertical_offset - putting values 1,2,5 but no result

File is correct because if I change :

misc.spu_subtitle_size: its working.

Please help.


Users / RMVB
« on: November 25, 2010, 07:54:28 pm »

Is there a way to make LMCE to play rmvb files ? Now there is just sound.


Marketplace / Looking Charging Cradle for WebDT366(AtiigoT)
« on: November 22, 2010, 12:30:56 pm »

As in title, if some one has spare one (best in Europe), please let me know.


Users / Media Scenario Orbiter Screen
« on: November 21, 2010, 12:03:35 am »

Im trying to set my cable box and LinuxMCE,

Cable box is ADB-5800 I have made temple for id learn IR codes, its convected to my tv true HDMI.

I made Media scenario, but screen which was generated isnt working. Numeric buttons dont change channels, and many more. My question is there a way to decide what should be on that screen ?



Maby differently,

How to assign ir codes to buttons on orbiret screen ?

Developers / New language Polish(Polski)
« on: November 15, 2010, 11:04:37 pm »
Hello All,

Im trying to translate LinuxMce to my home language.

I have send first part by sqlCSV, can some one check if its OK ?

I will be updating this daily, depending from time which i have for translating.

Best regards,

Users / MythTV problem
« on: October 24, 2010, 01:53:37 pm »
Hi All,

I have a problem whit MythTV, it is saying "error:Mythtv is using all inputs, but there are no active recordings ?" and after OK it saying that MYTH tv backed has a problem and making reset.

Clear DVD install, last snapshot 23357.

Tv tuner is Hauppauge WinTV-PVR-USB2, every thing made during initial set-up.

What can be wrong where to start looking?



Now when im turning tv screen of mythtv is waking up but nothing is happening

in logs mythbackend.log i can see some thing like this:

2010-10-24 21:34:21.755 TVRec(7): Changing from None to WatchingLiveTV
2010-10-24 21:34:21.799 TVRec(7): HW Tuner: 7->7
2010-10-24 21:34:21.861 ProgramInfo(): Updated pathname '':'' -> '1040_20101024213421.nuv'
2010-10-24 21:34:21.879 NVR(/dev/video0): Unknown video codec.  Please go into the TV Settings, Recording Profiles and setup the four 'Software Encoders' profiles.  Assuming RTjpeg for now.
2010-10-24 21:34:21.879 NVR(/dev/video0) Error: Unknown audio codec
2010-10-24 21:34:21.892 NVR(/dev/video0): Won't work with the streaming interface, falling back
2010-10-24 21:34:21.895 AutoExpire: CalcParams(): Max required Free Space: 2.0 GB w/freq: 15 min
cannot open vbi device
2010-10-24 21:34:21.909 NVR(/dev/video0) Error: Failed to set audio
         eno: Invalid argument (22)
2010-10-24 21:34:21.918 ProgramInfo(): Updated pathname '':'' -> '1040_20101024213421.nuv'
2010-10-24 21:34:21.924 NVR(/dev/video0) Error: Can't open vbi device: ''
VIDIOCGMBUF:: Invalid argument
2010-10-24 21:34:21.948 ProgramInfo(): Updated pathname '':'' -> '1040_20101024213421.nuv'
2010-10-24 21:34:36.270 ProgramInfo(): Updated pathname '':'' -> '1040_20101024213421.nuv'

Im just thinking that this card is not pnp as in wiki :)

Please help.....

Users / DivX problem
« on: October 19, 2010, 09:10:47 am »
Hello All,

I have problem whit quality of image when watching divx(avi) files. Normal splash screen UI2 is perfect. But when there is fast action on move i can see lost of vertical lines on screen.

My hybrid(last snapshot, DVD install) is DELL 755/4GB ram/Gigabite 8600 GS video card connected true hdmi to full hd lcd.

I was trying to update Nvidia drivers according to wiki ( Every thing goes fine exept "sudo cat /proc/driver/nvidia/version" showing no file or directory. And when I reboot hybrid i still can seen Nvidia drivers 195.10.16 so default ones.

Can You please tell me if this can be drivers issiue, and if it is what im doing wrong in drivers upgrade.

Best regards,


Users / UIRT2
« on: October 14, 2010, 10:30:30 pm »

Did some one used that whit LMCE ?

Is it worth to build that?

Best regards,

Users / Strange network problem
« on: October 06, 2010, 08:33:56 am »
Hello All,

I'm very new to LinuxMCE but very impressed by its possibility.

I build my core/md on Dell Optiflex 755 whit 2 NIC cards,

One is connected to my routed D-link and second one (internal) to giga-swith.

I have internet in core (YouTube etc.) after disable firewall I can access admin page from external lan.

When im connecting from internal side i'm getting IP ( I can ping to core ( but I don't have internet(in DHCP settings there is no gate) ant I cant access admin page or shares (\\\)

I don't think there is lan card issue, it looks like core doesn't allow me to access any thing from internal network,

Pleas help....


Pages: [1]