Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - pw44

Pages: [1] 2 3 ... 8
1
Installation issues / pluto-dcerouter kept back on upgrade.
« on: June 11, 2013, 05:35:41 pm »
Hyia,
during the last apt-get upgrade, i got the following:

The following packages have been kept back:
  gvfs gvfs-backends linux-generic linux-headers-generic linux-image-generic pluto-dcerouter
The following packages will be upgraded:
  libx11-6 libx11-data libx11-dev libxcb-render0 libxcb-shape0 libxcb-shm0 libxcb-xv0 libxcb1 libxcb1-dev libxext-dev
  libxext6 libxi6 libxrender1 libxt-dev libxt6 libxtst6 libxxf86vm1

Shouldn't pluto-dceroute be upgraded?

Best regards,

pw44

2
Installation issues / DHCP server not starting - SOLVED
« on: June 02, 2013, 06:25:13 pm »
Hya,
yesterday, i did an update and upgrade, and since then, dhcp is having problems.
The dhcp server fails on start.
Was anything changed?
Best regards.

Found the problem:
error in syslog:
dhcpd: Open a socket for LPF: Permission denied
The bug was recognized and fixed for 12.04
<https://bugs.launchpad.net/ubuntu/+...107686> but
not for 10.04. It may have to do with the server change; with 10.04 the
dhcp server is 'dhcp3-server', and with 12.04 it is 'isc-dhcp-server'.
Anyway, to fix edit:

/etc/apparmor.d/usr.sbin.dhcpd3

#FROM:
network inet raw,
network packet packet,

#TO:
network inet raw,
network packet packet,
network packet raw,

Then reload apparmor:
sudo service apparmor reload

And then the dhcp server will now start:
sudo service dhcp3-server start

3
Users / Asterisk SCCP 7970 Buttons.
« on: March 03, 2013, 09:36:19 pm »
Hya,
I do have 4 phone extensions at home, 2 of them on SCCP channel, with 2 Cisco 7970 and 2 SIP on siphones. I could alter the buttonconfig table, so to make one of the 7970 have 2 line buttons (one for it's extension and the second for the other 7970 extension).
I would like to also have buttons 3 and 4 of this 7970 assigned to the other 2 sip extensions and button 5 to my doorbell?
I did enter the 2 sip extensions in the buttonconfig table, but the 7970 only shows the first 2 buttons assigned to the sccp extensions.
Does anyone knows how to have buttons 3 and 4 assigned to the sip extensons and button 5 to my doorbell?
Thx in advance.
Paulo

4
Users / Asterisk AST_CONFIG - lost entries
« on: March 01, 2013, 11:54:58 pm »
Hya,
today i discovered that some directives i've inserted into the asteriks ast_table were lost, after an update (don' t know which).
All the entries regarding NAT, EXTERNIP, LOCALNET and so on, to enable remote extensions simply disapeared.
As i had the external extension working, and after for coincidence updated ios and softphone i did for the last four weeks try to fix the problem on the softphone configs, with not luck, until i looked into the asterisk config to discover my directives were not there.
Would be nice if the updates do not delete the custom entries.
Best regards.

5
Users / Asterisk CDR registering error.
« on: February 26, 2013, 12:23:34 am »
Hya,
browsing the Asterisk CDR table, i did note the it registers wrong. Incoming calls coming via my SPA3102 is registered as caller id "Unknown Caller" <2122498618>, which is my POTS number.
Code: [Select]
calldate clid src dst dcontext channel dstchannel lastapp lastdata duration billsec disposition amaflags accountcode userfield uniqueid
2013-02-24 20:46:54 "Unknown Caller" <2122498618> 2122498618 2122498618 from-trunk SIP/2122498618-00000009 Local/204@trusted-cac0;1 Set TIMEOUT(response)=20 41 11 ANSWERED 3     1361749614.37
Is this error known?
TIA






6
Users / CDR not showing incoming numbers.
« on: December 15, 2012, 04:05:28 pm »
Hi,
i did note that the CDR records of asterisk only shown the trunk numbers, not the dialed or incoming calling numbers.
Best regards!

7
Users / FREE Dial in Number in Los Ageles.
« on: November 17, 2012, 03:14:37 pm »
Hi,
does anyone knows about free dial in number (for asterisk) in Los Angeles, or at least a low rate flat dial in number service in Los Angeles?
Thx in advance for any hint or help.
Paulo

8
Installation issues / LMCE as complete security system.
« on: October 17, 2012, 02:51:20 am »
Hi,
i did purchase a 20.000 sq feet land yard and will build a new house. I'm planning to use lmce as the heart and core of this new house and also be the security controller.
Which would be the best technology integrated with lmce to build up the security, with perimeter and motion sensors, alarm panels and lightning, to have it secure? KNX, Z-wave, X-10?
Help are very welcome.
TIA,
Paulo


9
Installation issues / Use LMCE directory structure - other?
« on: September 21, 2012, 12:48:32 am »
Hya,
my raid 5 array, with all my media, which worked on lmce 8.10 was also added to lmce 10.04, and i defined to use LMCE directory structure, as used under 8.10.
The strange is that an "other" directory is created and so there is no more public and private files.
Is it normal for 10.04?

webExecLog.log:17-09-2012 00:18:51      stat --format="%F" -L "/home/public/data/other/Software Raid 5 [32]/public"
webExecLog.log:17-09-2012 00:18:51      stat --format="%F" -L "/home/public/data/other/Software Raid 5 [32]/lmce-ubuntu"
webExecLog.log:17-09-2012 00:18:51      stat --format="%F" -L "/home/public/data/other/Software Raid 5 [32]/user_1"
webExecLog.log:17-09-2012 00:18:51      stat --format="%F" -L "/home/public/data/other/Software Raid 5 [32]/.directory"
webExecLog.log:17-09-2012 00:18:51      stat --format="%F" -L "/home/public/data/other/Software Raid 5 [32]/apps"
webExecLog.log:17-09-2012 00:18:51      stat --format="%F" -L "/home/public/data/other/Software Raid 5 [32]/user_4"
webExecLog.log:17-09-2012 00:18:51      stat --format="%F" -L "/home/public/data/other/Software Raid 5 [32]/user_3"
webExecLog.log:17-09-2012 00:18:51      stat --format="%F" -L "/home/public/data/other/Software Raid 5 [32]/user_2"
webExecLog.log:17-09-2012 00:18:51      stat --format="%F" -L "/home/public/data/other/Software Raid 5 [32]/.Trash-0"
webExecLog.log:17-09-2012 00:18:51      stat --format="%F" -L "/home/public/data/other/Software Raid 5 [32]/lost+found"
webExecLog.log:17-09-2012 00:18:51      stat --format="%F" -L "/home/public/data/other/Software Raid 5 [32]/public"
webExecLog.log:17-09-2012 00:18:55      stat --format="%F" -L "/home/public/data/other/Software Raid 5 [32]/public/data"
webExecLog.log:17-09-2012 00:18:55      stat --format="%F" -L "/home/public/data/other/Software Raid 5 [32]/public"
webExecLog.log:17-09-2012 00:18:55      stat --format="%F" -L "/home/public/data/other/Software Raid 5 [32]/public"
webExecLog.log:17-09-2012 00:18:55      stat --format="%F" -L "/home/public/data/other/Software Raid 5 [32]/public/data"
webExecLog.log:17-09-2012 00:18:57      stat --format="%F" -L "/home/public/data/other/Software Raid 5 [32]/public/data"
webExecLog.log:17-09-2012 00:18:57      stat --format="%F" -L "/home/public/data/other/Software Raid 5 [32]/public/data"
webExecLog.log:17-09-2012 00:18:57      stat --format="%F" -L "/home/public/data/other/Software Raid 5 [32]/public/data"
webExecLog.log:17-09-2012 00:18:57      stat --format="%F" -L "/home/public/data/other/Software Raid 5 [32]/public/data"
webExecLog.log:17-09-2012 00:18:57      stat --format="%F" -L "/home/public/data/other/Software Raid 5 [32]/public/data"
webExecLog.log:17-09-2012 00:18:57      stat --format="%F" -L "/home/public/data/other/Software Raid 5 [32]/public/data"
webExecLog.log:17-09-2012 00:18:57      stat --format="%F" -L "/home/public/data/other/Software Raid 5 [32]/public/data"
webExecLog.log:17-09-2012 00:18:57      stat --format="%F" -L "/home/public/data/other/Software Raid 5 [32]/public/data/audio"

I did remove the "other" directory and the next UpdateMedia made all right again.

TIA

10
Installation issues / Unable to add generic pc as MD - template 28
« on: September 16, 2012, 05:22:29 pm »
Hya,
when i try to add a media director, generic pc as md, template 28, nothing is found, then i try via id of device template, 28 and get the following message: ERROR: the device template does not exist or invalid controlled via
What is wrong?
TIA
Paulo

11
Developers / Missing asterisk directives.
« on: September 16, 2012, 03:23:26 pm »
Hya,

installing my sip line (voipcheap), i did note it did not register.
So, looking into the database, table ast_config, i noted that some directives were missing.

Code: [Select]
83 0 18 0 sip.conf general alwaysauthreject yes
85 0 18 0 sip.conf general nat                        yes
86 0 60 0 sip.conf general externhost        mydyndns.homeunix.org
87 0 5 0 sip.conf general externrefresh        5
88 0 60 0 sip.conf general localnet               192.168.80.0/255.255.255.0
89 0 9 0 sip.conf general allow                g729
90 0 10 0 sip.conf general allow                g723
91 0 101 0 sip.conf general register                pwollny:XXXXXXXXX@sip.voipcheap.com/2062036594
The 83 is very inportant for fail2ban and 85-88 to have the NAT.
I also would like to know which are the rules for cat_metric and var_metric.

Anyway, my sip line register, but i keep getting
Code: [Select]
> doing dnsmgr_lookup for 'sip.voipcheap.com'
       > doing dnsmgr_lookup for 'sip.voipcheap.com'
       > doing dnsmgr_lookup for 'sip.voipcheap.com'
       > doing dnsmgr_lookup for 'sip.voipcheap.com'
       > doing dnsmgr_lookup for 'sip.voipcheap.com'
in the asterisk verbose, i can place calls, but no sound incoming and outgoing and receiving a call is rejected with "no service message" in my asterisk.

Way to solve it?

TIA



12
Installation issues / Voip problem 10.04
« on: September 15, 2012, 11:08:11 pm »
Hya,
lmce 10.04 installed, SIP line configured, asterisk shows it's registered
Code: [Select]
dcerouter*CLI> sip show registry
Host                                    dnsmgr Username       Refresh State                Reg.Time                
sip.voipcheap.com:5060                  N      pwollny            105 Registered           Sat, 15 Sep 2012 18:01:16
1 SIP registrations.
I call to the number from my mobile, no of the phones (obiter and cisco 7970) rings, i hear the message "the number...(ss-noservice.gsm)   and asterisk shows the following:
Code: [Select]
== config parameter meetmeopts '' != 'qxd'
    -- Added device 'SEP00137FFD944B' (7970)
    -- SEP00137FFD944B: asked our protocol capability (20).
    -- SEP00137FFD944B: Phone protocol capability : 12
    -- SEP00137FFD944B: Our protocol capability  : 20
    -- SEP00137FFD944B: Joint protocol capability : 11
    -- SEP00137FFD944B: Ask the phone to send keepalive message every 48 seconds
    -- SEP00137FFD944B: d->softkeyDefinition=!
    -- SEP00137FFD944B: Sending ConfigStatMessage, lines 1, speeddials 0
    -- SEP00137FFD944B: Device has 8 Capabilities
    -- Added extension '201' priority 1 to sccpregistration
    -- SEP00137FFD944B: Got Forward Status Request.  Line: 1
    -- SEP00137FFD944B: Device registered; performing post registration tasks...
 00000000 - 03 00 00 00 01 00 00 00 00 00 00 00             ............
    -- SCCP: Accepted connection from 192.168.80.131
    -- SCCP: Accepted connection from 192.168.80.131
    -- SCCP: Using ip 192.168.80.1
    -- SCCP: Using 245760 memory for this thread
  == Using SIP RTP CoS mark 5
    -- Executing [2062036594@from-sip-external:1] NoOp("SIP/sip.voipcheap.com-00000000", "Received incoming SIP connection from unknown peer to 2062036594") in new stack                                                                              
    -- Executing [2062036594@from-sip-external:2] Set("SIP/sip.voipcheap.com-00000000", "DID=2062036594") in new stack
    -- Executing [2062036594@from-sip-external:3] Goto("SIP/sip.voipcheap.com-00000000", "s,1") in new stack
    -- Goto (from-sip-external,s,1)
    -- Executing [s@from-sip-external:1] GotoIf("SIP/sip.voipcheap.com-00000000", "0?from-trunk,2062036594,1") in new stack
    -- Executing [s@from-sip-external:2] Set("SIP/sip.voipcheap.com-00000000", "TIMEOUT(absolute)=15") in new stack
Channel will hangup at 2012-09-15 18:01:08.718 BRT.
    -- Executing [s@from-sip-external:3] Answer("SIP/sip.voipcheap.com-00000000", "") in new stack
    -- Executing [s@from-sip-external:4] Wait("SIP/sip.voipcheap.com-00000000", "2") in new stack
    -- Executing [s@from-sip-external:5] Playback("SIP/sip.voipcheap.com-00000000", "ss-noservice") in new stack
    -- <SIP/sip.voipcheap.com-00000000> Playing 'ss-noservice.gsm' (language 'en')
    -- Executing [s@from-sip-external:6] PlayTones("SIP/sip.voipcheap.com-00000000", "congestion") in new stack
    -- Executing [s@from-sip-external:7] Congestion("SIP/sip.voipcheap.com-00000000", "5") in new stack
  == Spawn extension (from-sip-external, s, 7) exited non-zero on 'SIP/sip.voipcheap.com-00000000'
    -- Executing [h@from-sip-external:1] NoOp("SIP/sip.voipcheap.com-00000000", "Hangup") in new stack
When i try to place a call, it tries to call my DID number:
Code: [Select]
Verbosity was 3 and is now 4
    -- SEP00137FFD944B: Taken Offhook
    -- SEP00137FFD944B: Using line 201
    -- SCCP: SCCP/201-00000006,
capabilities: (slin16, ulaw/64k, alaw/64k, g729b, g729ab, g729, g729a, rfc2833)
preferences: (alaw/64k, alaw/56k, ulaw/64k, ulaw/56k)
remote caps: (nothing)
READ: (alaw/64k)
    -- SCCP: SCCP/201-00000006,
capabilities: (slin16, ulaw/64k, alaw/64k, g729b, g729ab, g729, g729a, rfc2833)
preferences: (alaw/64k, alaw/56k, ulaw/64k, ulaw/56k)
remote caps: (nothing)
        WRITE: (alaw/64k)
    -- SEP00137FFD944B: SCCP Digit: 00000009 (9) on line 201
 SCCP: reschedule dialing in '5000' ms
 SCCP: extension helper says that:
ignore pattern  : 0
exten_exists    : 0
exten_canmatch  : -1
exten_matchmore : -1
 SCCP: 9 Matches more
    -- SEP00137FFD944B: SCCP Digit: 00000000 (0) on line 201
 SCCP: reschedule dialing in '5000' ms
 SCCP: extension helper says that:
ignore pattern  : 0
exten_exists    : -1
exten_canmatch  : -1
exten_matchmore : -1
 SCCP: 90 Match More
    -- SEP00137FFD944B: SCCP Digit: 00000000 (0) on line 201
 SCCP: reschedule dialing in '5000' ms
 SCCP: extension helper says that:
ignore pattern  : 0
exten_exists    : -1
exten_canmatch  : -1
exten_matchmore : -1
 SCCP: 900 Match More
    -- SEP00137FFD944B: SCCP Digit: 00000005 (5) on line 201
 SCCP: ENBLOC EMU Cancelled (time per digit '579' > maximum '400')
 SCCP: reschedule dialing in '5000' ms
 SCCP: extension helper says that:
ignore pattern  : 0
exten_exists    : -1
exten_canmatch  : -1
exten_matchmore : -1
 SCCP: 9005 Match More
    -- SEP00137FFD944B: SCCP Digit: 00000005 (5) on line 201
 SCCP: reschedule dialing in '5000' ms
 SCCP: extension helper says that:
ignore pattern  : 0
exten_exists    : -1
exten_canmatch  : -1
exten_matchmore : -1
 SCCP: 90055 Match More
    -- SEP00137FFD944B: SCCP Digit: 00000002 (2) on line 201
 SCCP: reschedule dialing in '5000' ms
 SCCP: extension helper says that:
ignore pattern  : 0
exten_exists    : -1
exten_canmatch  : -1
exten_matchmore : -1
 SCCP: 900552 Match More
    -- SEP00137FFD944B: SCCP Digit: 00000001 (1) on line 201
 SCCP: reschedule dialing in '5000' ms
 SCCP: extension helper says that:
ignore pattern  : 0
exten_exists    : -1
exten_canmatch  : -1
exten_matchmore : -1
 SCCP: 9005521 Match More
    -- SEP00137FFD944B: SCCP Digit: 00000008 (8) on line 201
 SCCP: reschedule dialing in '5000' ms
 SCCP: extension helper says that:
ignore pattern  : 0
exten_exists    : -1
exten_canmatch  : -1
exten_matchmore : -1
 SCCP: 90055218 Match More
    -- SEP00137FFD944B: SCCP Digit: 00000008 (8) on line 201
 SCCP: reschedule dialing in '5000' ms
 SCCP: extension helper says that:
ignore pattern  : 0
exten_exists    : -1
exten_canmatch  : -1
exten_matchmore : -1
 SCCP: 900552188 Match More
    -- SEP00137FFD944B: SCCP Digit: 00000008 (8) on line 201
 SCCP: reschedule dialing in '5000' ms
 SCCP: extension helper says that:
ignore pattern  : 0
exten_exists    : -1
exten_canmatch  : -1
exten_matchmore : -1
 SCCP: 9005521888 Match More
    -- SEP00137FFD944B: SCCP Digit: 00000003 (3) on line 201
 SCCP: reschedule dialing in '5000' ms
 SCCP: extension helper says that:
ignore pattern  : 0
exten_exists    : -1
exten_canmatch  : -1
exten_matchmore : -1
 SCCP: 90055218883 Match More
    -- SEP00137FFD944B: SCCP Digit: 00000008 (8) on line 201
 SCCP: reschedule dialing in '5000' ms
 SCCP: extension helper says that:
ignore pattern  : 0
exten_exists    : -1
exten_canmatch  : -1
exten_matchmore : -1
 SCCP: 900552188838 Match More
    -- SEP00137FFD944B: SCCP Digit: 00000006 (6) on line 201
 SCCP: reschedule dialing in '5000' ms
 SCCP: extension helper says that:
ignore pattern  : 0
exten_exists    : -1
exten_canmatch  : -1
exten_matchmore : -1
 SCCP: 9005521888386 Match More
    -- SEP00137FFD944B: SCCP Digit: 00000001 (1) on line 201
 SCCP: reschedule dialing in '5000' ms
 SCCP: extension helper says that:
ignore pattern  : 0
exten_exists    : -1
exten_canmatch  : -1
exten_matchmore : -1
 SCCP: 90055218883861 Match More
    -- SEP00137FFD944B: SCCP Digit: 00000008 (8) on line 201
 SCCP: reschedule dialing in '5000' ms
 SCCP: extension helper says that:
ignore pattern  : 0
exten_exists    : -1
exten_canmatch  : -1
exten_matchmore : -1
 SCCP: 900552188838618 Match More
 SCCP: Timeout for call '6'. Going to dial '900552188838618'
    -- SCCP: Unable to cancel schedule ID 65.
    -- SEP00137FFD944B: (sccp_pbx_softswitch) New call on line 201
    -- SEP00137FFD944B: send callInfo of callid 6
    -- Executing [900552188838618@from-internal:1] Macro("SCCP/201-00000006", "dialout-trunk,SIP/2062036594,00552188838618,,")
    -- Executing [s@macro-dialout-trunk:1] Set("SCCP/201-00000006", "DIAL_TRUNK=SIP/2062036594") in new stack
    -- Executing [s@macro-dialout-trunk:2] Set("SCCP/201-00000006", "DIAL_NUMBER=00552188838618") in new stack
    -- Executing [s@macro-dialout-trunk:3] Set("SCCP/201-00000006", "ROUTE_PASSWD=") in new stack
    -- Executing [s@macro-dialout-trunk:4] GotoIf("SCCP/201-00000006", "1?noauth") in new stack
    -- Goto (macro-dialout-trunk,s,6)
    -- Executing [s@macro-dialout-trunk:6] GotoIf("SCCP/201-00000006", "0?disabletrunk,1") in new stack
    -- Executing [s@macro-dialout-trunk:7] Set("SCCP/201-00000006", "_NODEST=") in new stack
    -- Executing [s@macro-dialout-trunk:8] Set("SCCP/201-00000006", "DIAL_TRUNK_OPTIONS=tr") in new stack
    -- Executing [s@macro-dialout-trunk:9] Set("SCCP/201-00000006", "GROUP()=DIAL_TRUNK") in new stack
    -- Executing [s@macro-dialout-trunk:10] Macro("SCCP/201-00000006", "user-callerid,SKIPTTL") in new stack
    -- Executing [s@macro-user-callerid:1] NoOp("SCCP/201-00000006", "user-callerid: pl_57 201") in new stack
    -- Executing [s@macro-user-callerid:2] Set("SCCP/201-00000006", "AMPUSER=201") in new stack
    -- Executing [s@macro-user-callerid:3] GotoIf("SCCP/201-00000006", "0?report") in new stack
    -- Executing [s@macro-user-callerid:4] GotoIf("SCCP/201-00000006", "0?start") in new stack
    -- Executing [s@macro-user-callerid:5] Set("SCCP/201-00000006", "REALCALLERIDNUM=201") in new stack
    -- Executing [s@macro-user-callerid:6] NoOp("SCCP/201-00000006", "REALCALLERIDNUM is 201") in new stack
    -- Executing [s@macro-user-callerid:7] Set("SCCP/201-00000006", "AMPUSER=201") in new stack
    -- Executing [s@macro-user-callerid:8] Set("SCCP/201-00000006", "AMPUSERCIDNAME=") in new stack
    -- Executing [s@macro-user-callerid:9] GotoIf("SCCP/201-00000006", "1?report") in new stack
    -- Goto (macro-user-callerid,s,13)
    -- Executing [s@macro-user-callerid:13] NoOp("SCCP/201-00000006", "TTL:  ARG1: SKIPTTL") in new stack
    -- Executing [s@macro-user-callerid:14] GotoIf("SCCP/201-00000006", "1?continue") in new stack
    -- Goto (macro-user-callerid,s,23)
    -- Executing [s@macro-user-callerid:23] NoOp("SCCP/201-00000006", "Using CallerID "pl_57" <201>") in new stack
    -- Executing [s@macro-dialout-trunk:11] Macro("SCCP/201-00000006", "record-enable,201,OUT") in new stack
    -- Executing [s@macro-record-enable:1] GotoIf("SCCP/201-00000006", "0?2:4") in new stack
    -- Goto (macro-record-enable,s,4)
    -- Executing [s@macro-record-enable:4] AGI("SCCP/201-00000006", "recordingcheck,20120915-181545,1347743727.8") in new stack
    -- Launched AGI Script /usr/share/asterisk/agi-bin/recordingcheck
 recordingcheck,20120915-181545,1347743727.8: No AMPUSER db entry for 201. Not recording
    -- <SCCP/201-00000006>AGI Script recordingcheck completed, returning 0
    -- Executing [s@macro-record-enable:5] NoOp("SCCP/201-00000006", "No recording needed") in new stack
    -- Executing [s@macro-dialout-trunk:12] GotoIf("SCCP/201-00000006", "0?skipoutcid") in new stack
    -- Executing [s@macro-dialout-trunk:13] Set("SCCP/201-00000006", "DIAL_TRUNK_OPTIONS=") in new stack
    -- Executing [s@macro-dialout-trunk:14] Macro("SCCP/201-00000006", "outbound-callerid,SIP/2062036594") in new stack
    -- Executing [s@macro-outbound-callerid:1] GotoIf("SCCP/201-00000006", "1?start") in new stack
    -- Goto (macro-outbound-callerid,s,3)
    -- Executing [s@macro-outbound-callerid:3] NoOp("SCCP/201-00000006", "REALCALLERIDNUM is 201") in new stack
    -- Executing [s@macro-outbound-callerid:4] GotoIf("SCCP/201-00000006", "1?normcid") in new stack
    -- Goto (macro-outbound-callerid,s,9)
    -- Executing [s@macro-outbound-callerid:9] Set("SCCP/201-00000006", "USEROUTCID=") in new stack
    -- Executing [s@macro-outbound-callerid:10] Set("SCCP/201-00000006", "EMERGENCYCID=") in new stack
    -- Executing [s@macro-outbound-callerid:11] Set("SCCP/201-00000006", "TRUNKOUTCID=") in new stack
    -- Executing [s@macro-outbound-callerid:12] GotoIf("SCCP/201-00000006", "1?trunkcid") in new stack
    -- Goto (macro-outbound-callerid,s,16)
    -- Executing [s@macro-outbound-callerid:16] GotoIf("SCCP/201-00000006", "1?usercid") in new stack
    -- Goto (macro-outbound-callerid,s,18)
    -- Executing [s@macro-outbound-callerid:18] GotoIf("SCCP/201-00000006", "1?report") in new stack
    -- Goto (macro-outbound-callerid,s,22)
    -- Executing [s@macro-outbound-callerid:22] NoOp("SCCP/201-00000006", "CallerID set to "pl_57" <201>") in new stack
    -- Executing [s@macro-dialout-trunk:15] GotoIf("SCCP/201-00000006", "1?nomax") in new stack
    -- Goto (macro-dialout-trunk,s,17)
    -- Executing [s@macro-dialout-trunk:17] Set("SCCP/201-00000006", "OUTNUM=00552188838618") in new stack
    -- Executing [s@macro-dialout-trunk:18] Set("SCCP/201-00000006", "custom=SIP/2062036594") in new stack
    -- Executing [s@macro-dialout-trunk:19] GotoIf("SCCP/201-00000006", "1?gocall") in new stack
    -- Goto (macro-dialout-trunk,s,22)
    -- Executing [s@macro-dialout-trunk:22] GotoIf("SCCP/201-00000006", "0?customtrunk") in new stack
    -- Executing [s@macro-dialout-trunk:23] Dial("SCCP/201-00000006", "SIP/2062036594/00552188838618,300,") in new stack
  == Using SIP RTP CoS mark 5
    -- Called SIP/2062036594/00552188838618
    -- SEP00137FFD944B: send callInfo of callid 6
    -- SEP00137FFD944B: send callInfo of callid 6
    -- SIP/2062036594-00000003 is making progress passing it to SCCP/201-00000006
    -- SEP00137FFD944B: send callInfo of callid 6
    -- SIP/2062036594-00000003 answered SCCP/201-00000006
    -- SEP00137FFD944B is Onhook
  == SEP00137FFD944B: Ending call 6 on line 201 (Progress)
    -- hangup SCCP/201-00000006: hasPbx yes; ast state: Dialing, sccp state: Progress, blocking: yes, already being hungup: no, hangupcause: 16
    -- SCCP/201-00000006: send ast_queue_hangup
    -- SCCP/201-00000006: send ast_queue_hangup
    -- Executing [h@macro-dialout-trunk:1] Macro("SCCP/201-00000006", "hangupcall") in new stack
    -- Executing [s@macro-hangupcall:1] ResetCDR("SCCP/201-00000006", "w") in new stack
    -- Executing [s@macro-hangupcall:2] NoCDR("SCCP/201-00000006", "") in new stack
    -- Executing [s@macro-hangupcall:3] GotoIf("SCCP/201-00000006", "1?skiprg") in new stack
    -- Goto (macro-hangupcall,s,6)
    -- Executing [s@macro-hangupcall:6] GotoIf("SCCP/201-00000006", "1?skipblkvm") in new stack
    -- Goto (macro-hangupcall,s,9)
    -- Executing [s@macro-hangupcall:9] GotoIf("SCCP/201-00000006", "1?theend") in new stack
    -- Goto (macro-hangupcall,s,11)
    -- Executing [s@macro-hangupcall:11] Hangup("SCCP/201-00000006", "") in new stack
  == Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SCCP/201-00000006' in macro 'hangupcall'
  == Spawn extension (macro-dialout-trunk, h, 1) exited non-zero on 'SCCP/201-00000006'
  == Spawn extension (macro-dialout-trunk, s, 23) exited non-zero on 'SCCP/201-00000006' in macro 'dialout-trunk'
  == Spawn extension (from-internal, 900552188838618, 1) exited non-zero on 'SCCP/201-00000006'
    -- SEP00137FFD944B: Received Feature Change Event: monitor(6)
    -- SEP00137FFD944B: StorageBackend got Feature Change Event: monitor(6)
    -- SEP00137FFD944B: send callInfo of callid 6
As i understand, voipcheap is registered, my DID id working (routing to my voipcheap account), but no incoming.
Outgoing is also wrong.
I'm not being able to find out what is wrong. Is there someome more experienced than me that could help?
Under 8.10, it worked like a charm, now, is working with no charm at all :(
TIA,
Paulo

13
Users / SPA3102 WITH lmce 10.04 - anyone having it working with PSTN?
« on: September 13, 2012, 06:31:55 pm »
Hya,
is there any user using a working PSTN SPA3102 WITH lmce 10.04?
I'm really facing problems, and so, if someone have it working, i would like to talk about.
Any good soul?
BR,
Paulo

14
Users / Radio on 10.04 .m3u?
« on: September 13, 2012, 04:56:26 pm »
Hya,

is file type .m3u supported under the radio scenario?
Tested .pls and works well, but .m3u does not play.
Example: http://www.radioswisspop.ch/live/mp3.m3u
If supported, what is to be done?

BR,

Paulo
   

15
Hya,

after some months out of order, after a move, i reinstalled my system (8.10) which was running before the move.
All worked and today i upgraded the system (apt-get update and apt-get upgrade).
After this upgrade, motion did not restart, and i found it's not starting because of some library change.
The message i'm getting is:

motion: symbol lookup error: /usr/lib/i686/cmov/libavcodec.so.51: undefined symbol: lzo1x_decode
- this was the first error i did note -
Today i did discover that NO video plays under xine.

Anyone got it and was able to solve?

TIA,

Paulo

Pages: [1] 2 3 ... 8