Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - pga57

Pages: [1] 2
1
Users / Last lmce-squeezeslave update give me an error
« on: October 07, 2014, 09:16:20 am »
Hello,

Last lmce-squeezeslave update give me an error:

Code: [Select]
Paramétrage de lmce-squeezeslave (2.0.0.46.14100429520) ...
Ajout de « détournement de /etc/init.d/squeezelite en /usr/pluto/diversions/squeezelite.distrib/etc/init.d/squeezelite par lmce-squeezeslave »
dpkg-divert : erreur : erreur lors de la vérification de « /usr/pluto/diversions/squeezelite.distrib/etc/init.d/squeezelite »: No such file or directory
dpkg : erreur de traitement de lmce-squeezeslave (--configure) :
 le sous-processus script post-installation installé a retourné une erreur de sortie d'état 2
Des erreurs ont été rencontrées pendant l'exécution :
 lmce-squeezeslave
E: Sub-process /usr/bin/dpkg returned an error code (1)


The squeezelite.distrib dir location don't exist.

Greetings
Philippe



2
Installation issues / Intel NUC D54250WY problem
« on: June 05, 2014, 10:56:27 am »
Hi,

I have a problem for using a Intel I5 NUC as MD on LinuxMCE 1204.
It give me a kernel freeze on boot.

I have insert a noapic in the tftpboot default file.
This is a little better but it still ends up with a kernel panic.

I've try to boot this NUC with a usb kubuntu 12.04.3 (i386) and have no problem.

I do not know what else to try.

Any idea ?

Greetings
Philippe



3
Users / Audio over HDMI does not work anymore
« on: December 30, 2013, 10:37:54 am »
Hi,

After doing a upgrade with the lastest pluto-boot-script and mce-diskless-tool (lmce 1004), audio over hdmi does not work anymore on 2 of my MDs (Ion and Ion2 motherboard).
I have try AVWizard to resolve those but have no success.

I also used the asound.conf.pbackup (it specifies the device in addition to the card, ex:plughw:0,3) on the MD but it does not solve anything.

Brief for the moment I do not understand what is happening.
Assistance would be welcome ;-)

Greetings
Philippe









4
I don't find why I have no image with a D-Link DCS-7110 IP camera on Linuxmce 1004.

The camera work perfectly with Zoneminder.

I have create a new template based on Sambuca Advanced_IP_Camera device template.
But no success.
When I start manually this device it give me this logfile:

Code: [Select]

linuxmce@dcerouter:~$ sudo /usr/pluto/bin/Advanced_IP_Camera -d 166
[sudo] password for linuxmce:
Advanced_IP_Camera, v.2.0.0.45.12121426939
Visit www.plutohome.com for source code and license information

10      03/24/13 14:42:41.897           Device: 166 starting.  Connecting to: dcerouter <0xb778d6f0>
10      03/24/13 14:42:41.909           Setting timeout for socket 3 to 20 <0xb778d6f0>
10      03/24/13 14:42:42.006           getConfig() Configuration =  <0xb778d6f0>
10      03/24/13 14:42:42.006           getConfig() parameters.size = 0 <0xb778d6f0>
10      03/24/13 14:42:42.007           getConfig() Children: <0xb778d6f0>
05      03/24/13 14:42:42.007           m_vectEventMethod.size() = 5. Configured EventMethods: <0xb778d6f0>
05      03/24/13 14:42:42.007           m_mapPK_Device_OutputDevice.size() = 0. Configured OutputDevices: <0xb778d6f0>
10      03/24/13 14:42:42.018           Connect OK <0xb778d6f0>
10      03/24/13 14:42:42.018           Requesthandler 0x9aa0a38 (device: 166) runThread now running <0xb6f8bb70>
10      03/24/13 14:42:42.108           Receive string: MESSAGE 103            <0xb6f8bb70>
10      03/24/13 14:42:42.108           Received MESSAGE 103            0x9aa0a38 device: 166 <0xb6f8bb70>
10      03/24/13 14:42:42.108           Received Message type 1 ID 84 from 64 to 166 (device: 166) resp 1 <0xb6f8bb70>
10      03/24/13 14:42:42.108           CMD_Get_Video_Frame: sUrl: http://192.168.80.132:80/video3.mjpg <0xb6f8bb70>



Is there something I have missed ?

Greetings,
Philippe

5
Users / DPMS monitor on Shuttle X50V2 Plus
« on: December 20, 2011, 02:36:48 pm »
Hi,

After hassle to set up my "Shuttle X50V2 Plus" as MD (network adapter problem, screen resolution, etc. ..), it now works (thanks for the information found on the wiki).

But is there a reason why "DPMS monitor" does not work properly, knowing that this MD has an Intel video card (lmce 10.04)?
The screen turns off and comes back right away.

I know that Intel card is currently not recommended but that Shuttle seems perfect for integrating my kitchen! ;-)
And I think it's the only way to turn off the screen when I do not use it.

Greetings,

Philippe



6
Installation issues / Help to resolve my Zwave network problem
« on: November 11, 2011, 10:40:06 am »
Hello all,

I do not know what to do.
No way to set my Zwave network anymore (on 1004).
It only give the possibility to include 1 node and no more.
I have reset the Seluxit viaSENS Homecontroller, the Tricklestar 200ZW_EU_W controleur, etc..
I can include the Tricklestar and 1 peripheral (HomePro ZRP230) but not the others:
4 x Merten Blind control (580699) + Radio shutter push-button (504519)
2 x HomePro ZRP230 (plug-in appliance)
2 x HomePro ZDP230 (plug-in lamp module)

I've try it on a 810 final (on virtualbox) with the same peripherals but no more result (and it worked fine before my new install).

Can anyone give me a solution ?
Is there a problem with zwave on 810 final and 1004 ?

I've try to use a 300ZW-EU-W (instead the Seluxit) but it is no more recognized.

Thank's for your help.

Philippe

7
Installation issues / My upgrade from my old 810 alpha (+ update) to 10.04
« on: November 05, 2011, 12:57:16 pm »
It's been a while since I wanted to take the plunge and I did the last weekend.
I reinstall my system alpha 810 + upgrade to a 1004.
First impression ... the installation script runs without apparent problem.
As against the following configuration asked me a few problems:
- The detection of a nova-t 500 card seems to close all the time and if you answer yes to the detection, the system declares two new tuners each time. Not understanding what was happening, I ended up with at least 5 cards each with 2 tuners!
- The Zwave seems not to work properly. I preferred reinstall everything after a reset of the existing network but I am now blocked to include new devices. I only managed to add one (ZRP230) on my SELUXIS ZW-USB-SERIAL controller + TrickleStar 200ZW-EU.
No way to add more (ZRP230, ZDP230, etc. ???).
Is it related to the 1004?
- Asterisk seemed to work but since the update last Tuesday I can no longer register with my SIP provider.
In addition it seems that the config of a Cisco 7970 phone is not perfect because mine keeps his old number (204) while the new Asterisk installation starts with the numbers 1, 2, 3, etc ...
Cisco can not register with asterisk.

Here is an initial inventory for my case.
I continue to look for what I could do to get it working normally, but for now I stuck ...

Oh yes ... can we ensure not having to reload the router 4-5 times in a row when we change something?
I wonder if here too there is not a malfunction.

Anyway thank you for your work.
There is really changes!

And do not pay too much attention to my English, I use Google;-)

Greetings,

Philippe


8
Users / Door bell question
« on: April 17, 2011, 05:11:19 pm »
Hello,

Is it possible to use such a Duwi duw-064435 as a door bell?

The idea is that when activated, it send a signal to the MDs and to the nearby camera to take a picture?
If this is not possible is there another way (and material) to do the same things ?

Greetings,
Philippe

9
Users / Mythtv don't work on MD's after an update to 0.23
« on: May 27, 2010, 08:55:15 pm »
After an update from 0.22 to 0.23, i have this problem on the MD's.

Code: [Select]

root@moon130:~# apt-get dist-upgrade
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
1 not fully installed or removed.
After this operation, 0B of additional disk space will be used.
Do you want to continue [Y/n]?
Setting up mythtv-database (0.23-0.1) ...
Failed to execute SQL: GRANT ALL PRIVILEGES ON mythconverg.* TO mythtv@localhost IDENTIFIED BY '3zRkyO86'\nAccess denied for user 'root'@'192.168.80.4' to database 'mythconverg' at -e line 8, <> line 1.
dpkg: error processing mythtv-database (--configure):
 subprocess post-installation script returned error exit status 255
Errors were encountered while processing:
 mythtv-database
E: Sub-process /usr/bin/dpkg returned an error code (1)
root@moon130:~#

Is there a solution ?
Remove and reinstall Mythtv on the MD's don't resolve this.

Greetings,
Philippe

10
Installation issues / Component video output
« on: December 16, 2009, 06:29:07 pm »
Hello all,

I have a problem with beta2 (DVD and fresh network install).
I have no possibility to use the component video output (Nvidia 7900).
Does anyone have more succes than me ?

It worked with alpha.
I've try a xorg.conf that I saved from previous install (and modify the orbiter and MD to) but no succes.
Nothing on the screen and the AVWizard setup don't return to the initial screen after a few seconds.

The same MD work with VGA or DVI output (I have no HDMI for the moment)

Philippe

11
Hi,

I need some help to resolve black screens on 2 of my 6 MDs.
One with a nividia 6200LE video card (TV connected) and the other with an onboard 7100 nvidia (VGA connected).
The AVwizard steep worked with no problem.
I have the black screen (with white cursor) before Sarah and the location configuration.

I've look at all the msgs and wiki articles but don't find the solution.
The 2 MDs worked with Lmce 710.

I have regenerate the orbiters, modify the xorg.conf, switch the xorg.conf with another MD that work, rebuild the MD image, add the 810 updates, downgrade the nvidia driver, etc...
I don't find :-(
 
How can I resolve this ?

Thank's !
Philippe


12
Users / 810 alpha2 and motion wrapper
« on: July 31, 2009, 09:40:45 am »
Hello All,

What does a reload router exactly?
I ask this because I have a problem with motion wrapper on LMCE 810 alpha 2.24 and upgrade to 2.26.
I has a PV-149 - 4 port video capture card with 2 analog cameras.
Everything was working perfectly with LMCE 710 for over a year.
Since the update I've done mid-July, motion wrapper stops acquiring data from one camera randomsly (not allways the same).
I only had to reload the router to retrive the missing camera.
This happens about once a day.

How to determine the problem?
I don't understand what information the log gives me:

Code: [Select]
========== NEW LOG SECTION ==========
1 07/30/09 07:18:46 45 (spawning-device) Starting... 1
1 07/30/09 07:18:46 45 (spawning-device) Found /usr/pluto/bin/Motion_Wrapper
05 07/30/09 7:18:47.070 Connect() failed, Error Code 111 (Connection refused)) <0xb79b26c0>
05 07/30/09 7:18:48.071 Connect() failed, Error Code 111 (Connection refused)) <0xb79b26c0>
05 07/30/09 7:18:49.070 Connect() failed, Error Code 111 (Connection refused)) <0xb79b26c0>
05 07/30/09 7:18:52.179 Creating child 46 <0xb79b26c0>
05 07/30/09 7:18:52.179 Note: Device manager has attached a device of type 66 that this has no custom event handler for.  It will not fire events. <0xb79b26c0>
05 07/30/09 7:18:52.179 Note: Device manager has attached a device of type 66 that this has no custom handler for.  This is normal for IR. <0xb79b26c0>
05 07/30/09 7:18:52.179 Creating child 47 <0xb79b26c0>
05 07/30/09 7:18:52.179 Note: Device manager has attached a device of type 66 that this has no custom event handler for.  It will not fire events. <0xb79b26c0>
05 07/30/09 7:18:52.179 Note: Device manager has attached a device of type 66 that this has no custom handler for.  This is normal for IR. <0xb79b26c0>
05 07/30/09 8:24:13.351 Going to rotate logs... <0xb71b0b90>
05 07/30/09 8:41:33.592 Going to rotate logs... <0xb71b0b90>
05 07/31/09 8:03:17.283 Going to rotate logs... <0xb71b0b90>
05 07/31/09 8:10:29.777 Going to rotate logs... <0xb71b0b90>
05 07/31/09 8:42:50.515 Got a reload command from 0  <0xb71b0b90>
05 07/31/09 8:42:50.854 void ClientSocket::Disconnect() on this socket: 0x8083fa0 (m_Socket: 7) <0xb79b26c0>
Return code: 2
2 07/31/09 08:42:50 45 (spawning-device) Device requests restart... count=1/50 dev=45
Fri Jul 31 08:42:50 CEST 2009 Restart
========== NEW LOG SECTION ==========
1 07/31/09 08:42:58 45 (spawning-device) Starting... 1
1 07/31/09 08:42:58 45 (spawning-device) Found /usr/pluto/bin/Motion_Wrapper
05 07/31/09 8:42:59.904 Connect() failed, Error Code 111 (Connection refused)) <0xb79a36c0>
05 07/31/09 8:43:00.904 Connect() failed, Error Code 111 (Connection refused)) <0xb79a36c0>
05 07/31/09 8:43:01.904 Connect() failed, Error Code 111 (Connection refused)) <0xb79a36c0>
05 07/31/09 8:43:03.999 Creating child 46 <0xb79a36c0>
05 07/31/09 8:43:03.999 Note: Device manager has attached a device of type 66 that this has no custom event handler for.  It will not fire events. <0xb79a36c0>
05 07/31/09 8:43:04.000 Note: Device manager has attached a device of type 66 that this has no custom handler for.  This is normal for IR. <0xb79a36c0>
05 07/31/09 8:43:04.000 Creating child 47 <0xb79a36c0>
05 07/31/09 8:43:04.000 Note: Device manager has attached a device of type 66 that this has no custom event handler for.  It will not fire events. <0xb79a36c0>
05 07/31/09 8:43:04.000 Note: Device manager has attached a device of type 66 that this has no custom handler for.  This is normal for IR. <0xb79a36c0>

Philippe

13
Users / Cisco 7970 and Asterisk config help
« on: March 21, 2009, 03:52:01 pm »
Hello All,

I try to use a cisco 7970 on LinuxMCE 7.10.
For the moment, I have the hability to receice external calls but it is not possible to dial external number.
I've look at a lot of config files but it is really hard for me to determine the wrong or missing parameters.

When I look on the asterisk log, I have some errors:

[Mar 21 15:25:15] VERBOSE[7949] logger.c:     -- SCCP: Accepted connection from 192.168.80.227
[Mar 21 15:25:15] VERBOSE[7949] logger.c:     -- SCCP: Using ip 192.168.80.1
[Mar 21 15:25:16] WARNING[7909] chan_sip.c: Bad request protocol Packet
[Mar 21 15:25:17] VERBOSE[7949] logger.c:     -- SCCP: Alarm Message: Severity: Informational (2), 14: Nom=SEP001BD4A0DE18 Image= SCCP70.8-2-2SR2S Dernier=CM-fermeture-TCP [0/0]
[Mar 21 15:25:18] WARNING[7909] chan_sip.c: Bad request protocol Packet
[Mar 21 15:25:18] WARNING[7909] chan_sip.c: Bad request protocol Packet
[Mar 21 15:25:19] VERBOSE[7949] logger.c:     -- SEP001BD4A0DE18: unregister request sent
[Mar 21 15:25:20] WARNING[7909] chan_sip.c: Bad request protocol Packet
[Mar 21 15:25:20] WARNING[7909] chan_sip.c: Bad request protocol Packet
[Mar 21 15:25:21] WARNING[7909] chan_sip.c: Bad request protocol Packet
[Mar 21 15:25:21] WARNING[7909] chan_sip.c: Bad request protocol Packet
[Mar 21 15:25:22] WARNING[7909] chan_sip.c: Bad request protocol Packet

Can those explain the problem I have ?
How can I correct them ?

Thank's for your help.
Philippe




14
Users / WebDT 366 encryption
« on: January 10, 2009, 11:21:00 am »
Hello,

I'm playing with my WebDT 366 (group by Europe) I've received yesterday.
Without wifi encrytion, it work well.
But I have no sucess with 128bit WEP encryption.
I've test a lot of hexdecimal key format but have no result (AA:BB:CC:..., AABBCC..., aa:bb:cc:..., aabbcc..., aa-bb-cc...,AA-BB-CC..., etc...).
I suppose something is wrong but don't find the solution.
Do you have better result ?

Philippe

15
Users / GA-73PVM-SH2 as diskless MD
« on: May 30, 2008, 11:29:45 am »
Hi,

How can I use a GA-73PVM-SH2 motherboard as a diskless MD ?
When I boot for the first time, I wait after diskless_setup.sh for a few minutes and the PC reboot.
It allways create a new ID with a news IP adresse for the diskless_setup and reboot.

How can I find what it's append and resolve this issue ?


Pages: [1] 2