Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - gadget

Pages: [1] 2
Users / Dianemo S 12.04 Amplifier and Projector input configuration
« on: February 17, 2013, 12:52:29 am »
When playing a video My amplifier and projector both power On but don't select the correct inputs on my core.
I have the following in the device data field on the core/hybrid page in web admin.

VID_20=62,IN_DVI; SND_20=56,IN_HDMI2

Users / (Solved) Dianemo S (12.04) GC100 serial port won't save
« on: February 01, 2013, 05:16:39 am »
I have an Infocus Projector connected to the serial port of my GC100. In web admin I can select the serial port that the GC100 is connected to but after a reboot/reload router I have to set it again. This causes the projector not to register unless i fix it before the 50 attempts to register.

It used to work on 11.10.

Users / Dianemo S UPnP
« on: July 07, 2012, 02:53:36 am »
I have bought a WD LiveTV to play with a UPnP device but cannot get to select it when playing movies. When I select movies from an orbiter I don't get the option of UPnP it just goes straight to movies.
I have checked that there is a UPnP plugin device on dcerouter and it does exist.

When I browse the network directly from the WD LiveTV there are 2 UPnP media servers available with no media. mythtv and logitech. Can either of these be configured to share via UPnP the movies on the NC or do I need to use another UPnP server.


Users / Dianemo S Viewing Pictures/Slideshow
« on: July 04, 2012, 05:35:21 am »
Using the new Dianemo skin there is no longer an option to view pictures. Is there any way to view pictures either in pluto file structure or from a USB stick preferably.


Installation issues / Dianemo S Media files Sync
« on: June 13, 2012, 02:14:00 pm »

I can't seem to get to the video/audio files from either pluto or dianemo web admin to display. All of the data is on a linux NAS and that isn't showing under media files sync but the audio/movies are definitely there when I play them from the NC or an MM.


Developers / IDE under Linux on development system
« on: May 09, 2012, 09:47:22 am »

I have built myself a development 10.04 system and download the source to my home folder. I have also installed Eclispse IDE but when I point it to one of the folders in the src tree I can only load 1 file at a time and not the whole project. If i map this share the source folder and open the project in Visual Studio there is a VC++ config file which correctly loads all of the files as a complete project.

I don't want to have to use Visual Studio so would like to know if there is a way I can do it in Linux. Doesn't have to be Eclipse IDE.


Installation issues / [Resolved] Latest snapshot fails after AVWizard
« on: March 20, 2012, 02:14:57 am »
I am setting up a test core with the latest snapshot of 10.04 and it stops after the AVWizard with the following.
snapshot version 1004-201203181915

Code: [Select]
/etc/rc2.d/S99Linuxmce: line 153: [: : integer expression expected
/etc/rc2.d/S99Linuxmce: line 177: [: : integer expression expected
.....starts other services
/etc/rc2.d/S99Linuxmce: line 212: [: : integer expression expected
Starting LinuxMCE Launch Manager ... ok

AVwizard completes fine but no Sarah?

Users / DCS5300 IP Camera has no log
« on: November 06, 2010, 10:31:21 am »
I have installed a DCS5300 IP Camera using the DCS5300G template but cannot get an image to display.  I have checked for the log after a reboot and cannot find one using either the web admin or in /var/log/pluto/ . I expected something for 85_?? as that is the device number it has been given. Any pointers where else to look for clues as to why it won't work would be appreciated.


Developers / help with building the windows orbiter from source
« on: May 13, 2010, 03:06:33 pm »
I have finally managed to get a development environment up using VS2010 and have successfully built the windows Orbiter in the base Orbiter folder and Win32_Pocketfrog version.

Both of them start the orbiter but generate an exception in main.cpp at the same point.

Code: [Select]
//It's safe now to use the logger
LoggerWrapper::GetInstance()->Write(LV_STATUS, "Device: %d starting.  Connecting to: %s",CmdLineParams.PK_Device,

I am new to c++ so some pointers at where to look would be appreciated.


Installation issues / Mythtv with DVB-T card on MD not working
« on: May 05, 2010, 01:29:08 pm »
Hi All,

I am unable to get MYTHTV to play from a card that is installed on and MD. This used to work but i have rebuilt my core recently. I can add the card in myth setup but when i try to play TV it always compains that the inputs are all busy.

Just wondering if anyone has experienced this.


Users / Unable to play videos stored on core or NAS from MD
« on: April 16, 2010, 02:54:24 pm »

since the latest update i am now unable to play a video on any of my MD's. When i press play the main menu just comes up and i dont get any messages. Core works OK. Is there a log that might show me an error message or is anyone else experiencing the same issue.


Installation issues / cant create an MD after latest update
« on: April 13, 2010, 05:01:00 pm »
Just wondering if anyone else was having problems creating MD's at the moment. After Diskless_setup the system reboots and i get
Code: [Select]
could not find kernel image moon#/vmlinuz
I have only tried on 1 PC but it used to work as an MD before i did a complete rebuild of core recently.


Installation issues / New Foxtel IQ2 template issue
« on: April 12, 2010, 03:40:33 pm »
I have created a template for the Foxtel IQ2 cable box and used the USB-UIRT to learn all the codes. The device shows up as a device to control under media and will turn the Foxtel box on when i select. However most of the buttons on the "remote" ie numbers and channel up/down down send anything. I can go to advanced section in the list and all of the codes work fine there.


Installation issues / myth gone after dist-upgrade
« on: January 31, 2010, 02:17:48 am »
During a dist-upgrade today all of the mythtv packages were removed and trying to add them back manually i am getting some errors.

Code: [Select]
apt-get install mythtv-backend

The following packages have unmet dependencies:
  mythtv-backend: Depends: mythtv-common (= 2:0.22.0-fixes23323-0ubuntu0) but 2:0.23.0~trunk-23168-0ubuntu0 is to be installed
                  Depends: mythtv-transcode-utils (= 2:0.22.0-fixes23323-0ubuntu0) but it is not going to be installed
E: Broken packages

How do i force it lo look for .22 as mythtv-common is already installed and is at version .22


Developers / Help with updating windows orbiter to VS2008
« on: October 16, 2009, 11:28:06 pm »
I have managed to get the orbiter to partly compile in VS2008 but am now getting the following error.

Code: [Select]
_CE_ACTIVEX was not defined because this Windows CE SDK does not have DCOM.
 _CE_ACTIVEX could be caused to be defined by defining _CE_ALLOW_SINGLE_THREADED_OBJECTS_IN_MTA, but it is recommended that this be done only for single-threaded apps.
_ATL_NO_HOSTING was defined because _CE_ACTIVEX was not defined.
c:\pluto\trunk\src\orbiter\cenet_smartphone\LRMenu.h(147) : error C2143: syntax error : missing ';' before '*'

I have also updated from STLport4.5.3 to STLport5.2.1

I am new to C++ and suspect that something with the STport upgrade requires a compiler flag to solve the issue.

If i can get this to finish compiling I believe i should be able to target the newer mobile platforms as well.


Pages: [1] 2