Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - mitsus

Pages: [1]
1
Installation issues / Windows CE PDA Orbiter installation
« on: November 08, 2007, 12:58:49 pm »
Hi,
iwould want to install Puto Orbiter for Windows CE PDA. I don't find nothing into Wiki about this.
I've connect my PDA with Blutooth to my Kubuntu workstation and i've tried to upload some files (Orbiter.CAB, Orbiter_CE.exe, ecc) into my PDA using wrongly the command line:

#/usr/pluto/bin/SmartphoneInstall.sh 00:12:37:3C:77:21 OrbiterCE_SDL.exe

I'm able to trannsfer these files into my PDA, and i'm able to install them, but when i try to lauch application i see only black screen and it lock the keys.

I've added into linuxMCE admin interface this type of orbiter. See below the screenshot



Can someone help me please?

Thank a lot.

2
Installation issues / WinTV-PVR 500 MCE Kit
« on: November 07, 2007, 03:08:25 pm »
Hi boys,
i've currently installed a Hauppauge WinTV-PVR 500 MCE Kit on my Linux MCE. I've problem to install     Infrared Receiver. On Linux MCE Admin web page i've selected Devices->Media directors->Infrared remote controls you will use: Windows XP MC Remote and on the section     Infrared Receivers: mce_usb2, bur when i reload router on screen i see that there are problems on a pheripheral     Infrared Receivers.
Below the screenshot oh the LinuxMCE Admin web site MediaDirectors section.


There is another procedure to install this Infrared Receiver?

Please help me!!

Thank a lot

3
Users / Windows Mobile 2005 SmathPhone problem
« on: November 05, 2007, 06:24:17 pm »
Hi,
i've install Orbiter.CAB on Samsung i600 with Windows Mobile 2005 for smathphone. I'm able to install it on my phone, but when i launh the "pluto application" i see only a black screen and my phone dead.
Only Nokia 770 is supported about smathphone? Are my installation steps ok?

Thank a lot.

4
Users / VoIp rpoble using another provider
« on: October 30, 2007, 12:16:11 pm »
Hi all,
i've a problem when i try to do and receive a call via an external sip provider NOVERCA.
I'm able to send a call to Linux MCE softPhone (it ringing), but i the RTP flow don't work.
Below i post my asterisk log
Code: [Select]
<-- SIP read from 192.168.80.1:5061:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 192.168.80.1:5060;branch=z9hG4bK37743f71;rport=5060
From: "0039066114" <sip:0039066114@192.168.80.1>;tag=as696bf54c
To: <sip:2222@192.168.80.1:5061>;tag=1954321300
Call-ID: 5f2980e529469ad30927cca1661ff15e@192.168.80.1
CSeq: 102 INVITE
Contact: <sip:2222@192.168.80.1:5061>
Allow: INVITE, ACK, OPTIONS, CANCEL, BYE, SUBSCRIBE, NOTIFY, MESSAGE, INFO
Content-Type: application/sdp
Content-Length:   213

v=0
o=root 123456 654321 IN IP4 192.168.1.10
s=A conversation
c=IN IP4 192.168.1.10
t=0 0
m=audio 7078 RTP/AVP 0 8 101
b=AS:-1
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000

--- (10 headers 10 lines)---
Found RTP audio format 0
Found RTP audio format 8
Found RTP audio format 101
Peer audio RTP is at port 192.168.1.10:7078
Found description format PCMU
Found description format PCMA
Found description format telephone-event
Capabilities: us - 0x10c (ulaw|alaw|g729), peer - audio=0xc (ulaw|alaw)/video=0x0 (nothing), combined - 0xc (ulaw|alaw)
Non-codec capabilities: us - 0x1 (telephone-event), peer - 0x1 (telephone-event), combined - 0x1 (telephone-event)
list_route: hop: <sip:2222@192.168.80.1:5061>
set_destination: Parsing <sip:2222@192.168.80.1:5061> for address/port to send to
set_destination: set destination to 192.168.80.1, port 5061
Transmitting (NAT) to 192.168.80.1:5061:
ACK sip:2222@192.168.80.1:5061 SIP/2.0
Via: SIP/2.0/UDP 192.168.80.1:5060;branch=z9hG4bK2566d099;rport
From: "0039066114" <sip:0039066114@192.168.80.1>;tag=as696bf54c
To: <sip:2222@192.168.80.1:5061>;tag=1954321300
Contact: <sip:0039066114@192.168.80.1>
Call-ID: 5f2980e529469ad30927cca1661ff15e@192.168.80.1
CSeq: 102 ACK
User-Agent: Asterisk PBX
Max-Forwards: 70
Content-Length: 0


---
    -- SIP/2222-6cbd answered SIP/linux_mce1-c5d8
We're at 192.168.1.10 port 17796
Adding codec 0x4 (ulaw) to SDP
Adding codec 0x8 (alaw) to SDP
Adding codec 0x100 (g729) to SDP
Adding non-codec 0x1 (telephone-event) to SDP
Reliably Transmitting (NAT) to 213.217.147.203:5060:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 213.217.147.203:5060;branch=z9hG4bKa6d43d11db3e00edec5f0f29;received=213.217.147.203;rport=5060
Via: SIP/2.0/UDP  213.217.147.248:5060;branch=z9hG4bKE326F3
Record-Route: <sip:213.217.147.203;lr>
From: <sip:0039066114@213.217.147.248>;tag=3DCD25E0-23AF
To: <sip:00390661244130@213.217.147.203>;tag=as51aff481
Call-ID: 6F5DEE67-67A011D5-834DB747-8AF6A98@213.217.147.248
CSeq: 101 INVITE
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
Contact: <sip:2222@192.168.1.10>
Content-Type: application/sdp
Content-Length: 285

v=0
o=root 7297 7298 IN IP4 192.168.1.10
s=session
c=IN IP4 192.168.1.10
t=0 0
m=audio 17796 RTP/AVP 0 8 18 101
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=silenceSupp:off - - - -

--- (8 headers 0 lines)---
dcerouter*CLI>
<-- SIP read from 192.168.80.1:5061:
SIP/2.0 481 Subcription Does Not Exist
Via: SIP/2.0/UDP 192.168.80.1:5060;branch=z9hG4bK6e0a61cf;rport=5060
From: "asterisk" <sip:asterisk@192.168.80.1>;tag=as55eec798
To: <sip:2222@192.168.80.1:5061>;tag=2040230086
Call-ID: 067874834dc3ee461571a4be3daedf7f@192.168.80.1
CSeq: 102 NOTIFY
Allow: INVITE, ACK, OPTIONS, CANCEL, BYE, SUBSCRIBE, NOTIFY, MESSAGE, INFO
Content-Length: 0


--- (8 headers 0 lines)---
    -- Got SIP response 481 "Subcription Does Not Exist" back from 192.168.80.1
Destroying call '067874834dc3ee461571a4be3daedf7f@192.168.80.1'
Destroying call '6101a3cc58f8e4ba52dc48de6b06e759@192.168.80.1'
Destroying call '1348218129@192.168.80.1'

Tell me if i must post others information, about for example my sip configuration files.

Thank you

5
Installation issues / Keyboard/Mouse don't work
« on: October 24, 2007, 06:44:11 pm »
Hi all,
After an installation of Linux MCE with DHCP server "ON", when i lauch it, keyboard and mouse don't work, in sense that i don't able to click nothing on graphical interface, but i'm able to use its on Kubuntu system and i use well Linux MCE HTTP Admin interface.

This problem is on when i've reinstall Linux MCE using DHCP server build in. While on past installation without dhcp server all work fine!

Someone can halp me to solve this problem?

6
Users / Pan/Tilt/Zoom setting for Panasonic IP camera
« on: October 23, 2007, 11:13:56 am »
Hi all,
i've a strange problem when i try to use a panasonic ip camera with Pan/Tilt function (bl-c 131 is the model). Well i'm able to configure it basically. See first snapshot.. Next i clik on "View" button and go to this page . Here, i'm able to see "Commands" with "Pan/Tilt/Zoom" infos. I edit it and insert into the text boxes the url of my pan/Tilt command API. Well. I'm able to see image from camera with linux MCE but Pan/Tilt command don't works.

Thank a lot


7
Installation issues / NVIDIA cards question
« on: October 18, 2007, 01:04:12 pm »
HI all,
is there someone that is able to fix the NVIDIA cards problems?
I see many questions from many users, but i don't understand if all NVIDIA cards are ables to run LinuxMCE with UI2 !!
I've a NVIDIA Quadro FX 3450/4000 SDI graphic card. I've try http://wiki.linuxmce.org/index.php/Display_Drivers but it don't work!! Never! I try other steps to install NVIDIA drivers and i post all my tests in this forum!
I want to solve these question because it is primary for me. I don't want UI1 interface, but UI2. I've buy an NVIDIA cards because LinuxMCE documentation wrote << Unfortunately very few video card manufacturers have the necessary composite extensions in their Linux drivers. At this moment the only video hardware we have confirmed UI2 works with are the nVidia 6xxx and 7xxx series; preferably a 7xxx with at least 128MB RAM.>>

I update my experience.

Thank a lot

Pages: [1]