Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - brononius

Pages: [1] 2 3 ... 26
1
Installation issues / Re: Installing 12.04
« on: December 14, 2014, 12:53:59 pm »
Thanks for the reply!

Installed earlier version already. The 12.04 doesn't recognize my network cards... Grrrrr.
Okay, i'll give it another try.


2
Installation issues / Installing 12.04
« on: December 13, 2014, 05:59:18 pm »
Hey,

I'm trying to install the 12.04 with the 'oh crap the dvd did not work for me' way.
      http://wiki.linuxmce.org/index.php/Installing_1204

But once i've downloaded the script, i encounter issues to download the soft:

Quote
root@corius:~# ./mce-install.sh
za dec 13 17:56:46 CET 2014 - Logging initiatilized to /var/log/LinuxMCE_Setup.log
za dec 13 17:56:46 CET 2014 - Performing an update and an upgrade to all components
Pakketlijsten worden ingelezen...
Boom van vereisten wordt opgebouwd...
De status informatie wordt gelezen...
0 pakketten opgewaardeerd, 0 pakketten nieuw geïnstalleerd, 0 te verwijderen en 0 niet opgewaardeerd.
za dec 13 17:56:57 CET 2014 - Synchronizing time with an online server
13 Dec 17:57:03 ntpdate[8790]: adjust time server 91.189.94.4 offset 0.060955 sec
za dec 13 17:57:03 CET 2014 - APT preference on number of retries already set 
za dec 13 17:57:03 CET 2014 - APT preference on number of retries set
za dec 13 17:57:03 CET 2014 - Installing necessary prep packages
Pakketlijsten worden ingelezen...
Boom van vereisten wordt opgebouwd...
De status informatie wordt gelezen...
debconf-utils is reeds de nieuwste versie.
dpkg-dev is reeds de nieuwste versie.
makedev is reeds de nieuwste versie.
0 pakketten opgewaardeerd, 0 pakketten nieuw geïnstalleerd, 0 te verwijderen en 0 niet opgewaardeerd.
za dec 13 17:57:03 CET 2014 - Creating necessary package files
dpkg-scanpackages: info: Wrote 0 entries to output Packages file.
za dec 13 17:57:04 CET 2014 - Configuring sources.list for MCE install
sed: expressie #1, teken 8: onbekende opdracht: 'u'
za dec 13 17:57:04 CET 2014 - Repository file:/usr/pluto/deb-cache/ubuntu-utopic-i386 ./ already active, moved to top
OK
W: Ophalen van http://deb.linuxmce.org/ubuntu/dists/utopic/main/binary-i386/Packages is mislukt  404  Not Found

E: Sommige indexbestanden konden niet worden opgehaald. Deze zijn genegeerd, of oude versies zijn gebruikt.
An error (Exit code 100) occured during the last action
apt-get update


Any clue?

3
Users / Re: 710,810,1004 or what?
« on: October 20, 2014, 03:26:58 pm »
I need to extend my home automation system. And at the same time, I'm thinking to reassign hardware addresses and ...

So I think it's also time to start upgrading my server. I'm still on 8.  :-[
Just was looking what the latest version is, and noticed that you guys are already on 1404.
Is this already 'usable'?





4
Installation issues / Re: Qorbiter creates a lot of Generic Proxy Orbiter?
« on: September 22, 2014, 06:11:16 pm »
I've done this morning an update. So I should be pretty up-to-date. ;-)

Damned, maybe time that I invest some time to upgrade to 12?

5
Installation issues / Qorbiter creates a lot of Generic Proxy Orbiter?
« on: September 22, 2014, 05:58:09 pm »
Finally found the time to get my phones (android) back up with LinuxMCE.

When I add an qorbiter following http://wiki.linuxmce.org/index.php/Android_Orbiter, my linuxMCE goes nuts (I think). In no time, I've got about 20 'Generic Proxy Orbiters'. Not sure why he does that, or if it's normal. And when I try to connect with my phone, I keeps on saying 'please wait'.

I've got also the feeling that when I do a regen or full regen on the server, it's done in about 1 sec. So I don't think that it's doing a lot.


In the logs, i've got:


Quote from: more /var/log/pluto/668_LaunchProxy_Orbiter.sh.log
== ATTEMPT FRESH START ==
1   09/22/14 17:52:19   /usr/pluto/bin/Spawn_Device.sh 668 (spawning-device)   7678 Dev: 668; Already Running list: 15,16,18,19,29,30,180,385,398,400,402,404,587,606,607,608,611,612,659,660,66
1,662,663,664,665,666,667,
== FRESH START ==
1   09/22/14 17:52:19   /usr/pluto/bin/Spawn_Device.sh 668 (spawning-device)   device: 668 ip: localhost cmd_line: LaunchProxy_Orbiter.sh
0   09/22/14 17:52:19   668 (spawning-device)   Entering 668
========== NEW LOG SECTION ==========
1   09/22/14 17:52:19   668 (spawning-device)   Starting... 1
1   09/22/14 17:52:19   668 (spawning-device)   Found /usr/pluto/bin/LaunchProxy_Orbiter.sh
05   09/22/14 17:52:19.934      Connection for client socket reported NEED RELOAD IP=::ffff:127.0.0.1, device 668 last error 2 <0xb77d6740>
05   09/22/14 17:52:19.938      void ClientSocket::Disconnect() on this socket: 0x98c9d88 (m_Socket: 6) <0xb77d6740>
Return code: 2
2   09/22/14 17:52:19   668 (spawning-device)   Device requests restart... count=1/50 dev=668
Mon Sep 22 17:52:19 CEST 2014 Restart
========== NEW LOG SECTION ==========
1   09/22/14 17:52:27   668 (spawning-device)   Starting... 1
1   09/22/14 17:52:27   668 (spawning-device)   Found /usr/pluto/bin/LaunchProxy_Orbiter.sh
05   09/22/14 17:52:28.056      Connection for client socket reported NEED RELOAD IP=::ffff:127.0.0.1, device 668 last error 2 <0xb76e0740>
05   09/22/14 17:52:28.060      void ClientSocket::Disconnect() on this socket: 0x866ad88 (m_Socket: 6) <0xb76e0740>
Return code: 2
2   09/22/14 17:52:28   668 (spawning-device)   Device requests restart... count=1/50 dev=668
Mon Sep 22 17:52:28 CEST 2014 Restart
.........



And help is much appreciated!

6
Users / What Android app to use
« on: July 29, 2014, 09:13:11 am »
Hey,

Before, I used an android app to control my home. But I can't seem to find this app anymore.  ???

The only app I can find is the qorbiter. But honestly, this doesn't have a good GUI for a smartphone (LG Nexus 5). I tried to change the skins, but it keeps returning to the 'red-like' skin. fe When I want to select a room, I need to scroll and scroll and scroll, and I see a lot of ID of devices I prefer not to see. The floor layout is so small it's not usefull.

So any hints where I can find the old app, or if I can change a setting in order to have a more userfriendly GUI with the qorbiter?

7
Users / Re: Samba issue
« on: June 27, 2014, 12:27:19 pm »
you've updated the samba server

I can't recall that I've done it specially for something. Just some apt-get updates, and I'm playing around with backuppc.

For me, it's working now, and I don't have so many users, so it's a quick solution.
But if I can do/test anything, let me know...

8
Users / Re: Samba issue
« on: June 27, 2014, 10:02:35 am »
Not sure if this is the solution, but it seems to help to run 'smbpasswd -a'

Quote
smbpasswd -a pluto_brientje
   password:
   Retype new SMB password:
Added user pluto_brientje.



Afterwards, i'm able to login with the samba clients.

9
Users / Re: Samba issue
« on: June 27, 2014, 09:13:32 am »
After raising the log level, this is a bit more information:

Quote from: more log.clientPC
[2014/06/27 09:06:42,  3] smbd/map_username.c:188(map_username)
  Mapped user Brientje to pluto_brientje
[2014/06/27 09:06:42,  3] auth/auth.c:222(check_ntlm_password)
  check_ntlm_password:  Checking password for unmapped user [clientPC]\[Brientje]@[clientPC] with the new password interface
[2014/06/27 09:06:42,  3] auth/auth.c:225(check_ntlm_password)
  check_ntlm_password:  mapped user is: [CORIUS]\[pluto_brientje]@[clientPC]
[2014/06/27 09:06:42,  3] smbd/sec_ctx.c:210(push_sec_ctx)
  push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2014/06/27 09:06:42,  3] smbd/uid.c:428(push_conn_ctx)
  push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2014/06/27 09:06:42,  3] smbd/sec_ctx.c:310(set_sec_ctx)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2014/06/27 09:06:42,  3] smbd/sec_ctx.c:418(pop_sec_ctx)
  pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2014/06/27 09:06:42,  3] auth/auth_sam.c:282(check_sam_security)
  check_sam_security: Couldn't find user 'pluto_brientje' in passdb.
[2014/06/27 09:06:42,  2] auth/auth.c:320(check_ntlm_password)
  check_ntlm_password:  Authentication for user [Brientje] -> [pluto_brientje] FAILED with error NT_STATUS_NO_SUCH_USER
[2014/06/27 09:06:42,  3] smbd/error.c:60(error_packet_set)
  error packet at smbd/sesssetup.c(122) cmd=115 (SMBsesssetupX) NT_STATUS_LOGON_FAILURE
[2014/06/27 09:06:42,  3] smbd/process.c:1459(process_smb)
  Transaction 3 of length 142 (0 toread)
[2014/06/27 09:06:42,  3] smbd/process.c:1273(switch_message)
  switch message SMBsesssetupX (pid 20548) conn 0x0
[2014/06/27 09:06:42,  3] smbd/sec_ctx.c:310(set_sec_ctx)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2014/06/27 09:06:42,  3] smbd/sesssetup.c:1404(reply_sesssetup_and_X)
  wct=12 flg2=0xc807
[2014/06/27 09:06:42,  2] smbd/sesssetup.c:1360(setup_new_vc_session)
  setup_new_vc_session: New VC == 0, if NT4.x compatible we would close all old resources.
[2014/06/27 09:06:42,  3] smbd/sesssetup.c:1160(reply_sesssetup_and_X_spnego)
  Doing spnego session setup
[2014/06/27 09:06:42,  3] smbd/sesssetup.c:1202(reply_sesssetup_and_X_spnego)
  NativeOS=[] NativeLanMan=[] PrimaryDomain=[]
[2014/06/27 09:06:42,  3] smbd/sesssetup.c:786(reply_spnego_negotiate)
  reply_spnego_negotiate: Got secblob of size 40
[2014/06/27 09:06:42,  3] libsmb/ntlmssp.c:62(debug_ntlmssp_flags)
  Got NTLMSSP neg_flags=0xe2088297
[2014/06/27 09:06:42,  3] smbd/process.c:1459(process_smb)
  Transaction 4 of length 474 (0 toread)
[2014/06/27 09:06:42,  3] smbd/process.c:1273(switch_message)
  switch message SMBsesssetupX (pid 20548) conn 0x0
[2014/06/27 09:06:42,  3] smbd/sec_ctx.c:310(set_sec_ctx)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2014/06/27 09:06:42,  3] smbd/sesssetup.c:1404(reply_sesssetup_and_X)
  wct=12 flg2=0xc807
[2014/06/27 09:06:42,  2] smbd/sesssetup.c:1360(setup_new_vc_session)
  setup_new_vc_session: New VC == 0, if NT4.x compatible we would close all old resources.
[2014/06/27 09:06:42,  3] smbd/sesssetup.c:1160(reply_sesssetup_and_X_spnego)
  Doing spnego session setup
[2014/06/27 09:06:42,  3] smbd/sesssetup.c:1202(reply_sesssetup_and_X_spnego)
  NativeOS=[] NativeLanMan=[] PrimaryDomain=[]
[2014/06/27 09:06:42,  3] libsmb/ntlmssp.c:745(ntlmssp_server_auth)
  Got user=[Brientje] domain=[clientPC] workstation=[clientPC] len1=24 len2=222
[2014/06/27 09:06:42,  3] smbd/map_username.c:188(map_username)
  Mapped user Brientje to pluto_brientje
[2014/06/27 09:06:42,  3] auth/auth.c:222(check_ntlm_password)
  check_ntlm_password:  Checking password for unmapped user [clientPC]\[Brientje]@[clientPC] with the new password interface
[2014/06/27 09:06:42,  3] auth/auth.c:225(check_ntlm_password)
  check_ntlm_password:  mapped user is: [CORIUS]\[pluto_brientje]@[clientPC]
[2014/06/27 09:06:42,  3] smbd/sec_ctx.c:210(push_sec_ctx)
  push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2014/06/27 09:06:42,  3] smbd/uid.c:428(push_conn_ctx)
  push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2014/06/27 09:06:42,  3] smbd/sec_ctx.c:310(set_sec_ctx)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2014/06/27 09:06:42,  3] smbd/sec_ctx.c:418(pop_sec_ctx)
  pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2014/06/27 09:06:42,  3] auth/auth_sam.c:282(check_sam_security)
  check_sam_security: Couldn't find user 'pluto_brientje' in passdb.
[2014/06/27 09:06:42,  2] auth/auth.c:320(check_ntlm_password)
  check_ntlm_password:  Authentication for user [Brientje] -> [pluto_brientje] FAILED with error NT_STATUS_NO_SUCH_USER
[2014/06/27 09:06:42,  3] smbd/error.c:60(error_packet_set)
  error packet at smbd/sesssetup.c(122) cmd=115 (SMBsesssetupX) NT_STATUS_LOGON_FAILURE
[2014/06/27 09:06:48,  3] smbd/process.c:1459(process_smb)
  Transaction 5 of length 142 (0 toread)
[2014/06/27 09:06:48,  3] smbd/process.c:1273(switch_message)
  switch message SMBsesssetupX (pid 20548) conn 0x0
[2014/06/27 09:06:48,  3] smbd/sec_ctx.c:310(set_sec_ctx)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2014/06/27 09:06:48,  3] smbd/sesssetup.c:1404(reply_sesssetup_and_X)
  wct=12 flg2=0xc807
[2014/06/27 09:06:48,  2] smbd/sesssetup.c:1360(setup_new_vc_session)
  setup_new_vc_session: New VC == 0, if NT4.x compatible we would close all old resources.
[2014/06/27 09:06:48,  3] smbd/sesssetup.c:1160(reply_sesssetup_and_X_spnego)
  Doing spnego session setup
[2014/06/27 09:06:48,  3] smbd/sesssetup.c:1202(reply_sesssetup_and_X_spnego)
  NativeOS=[] NativeLanMan=[] PrimaryDomain=[]
[2014/06/27 09:06:48,  3] smbd/sesssetup.c:786(reply_spnego_negotiate)
  reply_spnego_negotiate: Got secblob of size 40
[2014/06/27 09:06:48,  3] libsmb/ntlmssp.c:62(debug_ntlmssp_flags)
  Got NTLMSSP neg_flags=0xe2088297
[2014/06/27 09:06:48,  3] smbd/process.c:1459(process_smb)
  Transaction 6 of length 474 (0 toread)
[2014/06/27 09:06:48,  3] smbd/process.c:1273(switch_message)
  switch message SMBsesssetupX (pid 20548) conn 0x0
[2014/06/27 09:06:48,  3] smbd/sec_ctx.c:310(set_sec_ctx)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2014/06/27 09:06:48,  3] smbd/sesssetup.c:1404(reply_sesssetup_and_X)
  wct=12 flg2=0xc807
[2014/06/27 09:06:48,  2] smbd/sesssetup.c:1360(setup_new_vc_session)
  setup_new_vc_session: New VC == 0, if NT4.x compatible we would close all old resources.
[2014/06/27 09:06:48,  3] smbd/sesssetup.c:1160(reply_sesssetup_and_X_spnego)
  Doing spnego session setup
[2014/06/27 09:06:48,  3] smbd/sesssetup.c:1202(reply_sesssetup_and_X_spnego)
  NativeOS=[] NativeLanMan=[] PrimaryDomain=[]
[2014/06/27 09:06:48,  3] libsmb/ntlmssp.c:745(ntlmssp_server_auth)
  Got user=[brientje] domain=[clientPC] workstation=[clientPC] len1=24 len2=222
[2014/06/27 09:06:48,  3] smbd/map_username.c:188(map_username)
  Mapped user brientje to pluto_brientje
[2014/06/27 09:06:48,  3] auth/auth.c:222(check_ntlm_password)
  check_ntlm_password:  Checking password for unmapped user [clientPC]\[brientje]@[clientPC] with the new password interface
[2014/06/27 09:06:48,  3] auth/auth.c:225(check_ntlm_password)
  check_ntlm_password:  mapped user is: [CORIUS]\[pluto_brientje]@[clientPC]
[2014/06/27 09:06:48,  3] smbd/sec_ctx.c:210(push_sec_ctx)
  push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2014/06/27 09:06:48,  3] smbd/uid.c:428(push_conn_ctx)
  push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2014/06/27 09:06:48,  3] smbd/sec_ctx.c:310(set_sec_ctx)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2014/06/27 09:06:48,  3] smbd/sec_ctx.c:418(pop_sec_ctx)
  pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2014/06/27 09:06:48,  3] auth/auth_sam.c:282(check_sam_security)
  check_sam_security: Couldn't find user 'pluto_brientje' in passdb.
[2014/06/27 09:06:48,  2] auth/auth.c:320(check_ntlm_password)
  check_ntlm_password:  Authentication for user [brientje] -> [pluto_brientje] FAILED with erro
r NT_STATUS_NO_SUCH_USER
[2014/06/27 09:06:48,  3] smbd/error.c:60(error_packet_set)
  error packet at smbd/sesssetup.c(122) cmd=115 (SMBsesssetupX) NT_STATUS_LOGON_FAILURE
[2014/06/27 09:07:04,  0] lib/util_sock.c:539(read_fd_with_timeout)
[2014/06/27 09:07:04,  0] lib/util_sock.c:1498(get_peer_addr_internal)
  getpeername failed. Error was Transport endpoint is not connected
  read_fd_with_timeout: client 0.0.0.0 read error = Connection reset by peer.
[2014/06/27 09:07:04,  3] smbd/sec_ctx.c:310(set_sec_ctx)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2014/06/27 09:07:04,  3] smbd/connection.c:31(yield_connection)
  Yielding connection to
[2014/06/27 09:07:04,  3] smbd/server.c:849(exit_server_common)
  Server exit (failed to receive smb request)

10
Users / Samba issue
« on: June 27, 2014, 07:06:39 am »
Hey,

Last days, I played around with the users and the group they belong to. And did also some apt-get udpates. And now I can't login anymore with samba protocol. Apparantly the user don't exist anymore?

The clientPC = Windows 7 & Linux Mint 17
The user = brientje

Quote from: grep brientje log.ClientPC
  check_ntlm_password:  Authentication for user [Brientje] -> [pluto_brientje] FAILED with error NT_STATUS_NO_SUCH_USER
  check_ntlm_password:  Authentication for user [Brientje] -> [pluto_brientje] FAILED with error NT_STATUS_NO_SUCH_USER
  check_ntlm_password:  Authentication for user [Brientje] -> [pluto_brientje] FAILED with error NT_STATUS_NO_SUCH_USER
  check_ntlm_password:  Authentication for user [Brientje] -> [pluto_brientje] FAILED with error NT_STATUS_NO_SUCH_US..........

Quote from: grep brientje /etc/samba/usermap.txt
pluto_brientje = brientje

Quote from: grep brientje /etc/samba/smbpasswd
pluto_brientje:10001:DD4D27348EDCBEBA93E28745B8BF4BA6:3D83FDBC71EF25E316C6BADA8AFF8D19:[U          ]:LCT-00000001:,,,


Quote from: grep brientje /etc/passwd
brientje:x:1001:1003:Brientje User,,,:/home/brientje:/bin/bash
pluto_brientje:x:10001:10001:,,,:/home/user_2:/bin/false

Quote from: id -a brientje
uid=1001(brientje) gid=1003(brientje) groups=1003(brientje),1001(public)

Quote from: id -a pluto_brientje
uid=10001(pluto_brientje) gid=10001(pluto_brientje) groups=10001(pluto_brientje),1001(public),1003(brientje)


Any idea / suggestion?

11
Users / Re: "Respond to events" is 'empty' after restore
« on: May 20, 2014, 09:38:42 am »
I'm a bit embarrassed to say this. But i've found the issue...

I've installed LinuxMCE 8.10.
And did a recovery (mysql -u root -p pluto_main < pluto_main.dump) of a LinuxMCE version 10.04

So I've lost 3 day because I entered the wrong (old) cd.  :-\
You've got no idea how stupid I feel myself...

12
Users / "Respond to events" is 'empty' after restore
« on: May 19, 2014, 06:52:56 am »
Hey,

I just had to reinstall my linuxmce server... A OS failure disk...  :-X
But no prob, i've got a backup. ;)

I just restored all data, and put the databases back in place.
But to my surprise, the 'respond to events' are empty when you look in the admin page. All other settings seem to be corect.
When I check the database itself, I see that the the table 'pluto_main'-'Eventhandler' contains all my created events.

Any hints what I've forgot/did wrong?

13
Users / EIB: relay hangs in scenario?
« on: November 28, 2013, 05:53:18 pm »
Hey,

I'm using now for about 2 years linuxmce to control my home automation. And it works greats... ;)
But this week, when I trigger my 'house sleep' scenario, a relay hangs. Before, I used this scenario almost daily.


The strange this is, that with console (groupswrite ip:127.0.0.1 3/1/81 1), I can normally control the relay.

But when I runs the scenario with that relay, the relay doesn't switch of completely? I need to manually give it an extra push. But when I check the status then in linuxMCE, this relay is still in the 'on/1' status.

Any idea?


14
Users / Re: Heating Boiler Viessman
« on: November 02, 2013, 08:07:26 am »
I found Vitogate to be too expensive for what it can do.

I agree with you. The prices i'm finding are about 700 euros, and this only to convert the signals?
But I must say that each time a look at eib hardware (fe the network convertor), i've got this feeling.  ???

And you're correct that once you've setup the heating, it should be fine.
But i was thinking of let all things work together. Fe heating down, windows open, shutters down...
This way, I would first play a bit with windows/shutters/... to control the temperature. And if this isn't enough, the heating can kick in.
But I agree, the heating should be able to cope with it on his own. Nevertheless it would be great to have 1 control center for all...


15
Users / Re: Heating Boiler Viessman
« on: October 31, 2013, 05:32:55 pm »
Whatever we can?  ;)

I was thinking about changing temperature, reading the temperature...
And in later phase playing with temperature, closing windows...

Pages: [1] 2 3 ... 26