Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Emiku

Pages: [1] 2
Users / Re: [SOLVED] Can't play music
« on: August 14, 2010, 02:10:43 pm »
This is working for me too.

Users / Re: Can't play music
« on: August 13, 2010, 12:43:42 pm »
I have the same problem with snapshot 23227, it used to work just fine. The files is on a NAS i have not had any problems with them before.

Not that this helps anything but it clarifies that the problem is not unique to b4rney.


My guess is that niz changes to:

Media_Plugin_Grids.cpp or MediaAttributes_LowLevel.cpp is the cause. I have not had the chance to test it out.

Installation issues / Re: Starting Core Only - LinuxMCE 810-Alpha2.36
« on: October 01, 2009, 08:08:13 am »
Hi Charles,

There are to ways to do this:

1: If you have your system up and running (and up to date) you edit your /etc/pluto.conf file and set autostartmedia = 0

2: If you are going to install a new system edit mce_wizard_data-(single/double) and set c_deviceType=1 (1=Core, 2=Hybrid, 3=DiskedMD)

Also if you read the release notes from 2.36 under pluto-boot-scripts (234) it states:

- Do not start X, if AutostartMedia in pluto.conf is not 1

I would go for the first solution it seems that if you are running mythtv the backend does not get installed plus you might want to run mythsetup.

I had similar issues with VDR.

- Emil

Installation issues / Re: strange 8.10 install issues
« on: September 30, 2009, 11:21:46 am »
Are you using a single nic? If so try to do  a reinstall if you want to try this out:

DO NOT USE DHCP for you internet connection!

I have had the same symptoms as you, havnt done a reinstall yet, looks like something goes wrong when the system is setting up your internet access and does not handle DHCP correctly. My guess is that at some point it did not work properly in the install and hence you are missing some packages or some missing configurations due to these errors ...

just my 5 cent.

- Emiku

Developers / Re: Orbiter on Framebuffer
« on: July 10, 2009, 01:04:02 pm »

So is this a 'POC' or to make the orbiter more lightweight on "small" devices, small arm boards etc etc..?

- Emiku

Developers / Re: Workshop: Datagrids
« on: June 24, 2009, 09:05:08 pm »
Count me in!

Developers / Re: 0810 alpha 2 no /usr/pluto/diskless
« on: May 09, 2009, 06:06:52 pm »
I then tried my Asus Pundit with a Nic that was usupported in 7.10 and a ATI integrated x1200 or something.
That one is also AMD 64bit.
After a while the core MD asked for a Quick reload and the AV Wizard came up on the MD.
No drivers, no reboot, no xorg setup, pure fun :)
And a full regen of all orbiters


Cirion, do you use UI2 and does the photoscreen saver work?

- Emiku

Users / Re: iPhone Orbiter Design
« on: April 22, 2009, 07:26:55 pm »
Hi Possy,

Great work, I just saw this thread now, I might be going blind? I took a quick look at the source and it looks promising I will try it out when I get my 0810 core running. I currently use my ipod as a remote for PLEX/Seven (XBMC for mac) every day and I can't imagine using LMCE without it.

All the best, and again thanks for the contribution.

- Emiku.

Installation issues / Re: gsod
« on: April 17, 2009, 09:25:28 pm »
Hi 'Original nick'  :P,

Are you trying to use UI2 with alpha blending on an Intel GMA ?

- Emiku

Installation issues / Re: MD mouse curser lag
« on: April 17, 2009, 07:49:52 pm »
I really don't have an idea. Are your mouse/keyboard wireless?

I had a similar problem with my gyration remote, I used the bundled USB cable to get the receiver away from the computer that helped.

Users / Re: Sorry
« on: April 15, 2009, 11:08:10 am »
Powerbits, if you want that screen crack removed try disabling UI2 alphablend and go with UI2 overlay!

- Emiku

Developers / Re: Can not install the development...
« on: March 05, 2009, 07:46:05 am »

Maybe if you gave us these error we might be able to help you.

- Emil

Users / Re: Cheaper Orbiters?
« on: January 19, 2009, 09:01:09 pm »
The 229$ ipod touch as a web orbiter?

Developers / Re: Danfoss RA-plus - controllable with linuxMCE 0710 ?
« on: January 12, 2009, 08:37:21 am »
Hi Viking,

The W (Wireless (?)) model is z-wave enabled the other one is just programmable.

Btw. I read that the setback method was the only economical way to do it, it would be too expensive to lower the temperature beblow 2-3 degree C and then later heat it up again.

You could also look into remotely controlling your mixing Shunt, that would work but set the same temperature in the whole house.


Developers / Re: Danfoss RA-plus - controllable with linuxMCE 0710 ?
« on: January 09, 2009, 07:50:01 pm »

Make sure it is the Danfoss RA-plus__W__ model =)

Pages: [1] 2