Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - ThePulse

Pages: [1]
1
Installation issues / Re: APPserver died 0710b3
« on: January 27, 2008, 04:42:04 pm »
Hi again

No doubt that the problem is my Sound Blaster Live 24bit external.
I just enabled my onboard soundcard and made a new install and then everything worked.
But somehow i need to get that SBLive soundcard to work because my computer is standing 15 meters away in another room (to prevent noise)
and i am sending the sound via coax cable and my onboard soundcard does not support that.

How to get my SBlive "card" to work ????

BTW. I have audio (When you can see and hear me......)
So maybe the problem is this amixer thing somebody talked about

Michael

2
Installation issues / APPserver died 0710b3
« on: January 27, 2008, 02:31:24 pm »
Hi

Can anybody help me here, appserver died

I read some of the topics with soundcard and so on, but im pretty stuck.
I have a soundblaster live 24bit external soundcard - the field with aaudiodriver is empty - Please help

Michael

== ATTEMPT FRESH START ==
1       01/26/08 18:25:11       /usr/pluto/bin/Spawn_Device.sh 15 (spawning-device)     23334 Dev: 15; Already Running list:
== FRESH START ==
1       01/26/08 18:25:11       /usr/pluto/bin/Spawn_Device.sh 15 (spawning-device)     device: 15 ip: localhost cmd_line: App_Server
0       01/26/08 18:25:12       15 (spawning-device)    Entering 15
========== NEW LOG SECTION ==========
1       01/26/08 18:25:12       15 (spawning-device)    Starting... 1
1       01/26/08 18:25:12       15 (spawning-device)    Found /usr/pluto/bin/App_Server
10      01/26/08 18:25:12.087           Device: 15 starting.  Connecting to: localhost <0x2b62f4823700>
10      01/26/08 18:25:12.094           Setting timeout for socket 4 to 20 <0x2b62f4823700>
Return code: 136
3       01/26/08 18:25:12       15 (spawning-device)    Device died... count=1/50 dev=15
Sat Jan 26 18:25:12 PST 2008 died
========== NEW LOG SECTION ==========
1       01/26/08 18:25:22       15 (spawning-device)    Starting... 2
1       01/26/08 18:25:22       15 (spawning-device)    Found /usr/pluto/bin/App_Server
10      01/26/08 18:25:22.315           Device: 15 starting.  Connecting to: localhost <0x2b7d1de42700>
/var/log/pluto/15_App_Server.log         

3
Installation issues / No Media
« on: September 25, 2007, 10:28:34 am »
Hi all

Please help me here!
I can´t get any media to show on LinuxMCE

My media is on a buffalo terastation - i have tried the guide to ad i manually - nothing happens!
LinuxMCE is finding the IP and i´m clicking File Server - nothing happens (we are talking hours)

I have read a lot of topics on this and tried everything i can find - no luck

People are talking about choosing between public and Linux directory (or something like that)
Some are saying copy it to public/data/picture for example - but those are write protected

Please help me here step by step - cause i´m new to linux

Michael

4
Installation issues / Re: Install experience/Problems from DVD
« on: September 24, 2007, 11:07:54 pm »
Hi all!

1. MS Remote doesn´t work

2. LinuxMCE says that something didn´t start up right, but it seems to work anyway and i can´t find the log file

3. I have to unplug my Logitech wireless dongle and plug it in again every time i start linuxMCE to get my keyboard and mouse to work

4. Linux MCE didn´t find my media files on my Nas server (buffalo terrastation)

5. No TV - myth tv setup hangs my computer

6. VERY low res - the text can´t stay inside the buttons

Can you PLEASE help me get past theese points, because i want to get it to work this time!


Quote
Okay, i'll deal with your issues one at a time:

1. what dongle are you using? I am using a USB UIRT, and it is working flawlessly, no configuration needed.
I´m not sure - it comes with hauppauge pvr500 - i think it´s for mce2005 - the only text i can see is on the remote - it says RC6

Quote
2. what didn't start up, correctly?
I have no idea ;) how can i find out !?

Quote
3. I use a different wireless keyboard/mouse combo (very rarely, because I use my Fiire chief most of the tiem), from Adesso.. their wireless keyboard/mouse combo that works flawlessly.
Logitech! what can you do ;)

Quote
4. did you tell it to use LinuxMCE's directory structure? it works best if you do this, and move the files into those directories.
Well! i guess that is true - but you know its a terastation for a reason - i have 600gig of data on that thing!
But OK! where do i do that ?????

Quote
5. very strange..what tuner setup are you using?
PVR500 i have configured the back end and i have been running the front end from desktop and i can see TV there (it is flickering and there is no audio) , but pressing TV from LinuxMCE gives me: MythTV is having problems - reset the backend?

Quote
6. it's not a question of being low res, it's just a fact of the skin generation process..this will be refined.
OK!

Quote
as for the video problems you had, did you ever look at the AVWizard page on the wiki? you don't have to blindly press keys to get past a point... the number keys on the top select the resolution and input to use. also it is worth noting that on NVIDIA cards with mixed ports, the first VGA port is always the DVI port with a dongle attached (this is a peculiarity of both the way the cards are designed and NVIDIA's port of the Linux driver.)..so attach a DVI to VGA dongle if you need to... no need to flip flop video driver stuff.
So you say that i can just press ? 2 or something like that at it would select a differet output? A lot of people are having problems with this - maybe it should be pointed out more!!!! BTW. i´m running DVI->HDMI
Just tested this for the "fun" of it - geeeeee! that could have saved me hours -> but that is also a problem to many fixes and workarounds to read and deal with!

Thank you for the help so far
[/quote]

5
do this:
On boot press ESC to get access to GRUB boot option -> chose recovery
wait until it is done -> type: sudo nano /etc/X11/xorg.conf     press Enter (Capital X)
find the spot where it says NVIDIA and change it to NV -> press CTRL-o press enter CTRL-x and write sudo reboot

thats it -> but remeber to set it back to NVIDIA after the setup!

HA! That worked! Got me through to the setup wizard at any rate! The downside is that I selected the medium graphics option (full screen images with no alpha blending), which I think my graphics card didn't like as after LMCE had finished building things it told me that it couldn't start OpenGL. I'll try the lowest setting :'( tonight (ran out of lunch-break time!).

no - now you have to set it back to NVIDIA again

6
Hmmm... I might try it again later and leave it going for an hour or so. The problem is that the machine isn't outputting anything at all - my monitor just turns itself to stand by as if theres nothing getting to it? I had left it for quite a while in the numerous times I've been trying to get it working, but I'll give it even longer if thats what you suggest.

do this:
On boot press ESC to get access to GRUB boot option -> chose recovery
wait until it is done -> type: sudo nano /etc/X11/xorg.conf     press Enter (Capital X)
find the spot where it says NVIDIA and change it to NV -> press CTRL-o press enter CTRL-x and write sudo reboot

thats it -> but remeber to set it back to NVIDIA after the setup!

7
Installation issues / Re: Install experience/Problems from DVD
« on: September 24, 2007, 11:10:13 am »
Hi - could you post the link of how to change the xorg.conf file? I think I may be having the same problem - did the signal disappear after the Kubuntu loading screen?

Hi!
No problem  ;)

try this first:
The 2 time i installed from the DVD i did it "blindfolded"
when you have your no signal:
press enter -> right arrow(on keyboard) -> down arrow -> right arrow -> down arrow -> press enter
Now you selected VGA - 720P - 60Hz and the screen "reloads" to those settings - if it doesn´t help do the thing below:


On boot press ESC to get access to GRUB boot option -> chose recovery
wait until it is done -> type: sudo nano /etc/X11/xorg.conf     press Enter (Capital X)
find the spot where it says NVIDIA and change it to NV -> press CTRL-o press enter CTRL-x and write sudo reboot

thats it -> but remeber to set it back to NVIDIA after the setup!


8
Installation issues / Install experience/Problems from DVD
« on: September 24, 2007, 10:14:39 am »
Hi all!

Hmmmmm! I think the video is "telling a lie" this is really not so simple as shown in the video- this is my thierd go for linuxMCE - but no luck so far!

I know that this is opensource - don´t see it as a complaint, i´m just frustrated that the video is making it oh so simple and almost laughing at Microsoft (uf i said the word ;-) ) but in MS´s cases the SW works 9 out of 10 times - this is maybe 1 out of 10. But hang in there!

I think the team should use more time to make this simple to get running rather on alarm features and things like that!

Now to my install experience/Problems:

1. Got the DVD started to install hangs after this: Install hangs after /dev/sda5: uuid="3604..." type="swap" on DVD install.
    Found out that the DVD doesn´t support SATA, so i got my self an IDE drive - and now we are back in buisness

2. The DVD installs, starts up for the first time - and........... No signal: GFX card: Nvidia 7600GT - TV: LG 37lc2r
    This has been the same problem on all versions so far!
    Found out that a guy got it working by changing the driver in xorg.conf to NV.
   
3. Now i get the video from the Video/audio setup - but can only see a small portion of the screen - the only Resolution i can get to work is 720p and i get through the setup by guessing what to do

4. Next stop is grey screen and something about can´t start something - I change the driver back to nvidia again and get past this point and LinuxMCE starts up!
   
I go through the setup wizzard but only the screen is there - no music, no photos, no TV

So here are my issues i need help on:

1. MS Remote doesn´t work

2. LinuxMCE says that something didn´t start up right, but it seems to work anyway and i can´t find the log file

3. I have to unplug my Logitech wireless dongle and plug it in again every time i start linuxMCE to get my keyboard and mouse to work

4. Linux MCE didn´t find my media files on my Nas server (buffalo terrastation)

5. No TV - myth tv setup hangs my computer

6. VERY low res - the text can´t stay inside the buttons

Can you PLEASE help me get past theese points, because i want to get it to work this time!


Pages: [1]