LinuxMCE Forums
General => Installation issues => Topic started by: _lwolf_ on September 22, 2009, 03:04:38 pm
-
Hi!I installed Kubuntu 8.10 and the latest alpha build of linuxmce.
After install there was no sound at all, and in aplay -L there was no SPDIF.then I install the last alsa(1.0.21) and got spdif.Now I've got mplayer working with spdif - mplayer "filename" -ao alsa:device=hw=0,2
.
aplay -l1.0.
**** Список PLAYBACK устройств ****
карта 0: CK804 [NVidia CK804], устройство 0: Intel ICH [NVidia CK804]
Подустройства: 1/1
Подустройство №0: subdevice #0
карта 0: CK804 [NVidia CK804], устройство 2: Intel ICH - IEC958 [NVidia CK804 - IEC958]
Подустройства: 0/1
Подустройство №0: subdevice #0
aplay -L
front:CARD=CK804,DEV=0
NVidia CK804, NVidia CK804
Front speakers
surround40:CARD=CK804,DEV=0
NVidia CK804, NVidia CK804
4.0 Surround output to Front and Rear speakers
surround41:CARD=CK804,DEV=0
NVidia CK804, NVidia CK804
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=CK804,DEV=0
NVidia CK804, NVidia CK804
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=CK804,DEV=0
NVidia CK804, NVidia CK804
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=CK804,DEV=0
NVidia CK804, NVidia CK804
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=CK804,DEV=0
NVidia CK804, NVidia CK804 - IEC958
IEC958 (S/PDIF) Digital Audio Output
null
Discard all samples (playback) or generate zero samples (capture)
in alsamixer:
S/PDIF in ON;
S/PDIF Playback AC97-SPSA = 0;
S/PDIF Playback Source - PCM;
But in AVwizard and Xine still have nothing. For xine i've checked:
audio.speaker_arrangement:Pass Through
audio.device.alsa_passthrough_device:iec958:CARD=CK804,DEV=0
in MediaDirector soundcard is CK804.
Please help!
-
Funny, that I did not need to update any software to get CK804 based board running under *7*.10 ... ;) Probably works under 810 just as well, using the information in http://wiki.linuxmce.org/index.php/Nvidia_CK804
-
Funny, that under 7.10 there was no problems to me too)
-
Did you try the wiki page?
-
Yes, I tried this,and also:
http://wiki.linuxmce.org/index.php/Sound_Cards
and all from
http://forum.linuxmce.org/index.php?topic=2921.0
P.S. is it possible to make mplayer default player for mce?
-
Hi !!
I have same problem linux 8.10
Select coaxial in Av Wizard because coaxial = spdif and spdif= coaxial
try
-
just reinstall all system, to be sure that its not my fault somewhere...
1.after first boot in clear kubuntu I checked sound via SPDIF- WORKING
2.upgraded all system - sound WORKING
3.after install of mce:
avwizard - no sound
KDE - no sound
P.S.
Select coaxial in Av Wizard because coaxial = spdif and spdif= coaxial
try
it doensnt work for me((