LinuxMCE Forums
General => Users => Topic started by: Bodi79 on August 02, 2009, 05:11:31 pm
-
I searched around the forum and wiki.. maybe i´m too stupid... Pleaze help !
My Core has a 500gig SATA Samsung Drive which is now almost filled up with data.
So i added a new 1tb Drive, which i formatted in ext3 and was later recognized from lmce. (Using LMCE´s directory structure)
But.. i can´t access it when i open the 192.168.80.1 smb share, it only shows my a left space of 23 gigs (from my Main Drive)
When i try too add data too the drive via the KDE Desktop, i can´t copy anything on it (write protected).
What am I doing wrong.
Thanx
Bodi79
-
Hi,
If you go into webadmin and in the left window at the bottom of the column open device tree.
Open your Core and see if it's there.
-
Hey pigdog !
Yep the Drive is there..
And i now ran in a new problem, if i go under media on my md´s it always shows my "floorplan" but not the media on the drive...
Don´t know what went wrong there..
Cheers
Bodi79
-
Hi,
Do you mean to say that on your MD when you go main menu Media> only Floorplan submenu appears and not
Floorplan, Manage Drives, Playlists, Pictures, Audio, Video, TV submenus?
-
Hey pigdog !
Exactly.. i only got floorplan shown on the MD´s...
But on the Core alls Media is there..
Cheers
Bodi79
-
Hi,
Please see this thread.
http://forum.linuxmce.org/index.php?topic=8607.0
Since bitmonkey is now wrestling with hdmi audio problems I would guess that a core rebuild fixed his original problem and he didn't mark the issue resolved.
You could always try to PM him to find out.
-
Hey Pigdog !
Installed my Core again, everything works now..
But my adding Harddrive Problem remains.
If if add a ext3 formatted harddrive it will be detected and i can set it up with lmce directory structure.
But it does not show up on the home directory nore on the smb share... only the main disk is visible?
And yes .. the drive is shown under core in lmce admin
Pleaze help
-
Hi,
1) Have you upgraded to the latest alpha 2.29?
2) The new hard drive, did you install it on your Core/Hybrid?
-
Hey again !
Yep installed with latest 2.29
And on the core/hybrid
Cheers
Bodi79
-
Hi,
Go into webadmin at bottom of left hand screen open " Show devices tree".
Open Core find your storage disk and check PK_Users.
Does it says Public or LinuxMCE directory tree.
-
It says LMCE´s Directory Structure..
Cheers
Bodi79
-
Hi,
In that template there are some check boxes.
Is online checked?
-
Yep.. it´s online ;-)
Description *
Device Template Internal HDD #1790
Device Template Comments
This device is controlled via
Room
Entertain areas Bedroom (Master)
Home Theater
Server room
Manually Configure EA
IP Address
MAC Address
Ignore On/Off On Off:
Reconfigure device
Use 5 second pings to ensure connection stays alive.
State
Status
Disabled
Registered: No
Device Pipes Used
Member Of Group
No groups for device
Create new device group
Related Devices
No related devices
Device data
PK_Users
Use Automatically
Block Device
Directories
Filesystem
Free Disk Space in MBytes
Serial Number df0d2df6-c72f-4721-88c7-9e4c5aa29d58
Auto-assign to parents room
Readonly
Online (YES IT`S ONLINE)
UUID df0d2df6-c72f-4721-88c7-9e4c5aa29d58
Capacity 466G
-
Hi,
I would just like to clarify...
All you should have to do with the new hard drive is format it with ext3, then install it in your core and wait for LinuxMCE to detect it.
LMCE will prompt you about it and you select use the LinuxMCE folder structure.
Did you install alpha 2.29 from scratch or upgrade from an earlier release?
-
Hello again !
The Install was made with Alpha 2.27
And it works as you wrote... ext3 format... recognized by lmce.. and so on..
But i can´t access the drive via smb share or kde desktop
Cheers
-
Hi,
Via smb share?
Are you trying to access the drive on the LMCE system from another computer on the network?
-
Hey again !
Yes i´m accessing the LMCE System via SMB on another system...
LinuxMCE offers my the Shares via SMB in my network.. and i wan´t too copy my media on it.. (just too clarify)
But it only shows me the first harddrive... not the second one i added
Cheers
Bodi79
-
Got it working but i don´t know why..
I delete the device again for three times and installed again... and now it works..
Cheers and Thanx
Bodi79