LinuxMCE Forums

General => Users => Topic started by: compaqpresario on July 15, 2009, 10:11:39 pm

Title: 8.10 Mainboard suggestions
Post by: compaqpresario on July 15, 2009, 10:11:39 pm
Anybody have any Mainboard/chipset recommendations for use with 8.10? My Abit AN-M2HD is not making the cut :)
Title: Re: 8.10 Mainboard suggestions
Post by: merkur2k on July 15, 2009, 11:24:16 pm
the M3N78-EM has been working very well for several of us. the only gotcha is needing to upgrade alsa to get sound working.
Title: Re: 8.10 Mainboard suggestions
Post by: skeptic on July 16, 2009, 01:08:50 am
I don't know about the rest of you, but for MDs I'm going ION: Acer AspireRevo, ASRock 330, home built..  Not sure on the details, I'll figure that out when 8.10 is out and I'm ready to replace my existing junk computers with actual small and hidden MDs.  VDPAU support is key for me.
Title: Re: 8.10 Mainboard suggestions
Post by: compaqpresario on July 22, 2009, 09:26:19 pm
Thanks fellas, any other suggestions before i jump in buy a M3N78-EM for my core? By the way i did dip into the motherboard wiki....but it seems to be all mixed up with 7.10 and 8.10 boards.  8)
Title: Re: 8.10 Mainboard suggestions
Post by: tkmedia on July 23, 2009, 09:59:34 am
Your abit should work just fine... you may need the older 177 nvidia drivers. but thats it.



Tim




Title: Re: 8.10 Mainboard suggestions
Post by: compaqpresario on July 24, 2009, 02:18:05 am
yep, tried it with the 177.82 drivers to no avail. Still have the same issues as anupindi007 and having to use vesa drivers because of the that old black screen problem.
Title: Re: 8.10 Mainboard suggestions
Post by: geekyhawkes on July 24, 2009, 06:59:59 pm
Ive been using an M378-EM under the 0810 alpha for a few months and it all works fine.  Just follow the wiki page and the motherboard works!
Title: Re: 8.10 Mainboard suggestions
Post by: compaqpresario on July 24, 2009, 08:41:27 pm
yep, if i can't get my board working i may have to throw more money into mce and go with that board.  :(
Title: Re: 8.10 Mainboard suggestions
Post by: davegravy on July 24, 2009, 10:22:46 pm
Another vote for the M3N78-EM
Title: Re: 8.10 Mainboard suggestions
Post by: Murdock on July 24, 2009, 11:34:42 pm
Would the M3N78-EM motherboard be a recommendation for diskless MDs as well, or is it too much for an MD?
Title: Re: 8.10 Mainboard suggestions
Post by: geekyhawkes on July 25, 2009, 12:48:20 pm
You could use it as an MD, but IMHO its overkill (unless you have one lieing around). 

Title: Re: 8.10 Mainboard suggestions
Post by: merkur2k on July 25, 2009, 04:15:31 pm
I think it actually makes more sense as a MD than a core or hybrid, if only just because it only has one nic. it makes for a fantastic single board setup that has everything needed. there are some really tiny matx cases out there too, so it can be nearly as compact as the itx setups.
I dont see why it would be overkill, the MD uses much more resources than the core.
Title: Re: 8.10 Mainboard suggestions
Post by: Murdock on July 25, 2009, 10:03:27 pm
Thank you!

Ryan