LinuxMCE Forums
General => Installation issues => Topic started by: itsmeok on January 16, 2009, 09:29:34 am
-
I have linuxmce 7.10 RC2 running on a older system with only 768 MB of memory. System is running fine. When I look in System load tool I see that the memory is completely used. No issue with that but I see that I have about 2 GB of swap memory that is almost not used 37 MB of 2 GB. Is this normal or do I need to change a setting so it will be used aswell.
Do more people see this ?
-
I have linuxmce 7.10 RC2 running on a older system with only 768 MB of memory. System is running fine. When I look in System load tool I see that the memory is completely used. No issue with that but I see that I have about 2 GB of swap memory that is completely unused. Is this normal or do I need to change a setting so it can be used aswell.
Do more people see this ?
We should all have "problems" like this. ;)
-
When you are looking at "used" memory, you are almost certainly seeing the total physical RAM used my the kernel and processes plus the amount being used a file caches and buffers. The system will deliberately use up a large percentage/most of your "free" memory to cache files off disk, etc - this then dramatically improves performance when accessing those files. Windows does exactly the same thing.
So your actual memory use will be significantly lower than that figure, meaning there is no call for swap space yet. Of course there isn't much point caching files in swap thus you get the situation you are seeing.
-
you can achieve more swap usage by removing physical ram. Or you could run a malloc() loop in a C 3-liner.
br, Hari
-
you can achieve more swap usage by removing physical ram. Or you could run a malloc() loop in a C 3-liner.
br, Hari
rotflmao