LinuxMCE Forums
General => Users => Topic started by: maybeoneday on January 11, 2009, 03:53:10 pm
-
Hi all,
after dicking around trying to establish which usb port a device used (as in ttyUSB rather than pci0000/00:000:10:2+1 for example), to try and create a
template,I've managed to screw something up.
I followed wiki.linuxmce.com/index.php/Serial_Hack, and get the following,
linuxmce@dcerouter:~$ tree -fi /dev | grep ttyUSB
/dev/ttyUSB0
/dev/ttyUSB1
linuxmce@dcerouter:~$ tree -fi /dev | grep ttyS
/dev/ttyS0
/dev/ttyS1
/dev/ttyS2
/dev/ttyS3
linuxmce@dcerouter:~$
I actually have 6 usb (4 used) and 1 serial port(unused), so that's obviously problem 1, more important is that now every template shows "no serial port detected"
can anyone tell me /hint
a-what's happening?
b- how to return to previous state?
c- how to find out ttyusb ? used by a piece of equipment ?
thanks in advance,
Ian
-
I'd assume you have broken the ListSerialPorts.sh script.
br, Hari
-
Hari
;D sort of gathered that, anybody,(preferably with popcorn ;D ) (without 810 "duties")any pointers ?
regards,
Ian