LinuxMCE Forums
Archive => Archive => Pluto Main Installation & IR codes => Topic started by: archived on December 13, 2005, 10:35:08 pm
-
Trying setup MythTV without luck. First I tried to set up the Media Director as follows. Pluto login> Wizard >Devices >Media Directors>
The "PVR Capture Card" drop-down list offered the following options: "none, Generic Blackbird Card, IVTV Capture Card, or TechnoTrend."
How do I configure the Media Director to work with a common Conextant/Brooktree 878 base card? This particular card (TV Wonder VE) worked in my Debian Distribution -- prior to intallation into a newly built Pluto box.
I selected the Blackbird Card because that was the closest to my needs but no go.
Thanks all!
-
try to use IVTV drivers not blackbird. blackbird drivers are for cx88 chipsets.
try to update the card and install the firmware for it.
i think we spoke yesterday on live support.
-
Trying setup MythTV without luck. First I tried to set up the Media Director as follows. Pluto login> Wizard >Devices >Media Directors>
The "PVR Capture Card" drop-down list offered the following options: "none, Generic Blackbird Card, IVTV Capture Card, or TechnoTrend."
How do I configure the Media Director to work with a common Conextant/Brooktree 878 base card? This particular card (TV Wonder VE) worked in my Debian Distribution -- prior to intallation into a newly built Pluto box.
I selected the Blackbird Card because that was the closest to my needs but no go.
Thanks all!
I think that mythtv still has to be setup by hand.... Setup on web page you talk about is I guess more about adding ivtv or other drivers to the MD. And I think you don't need any of that for bttv card. You just set it up in mythsetup as you used to do in mythtv...
I'm not 100% on this (I own pvr350 card)...
HTH,
Regards,
Rob.
-
Rob Wrote:
I think that mythtv still has to be setup by hand.... Setup on web page you talk about is I guess more about adding ivtv or other drivers to the MD. And I think you don't need any of that for bttv card. You just set it up in mythsetup as you used to do in mythtv...
I'm not 100% on this (I own pvr350 card)...
HTH,
Regards,
Rob.
Thanks Rob,
That's just the approach to take. Now I'll install Mythtv on a separate machine with a bttv card, learn how Myth works, then set it up in Pluto.
What's HTH ?
Thanks
-
Hope This Helps....
Regards,
Rob.