LinuxMCE Forums

General => Developers => Topic started by: PeteK on May 07, 2008, 08:47:49 am

Title: USB Plug N Play issues
Post by: PeteK on May 07, 2008, 08:47:49 am
I'm trying to recreate my Insteon template from memory and the existing code in the SVN, as I don't have it any more.  One thing I'm having problems with is the PNP section.  Before, I was able to have LMCE auto detect based on the USB ID in the PNP section.  Now, for some reason, I can't get it to auto-detect connection of the Insteon PLC, even though the device shows up when I do an lsusb call.  The existing Z-wave template detects USB devices OK.   The controller comes up as an HID device with Vendor ID: 0x10bf and Product ID: 0x0004.

This is pretty frustrating, as I know this was working before.  Does anyone know of the best way to go about debugging this or who may be able to help?


P.S. I've attached screen grabs of the template.

( (

( (
Title: Re: USB Plug N Play issues
Post by: ddamron on May 08, 2008, 02:58:43 pm
Hi Pete

Give me a bit, I'll try it out on my side tonight.