LinuxMCE Forums

General => Users => Topic started by: los93sol on May 05, 2008, 06:33:28 am

Title: FXO Card
Post by: los93sol on May 05, 2008, 06:33:28 am

I've searched around and found some thread and info similar, but haven't been able to find any concrete answers on this.  I have an X100P card that provides one FXO interface.  I do not and will not be using VOIP in my setup.  What I'm needing to do is accept my POTS line to my core then connect to it with SIP phones and other media directors.  How do I configure LMCE to use the POTS line?  I poked around in the advanced FreePBX pages on the web admin, but couldn't get it working.  Any help as to how the configuration should go?

Title: Re: FXO Card
Post by: bulek on May 05, 2008, 11:12:47 am

Hi,

first you need to get your card working as under normal Asterisk setup (look for more info on http://www.voip-info.org/wiki/index.php?page=Asterisk&utm_source=voip-info&utm_medium=navbox&utm_content=Asterisk (http://www.voip-info.org/wiki/index.php?page=Asterisk&utm_source=voip-info&utm_medium=navbox&utm_content=Asterisk) ).... LMCE uses pretty standard Asterisk+Freepbx setup....

Basically your card will be used in similar fashion as sip trunks... Then you can configure it under freepbx....

HTH,

regards,

Bulek.