LinuxMCE Forums
General => Installation issues => Topic started by: powerbits on April 26, 2008, 01:52:58 pm
-
Hi
I have a PVR150 from hauppauge wo works great under Linux mce and mythtv but its remote does not
The remote is one MCE edition of hauppauge
I have tried this link
http://wiki.linuxmce.org/index.php/Hauppauge_WinTV-PVR-150_MCE
But i get errors at
./configure --prefix=/usr --sysconfdir=/etc/conf.d --with-x --with-driver=mceusb2
make
make install
Also when i use the microsoft mce reciever my remote works.. so it seems to be the IR reciever of hauppauge that does not work
Please help
Tx
Frank
-
The --with-driver option tells LIRC which receiver you are using, not which remote.
-
Can you explain more in detail please?
-
Has the new linux mce 7.10 now support for this remote?
-
I'm not shure wether there exists different versions og 150MCE, but the link you refere to does definetly not work for mine. Mine card seemes to be equipped with a i2c based receiver. This means that you should use the lirc_i2c module, not the lirc_mceusb2 module. I used the installed lirc version, and was able to get a response by removing the lirc_mceusb2 module and adding the lirc_i2c module. Then suddenly nothing worked, and I gave up and bought a windows mce remote instead,...
So my suggestion would be to try the lirc_i2c module
You should se something when you "cat /dev/lirc0", but you would need to stop lircd first
Use irw to verify decoding of your remote.