LinuxMCE Forums
General => Users => Topic started by: MANDINGO on January 28, 2008, 07:13:08 pm
-
Went to CES 2008 and spoke to the fokes over at intermatic and bitched about the linux drivers not being available....
Got a phone call today telling me that they sent me a copy of the linux drivers they have so im gonna give it a try and see if i can get this thing working ill let you guys know.... ;D
Ok got home and found that i need some help with these drivers i posted a copy here
http://www.uploading.com/files/M7CN8NBL/spcp8x5.tar.gz.html
any help would be appriciated
-
I am kind of supprised that no one has commented on this yet? if these are infact working linux drivers this could be a nice boost in the zwave hardware support.
-
hey thats good news. Seems like the Intermatic also uses a spcp8x5 chipset. We got a driver for 2.6.10 from ACT. I ported that to 2.6.2x:
http://svn.charonmedia.org/trac.cgi/browser/vendor/spcp8x5
after installing the kernel module and adding the usb id's to the ZWave device template it should work plug and play.
best regards,
Hari
-
hey thats good news. Seems like the Intermatic also uses a spcp8x5 chipset. We got a driver for 2.6.10 from ACT. I ported that to 2.6.2x:
http://svn.charonmedia.org/trac.cgi/browser/vendor/spcp8x5
after installing the kernel module and adding the usb id's to the ZWave device template it should work plug and play.
best regards,
Hari
Yes the Intermatic uses the spcp8x5 chip... :-)
Andrew
-
i have a question i am adding some info to the spcp8x5.c and spcp8x5.h i have the vid and pid for the intermatic, but i dont know the complete usb device id for now i have placed them as
the .c file
{ USB_DEVICE(SPCP8x5_INTERMATIC_VID , SPCP8x5_INTERMATIC_PID)}, need to replace the INTERMATIC with the right info
the .h file
#define SPCP8x5_INTERMATIC_VID 0x04FC
#define SPCP8x5_INTERMATIC_PID 0x0204
any help would be great and yes the drivers work just wanna add intermatics info in also if this can be done this way ! im comming up with unknown symbol usb_serial_disconnect etc....
-
any help would be great and yes the drivers work just wanna add intermatics info in also if this can be done this way ! im comming up with unknown symbol usb_serial_disconnect etc....
you should use the driver from the charonmedia trunk:
http://svn.charonmedia.org/svn/vendor/spcp8x5/
the original code does _not_ compile on 2.6.2x.
i've just added the vid/pid to the code:
http://svn.charonmedia.org/trac.cgi/changeset/1495/vendor/spcp8x5
best regards,
Hari
-
Hari i had to add a couple of changes but now works completely with intermatic could u post the codes below into the svn thanks
http://www.uploading.com/files/SF8DLVKA/Makefile.html
http://www.uploading.com/files/LQRB9SC4/ringbuf.c.html
http://www.uploading.com/files/3AQJ601L/ringbuf.h.html
http://www.uploading.com/files/Z9X88ZD2/spcp8x5.c.html
http://www.uploading.com/files/AUV49PL5/spcp8x5.h.html
sorry about the files but only place i could post them :-\
-
Hari i had to add a couple of changes but now works completely with intermatic could u post the codes below into the svn thanks
couple?
ah, forgot that type variable assignement:
+ else if(serial->dev->descriptor.idProduct == 0x0204)
+ type = SPCP825_INTERMATIC_TYPE;
its in the trunk. Thank you very much.
Best regards,
Hari
-
Hi i'm curious if this works with v7.10 b3. I compiled this on my 64 bit versioin but I get an error when trying to use it.
looking at dmesg gives me:
/drivers/spcp8x5/spcp8x5.c: Set UART format 0x30b failed (error= -32)
It finds the device and attaches it to ttyUSB0, but the next line is the error above.
Thanks for your help.
-
Using 710beta4, this is what I get when I attach my ha22:
== FRESH START ==
1 03/06/08 15:02:37 /usr/pluto/bin/Spawn_Device.sh 34 (spawning-device) device: 34 ip: localhost cmd_line: ZWave
0 03/06/08 15:02:38 34 (spawning-device) Entering 34
========== NEW LOG SECTION ==========
1 03/06/08 15:02:38 34 (spawning-device) Starting... 1
1 03/06/08 15:02:38 34 (spawning-device) Found /usr/pluto/bin/ZWave
05 03/06/08 15:02:40.405 Child device 35 is disabled <0x2ae6eb644b40>
05 03/06/08 15:02:47.416 Got a reload command from 0 <0x43005950>
05 03/06/08 15:02:48.176 void ClientSocket::Disconnect() on this socket: 0x666b40 (m_Socket: 7) <0x2ae6eb644b40>
Return code: 2
2 03/06/08 15:02:48 34 (spawning-device) Device requests restart... count=1/50 dev=34
Thu Mar 6 15:02:48 CST 2008 Restart
========== NEW LOG SECTION ==========
1 03/06/08 15:02:56 34 (spawning-device) Starting... 1
1 03/06/08 15:02:56 34 (spawning-device) Found /usr/pluto/bin/ZWave
05 03/06/08 15:02:58.613 Creating child 35 <0x2b8749e93b40>
05 03/06/08 15:02:58.613 Note: Device manager has attached a device of type 1820 that this has no custom event handler for. It will not fire events. <0x2b8749e93b40>
05 03/06/08 15:02:58.613 Note: Device manager has attached a device of type 1820 that this has no custom handler for. This is normal for IR. <0x2b8749e93b40>
05 03/06/08 15:06:07.206 Going to rotate logs... <0x43005950>
05 03/06/08 15:10:54.807 void ClientSocket::Disconnect() on this socket: 0x666b40 (m_Socket: 7) <0x2b8749e93b40>
Return code: 0
2 03/06/08 15:10:54 34 (spawning-device) Shutting down... count=1/50 dev=34
Thu Mar 6 15:10:54 CST 2008 Shutdown
== ATTEMPT FRESH START ==
1 03/06/08 15:14:52 /usr/pluto/bin/Spawn_Device.sh 34 (spawning-device) 18690 Dev: 34; Already Running list: 15,16,17,18,27,20,21,22,25,28,24,26,37,
== FRESH START ==
1 03/06/08 15:14:52 /usr/pluto/bin/Spawn_Device.sh 34 (spawning-device) device: 34 ip: localhost cmd_line: ZWave
0 03/06/08 15:14:52 34 (spawning-device) Entering 34
========== NEW LOG SECTION ==========
1 03/06/08 15:14:52 34 (spawning-device) Starting... 1
1 03/06/08 15:14:52 34 (spawning-device) Found /usr/pluto/bin/ZWave
05 03/06/08 15:14:52.613 ZWave::ConfirmConnection : zwave device is empty <0x2ac6424a5b40>
05 03/06/08 15:14:52.980 ZWave::ConfirmConnection : zwave device is empty <0x2ac6424a5b40>
05 03/06/08 15:14:52.980 Cannot connect to ZWave device . <0x2ac6424a5b40>
01 03/06/08 15:14:52.981 Connect() Failed <0x2ac6424a5b40>
Return code: 1
3 03/06/08 15:14:53 34 (spawning-device) Device died... count=1/50 dev=34
Thu Mar 6 15:14:53 CST 2008 died
========== NEW LOG SECTION ==========
1 03/06/08 15:15:03 34 (spawning-device) Starting... 2
1 03/06/08 15:15:03 34 (spawning-device) Found /usr/pluto/bin/ZWave
05 03/06/08 15:15:05.455 Child device 35 is disabled <0x2b36d4408b40>
05 03/06/08 15:16:48.741 Got a reload command from 0 <0x43005950>
05 03/06/08 15:16:49.446 void ClientSocket::Disconnect() on this socket: 0x666b40 (m_Socket: 7) <0x2b36d4408b40>
Return code: 2
2 03/06/08 15:16:49 34 (spawning-device) Device requests restart... count=2/50 dev=34
Thu Mar 6 15:16:49 CST 2008 Restart
========== NEW LOG SECTION ==========
1 03/06/08 15:16:57 34 (spawning-device) Starting... 2
1 03/06/08 15:16:57 34 (spawning-device) Found /usr/pluto/bin/ZWave
05 03/06/08 15:17:03.060 ### Go to timeout queue <0x41802950>
05 03/06/08 15:17:03.060 ### execute the next job from timeout queue <0x41802950>
05 03/06/08 15:17:03.060 ZWJobInitialize::timeoutHandler <0x41802950>
05 03/06/08 15:17:04.881 Creating child 35 <0x2ae0a8e84b40>
05 03/06/08 15:17:04.881 Note: Device manager has attached a device of type 1820 that this has no custom event handler for. It will not fire events. <0x2ae0a8e84b40>
05 03/06/08 15:17:04.881 Note: Device manager has attached a device of type 1820 that this has no custom handler for. This is normal for IR. <0x2ae0a8e84b40>
05 03/06/08 15:20:30.034 -------------------------- Job Timeout _________ <0x41802950>
-
Applying the patch that Daniel gave me, I had a failed hunk, but went ahead and tried to finish it out anyway, however: "make all" results in this:
dcerouter_64258:/home/linuxmce/source/trunk/src/ZWave# make all
g++ -c -I.. -I../DCE -DKDE_LMCE -DDEBUG -DTHREAD_LOG -DLOG_ALL_QUERIES -I/opt/libxine1-pluto/include -I/opt/linphone-1.3.5/include -I/usr/include/mysql -Wall -fPIC -ggdb3 Main.cpp -o Main.o
In file included from ../db_wrapper/db_wrapper.h:112,
from ../PlutoUtils/DBHelper.h:23,
from ../pluto_main/Database_pluto_main.h:3,
from ../pluto_main/Table_Device.h:21,
from ../DCE/DeviceData_Router.h:25,
from ../DCE/DCERouter.h:28,
from Main.cpp:8:
../db_wrapper/db_wrapper_mysql.h:7:25: error: mysql/mysql.h: No such file or directory
../PlutoUtils/DBHelper.h:36: error: ISO C++ forbids declaration of ‘MYSQL_RES’ with no type
../PlutoUtils/DBHelper.h:36: error: expected ‘;’ before ‘*’ token
../PlutoUtils/DBHelper.h: In constructor ‘PlutoSqlResult::PlutoSqlResult()’:
../PlutoUtils/DBHelper.h:37: error: class ‘PlutoSqlResult’ does not have any field named ‘r’
../PlutoUtils/DBHelper.h: In member function ‘void PlutoSqlResult::ClearResults()’:
../PlutoUtils/DBHelper.h:44: error: ‘r’ was not declared in this scope
../PlutoUtils/DBHelper.h:46: error: ‘mysql_free_result’ was not declared in this scope
../PlutoUtils/DBHelper.h: At global scope:
../PlutoUtils/DBHelper.h:64: error: ISO C++ forbids declaration of ‘MYSQL’ with no type
../PlutoUtils/DBHelper.h:64: error: expected ‘;’ before ‘*’ token
../PlutoUtils/DBHelper.h:164: error: ‘MYSQL’ has not been declared
../PlutoUtils/DBHelper.h:180: error: ISO C++ forbids declaration of ‘MYSQL_RES’ with no type
../PlutoUtils/DBHelper.h:180: error: expected ‘;’ before ‘*’ token
../PlutoUtils/DBHelper.h:225: error: expected `;' before ‘int’
../PlutoUtils/DBHelper.h: In constructor ‘DBHelper::DBHelper()’:
../PlutoUtils/DBHelper.h:74: error: ‘m_pDB’ was not declared in this scope
../PlutoUtils/DBHelper.h: In constructor ‘DBHelper::DBHelper(std::string, std::string, std::string, std::string, int)’:
../PlutoUtils/DBHelper.h:97: error: ‘m_pDB’ was not declared in this scope
../PlutoUtils/DBHelper.h: In destructor ‘virtual DBHelper::~DBHelper()’:
../PlutoUtils/DBHelper.h:111: error: ‘m_pDB’ was not declared in this scope
../PlutoUtils/DBHelper.h:112: error: ‘mysql_close’ was not declared in this scope
../PlutoUtils/DBHelper.h:113: error: ‘m_pDB’ was not declared in this scope
../PlutoUtils/DBHelper.h: In member function ‘bool DBHelper::DBConnect(bool)’:
../PlutoUtils/DBHelper.h:133: error: ‘m_pDB’ was not declared in this scope
../PlutoUtils/DBHelper.h:137: error: ‘mysql_close’ was not declared in this scope
../PlutoUtils/DBHelper.h:140: error: ‘m_pDB’ was not declared in this scope
../PlutoUtils/DBHelper.h:142: error: ‘mysql_init’ was not declared in this scope
../PlutoUtils/DBHelper.h:151: error: ‘m_pDB’ was not declared in this scope
../PlutoUtils/DBHelper.h:151: error: ‘mysql_real_connect’ was not declared in this scope
../PlutoUtils/DBHelper.h:154: error: ‘mysql_error’ was not declared in this scope
../PlutoUtils/DBHelper.h: In member function ‘void DBHelper::SetConnection(int*)’:
../PlutoUtils/DBHelper.h:166: error: ‘m_pDB’ was not declared in this scope
../PlutoUtils/DBHelper.h: In member function ‘std::string DBHelper::md5(std::string)’:
../PlutoUtils/DBHelper.h:173: error: ‘MYSQL_ROW’ was not declared in this scope
../PlutoUtils/DBHelper.h:173: error: expected `;' before ‘row’
../PlutoUtils/DBHelper.h:174: error: ‘class PlutoSqlResult’ has no member named ‘r’
../PlutoUtils/DBHelper.h:174: error: ‘db_wrapper_query_result’ was not declared in this scope
../PlutoUtils/DBHelper.h:174: error: ‘row’ was not declared in this scope
../PlutoUtils/DBHelper.h:174: error: ‘class PlutoSqlResult’ has no member named ‘r’
../PlutoUtils/DBHelper.h:174: error: ‘mysql_fetch_row’ was not declared in this scope
../PlutoUtils/DBHelper.h:177: error: ‘row’ was not declared in this scope
../PlutoUtils/DBHelper.h: In member function ‘int DBHelper::threaded_db_wrapper_query(std::string, bool, bool)’:
../PlutoUtils/DBHelper.h:232: error: ‘m_pDB’ was not declared in this scope
../PlutoUtils/DBHelper.h:232: error: ‘mysql_query’ was not declared in this scope
../PlutoUtils/DBHelper.h:237: error: ‘mysql_error’ was not declared in this scope
../PlutoUtils/DBHelper.h:261: error: ‘m_pDB’ was not declared in this scope
../PlutoUtils/DBHelper.h:261: error: ‘mysql_affected_rows’ was not declared in this scope
../PlutoUtils/DBHelper.h: In member function ‘int DBHelper::threaded_db_wrapper_query_withID(std::string, bool)’:
../PlutoUtils/DBHelper.h:273: error: ‘m_pDB’ was not declared in this scope
../PlutoUtils/DBHelper.h:273: error: ‘mysql_query’ was not declared in this scope
../PlutoUtils/DBHelper.h:276: error: ‘mysql_error’ was not declared in this scope
../PlutoUtils/DBHelper.h:300: error: ‘m_pDB’ was not declared in this scope
../PlutoUtils/DBHelper.h:300: error: ‘mysql_insert_id’ was not declared in this scope
make: *** [Main.o] Error 1
-
Looks like you don't have mysql headers and libs:
>../db_wrapper/db_wrapper_mysql.h:7:25: error: mysql/mysql.h: No such file or directory
Install something like "libmysqlclient15-dev"
-
Beta 4 not working properly with HA22 seems that the system now loops in the wizard for lights when the stick is pluged in and is detected, also found that all lights will not hold names for the switches etc.. example i have wall switches and rename them according to what they control but under the admin page they revert back to dimmable switch every time the router is reloaded is there a way as i can turn of the pnp for the zwave and go back to the manual install of drivers and configuration because the pnp is not working right :(
Think im going back to Beta 3
-
Beta 4 not working properly with HA22 seems that the system now loops in the wizard for lights when the stick is pluged in and is detected, also found that all lights will not hold names for the switches etc.. example i have wall switches and rename them according to what they control but under the admin page they revert back to dimmable switch every time the router is reloaded is there a way as i can turn of the pnp for the zwave and go back to the manual install of drivers and configuration because the pnp is not working right :(
Think im going back to Beta 3
This is a 'known problem' with Beta4... you can get the fix from here http://wiki.linuxmce.org/index.php/KnownIssues_0710_Beta4 (http://wiki.linuxmce.org/index.php/KnownIssues_0710_Beta4)
Andrew
-
Gonna give it a try thanks feel alot better about B4 ;D :D
-
Get the driver
Check out the driver from the repository:
linuxmce@dcerouter:/tmp$ svn co http://svn.charonmedia.org/svn/vendor/spcp8x5
A spcp8x5/spcp8x5.c
A spcp8x5/Makefile
Checked out revision 1512.