LinuxMCE Forums

General => Developers => Topic started by: ddamron on December 31, 2007, 10:14:12 pm

Title: having problems with GSD Template
Post by: ddamron on December 31, 2007, 10:14:12 pm

Ok, I'm trying to test the Detection script..

I want to put the PLM on /dev/ttyS0 of my Fiire Station 1"

the system reports (on that MD) available serial ports: /dev/ttyS0

First, I can't seem to get it to add the detection script to the MD..

I have the detection script in /usr/pluto/pnp/88_InsteonPLM.sh chmod 755
I have modified the script to point to my template 1901..

I have rebuilt all image files for all my MD's, and the detection script is NOT in the image.. :(

When I try to the device manually, I select the room it's in, select the Fiire Station as the Controlled By..
then I get 'Cannot find Top parent' where the COM port is specified...

Title: Re: having problems with GSD Template
Post by: ddamron on December 31, 2007, 10:16:51 pm

Yet when I change the room to where my CORE is, and select the CORE in Controlled By, all is well...
I can then select the proper com port..