LinuxMCE Forums
General => Installation issues => Topic started by: maverick0815 on February 15, 2016, 09:19:24 pm
-
I found out, when I start my MD, I need to do a reload router after its booted up, otherwise the whole system slows down to a crawl. Videoplayback on either core or MD experiences frame drops, or jumps. UI becomes totally unresponsive.
Have you guys seen that too?
-
I very rarely restart the MD. One of the reasons can be that a couple of devices are now back up and running and need to do "stuff". I would look at DCERouter.log and see if anything pops out.
-
Well, so far I can show only this:
[33;1mThe target device 32 (routed to 32) has not registered.[0m <0xb60b1b40>
05 02/16/16 20:10:48.257 [33;1mThe target device 35 (routed to 35) has not registered.[0m <0xb60b1b40>
05 02/16/16 20:10:48.257 [33;1mThe target device 45 (routed to 45) has not registered.[0m <0xb60b1b40>
08 02/16/16 20:10:48.274 Received Message from 55 ([36;1mDisk Drive / Beamer[0m) to Media Plug-in(10), type 1 id 831 Command:[35;1mRefresh List of Online Devices[0m, retry none, parameters: <0xb2afeb40>
05 02/16/16 20:10:48.303 [33;1mSocket::ReceiveData 0xb5753a48 failed, bytes left 0 start: 738139 1: 0 1b: 0 2: 0 2b: 0 m_Socket: 79 Incoming_Conn Socket 79 ::ffff:127.0.0.1[0m <0x9b84cb40>
05 02/16/16 20:10:48.303 [33;1mSocket::ReceiveString2 ReceiveData failed m_Socket: -1 Incoming_Conn Socket 79 ::ffff:127.0.0.1[0m <0x9b84cb40>
05 02/16/16 20:10:48.303 [33;1mTCPIP: Closing connection to -1003 (Router Dev #0) 0xb5753a48 m_Socket: -1[0m <0x9b84cb40>
05 02/16/16 20:10:48.303 [33;1mRouter::RemoveAndDeleteSocket 0xb5753a48 -1003[0m <0x9b84cb40>
08 02/16/16 20:10:48.763 Received Message from 15 ([36;1mApp Server / TV-Set[0m) to 15 ([36;1mApp Server / TV-Set[0m), type 1 id 812 Command:[35;1mApplication Exited[0m, retry none, parameters: <0xb0afab40>
08 02/16/16 20:10:48.763 Parameter 227(PID): 23333 <0xb0afab40>
08 02/16/16 20:10:48.763 Parameter 228(Exit Code): 0 <0xb0afab40>
08 02/16/16 20:10:53.804 Received Message from 50 ([36;1mHAL / Beamer[0m) to General Info Plug-in(4), type 1 id 808 Command:[35;1mGet Unused Serial Ports[0m, retry none, parameters: <0x76febb40>
08 02/16/16 20:10:53.804 Parameter 2(PK_Device): 50 <0x76febb40>
08 02/16/16 20:10:53.804 Parameter 5(Value To Assign): <0x76febb40>
08 02/16/16 20:10:53.925 Received Message from 20 ([36;1mOnScreen Orbiter / TV-Set[0m) to 20 ([36;1mOnScreen Orbiter / TV-Set[0m), type 1 id 192 Command:[35;1mOn[0m, retry none, parameters: <0xab06bb40>
08 02/16/16 20:10:53.925 Parameter 21(Force): 1 <0xab06bb40>
08 02/16/16 20:10:53.925 Parameter 97(PK_Pipe): 0 <0xab06bb40>
08 02/16/16 20:10:53.925 Parameter 98(PK_Device_Pipes): <0xab06bb40>
08 02/16/16 20:10:53.927 Received Message from 20 ([36;1mOnScreen Orbiter / TV-Set[0m) to 10 ([36;1mMedia Plug-in / TV-Set[0m), type 1 id 43 Command:[35;1mMH Play Media[0m, retry none, parameters: <0x777ecb40>
08 02/16/16 20:10:53.927 Parameter 2(PK_Device): 29 <0x777ecb40>
08 02/16/16 20:10:53.927 Parameter 29(PK_MediaType): 1 <0x777ecb40>
08 02/16/16 20:10:53.927 Received Message from 20 ([36;1mOnScreen Orbiter / TV-Set[0m) to 19 ([36;1mThe core/hybrid / TV-Set[0m), type 1 id 192 Command:[35;1mOn[0m, retry none, parameters: <0xa405db40>
08 02/16/16 20:10:53.927 Parameter 21(Force): 1 <0xa405db40>
08 02/16/16 20:10:53.927 Parameter 97(PK_Pipe): 0 <0xa405db40>
08 02/16/16 20:10:53.927 Parameter 98(PK_Device_Pipes): <0xa405db40>
08 02/16/16 20:10:53.927 Parameter 125(Already processed): 1 <0xa405db40>
05 02/16/16 20:10:53.927 [33;1mThe target device 19 (routed to 19) has not registered.[0m <0xb60b1b40>
01 02/16/16 20:10:53.928 [31;1mTTTT Final Sort![0m <0x86021b40>
01 02/16/16 20:10:53.928 [31;1mTTTT Final Sort End![0m <0x86021b40>
01 02/16/16 20:10:53.928 [31;1mTTTT StartMedia - Main function start[0m <0x86021b40>
01 02/16/16 20:10:53.929 [31;1mTTTT StartMedia OutputZone begin.[0m <0x86021b40>
01 02/16/16 20:10:53.929 [31;1mdebug_stream_end MediaStream::MediaStream c1 1001/0xa364520 source 29[0m <0x86021b40>
01 02/16/16 20:10:53.929 [31;1mTTTT StartMedia OutputZone end.[0m <0x86021b40>
01 02/16/16 20:10:53.929 [31;1mTTTT StartMedia OutputZone - MediaStream - Begin[0m <0x86021b40>
05 02/16/16 20:10:53.929 [33;1mMediaStream::GetCurrentMediaFile - no file[0m <0x86021b40>
01 02/16/16 20:10:53.929 [31;1mTTTT StartMedia - OutputZone - MediaStream - end.[0m <0x86021b40>
01 02/16/16 20:10:53.929 [31;1mTTTT StartMedia pMediaStream Start[0m <0x86021b40>
01 02/16/16 20:10:53.929 [31;1mTTTT StartMedia - pMediaStream - LoadStreamAttributes begin[0m <0x86021b40>
05 02/16/16 20:10:53.930 [33;1mMediaStream::GetCurrentMediaFile - no file[0m <0x86021b40>
01 02/16/16 20:10:53.930 [31;1mTTTT StartMedia - pMediaStream - LoadStreamAttributes end[0m <0x86021b40>
07 02/16/16 20:10:53.930 Event #19 has no handlers <0xa1858b40>
07 02/16/16 20:10:53.930 Received Message from 10 ([36;1mMedia Plug-in / TV-Set[0m) to -1001 ([36;1munknown / [0m), type 2 id 19 Event:[32;1mWatching Media[0m, retry none, parameters: <0xa1858b40>
07 02/16/16 20:10:53.930 Parameter 27(PK_Room): 3 <0xa1858b40>
05 02/16/16 20:10:53.931 [33;1mMediaStream::GetCurrentMediaFile - no file[0m <0x86021b40>
05 02/16/16 20:10:53.931 [33;1mMedia_Plugin::CheckForAlternatePipes no destination for EA 1 TV-Set[0m <0x86021b40>
05 02/16/16 20:10:53.931 [33;1mMedia_Plugin::HandleOnOffs Also turning on MD and OSD[0m <0x86021b40>
05 02/16/16 20:10:53.931 [33;1mMediaStream::GetCurrentMediaFile - no file[0m <0x86021b40>
08 02/16/16 20:10:53.932 Received Message from 10 ([36;1mMedia Plug-in / TV-Set[0m) to 19 ([36;1mThe core/hybrid / TV-Set[0m), type 1 id 192 Command:[35;1mOn[0m, retry none, parameters: <0xa1858b40>
08 02/16/16 20:10:53.932 Parameter 97(PK_Pipe): 0 <0xa1858b40>
08 02/16/16 20:10:53.932 Parameter 98(PK_Device_Pipes): <0xa1858b40>
05 02/16/16 20:10:53.932 [33;1mThe target device 19 (routed to 19) has not registered.[0m <0xb60b1b40>
08 02/16/16 20:10:53.933 Received Message from 10 ([36;1mMedia Plug-in / TV-Set[0m) to 20 ([36;1mOnScreen Orbiter / TV-Set[0m), type 1 id 192 Command:[35;1mOn[0m, retry none, parameters: <0xa1858b40>
08 02/16/16 20:10:53.933 Parameter 97(PK_Pipe): 0 <0xa1858b40>
08 02/16/16 20:10:53.933 Parameter 98(PK_Device_Pipes): <0xa1858b40>
08 02/16/16 20:10:53.934 Received Message from 10 ([36;1mMedia Plug-in / TV-Set[0m) to 29 ([36;1mMythTV Player / TV-Set[0m), type 1 id 192 Command:[35;1mOn[0m, retry none, parameters: <0xa1858b40>
08 02/16/16 20:10:53.934 Parameter 97(PK_Pipe): 0 <0xa1858b40>
08 02/16/16 20:10:53.934 Parameter 98(PK_Device_Pipes): <0xa1858b40>
08 02/16/16 20:10:53.936 Received Message from 10 ([36;1mMedia Plug-in / TV-Set[0m) to 20 ([36;1mOnScreen Orbiter / TV-Set[0m), type 1 id 242 Command:[35;1mSet Now Playing[0m, retry none, parameters: <0xa1858b40>
08 02/16/16 20:10:53.936 Parameter 3(PK_DesignObj): 48,4898,47,128,224,242 <0xa1858b40>
08 02/16/16 20:10:53.936 Parameter 5(Value To Assign): Not available <0xa1858b40>
08 02/16/16 20:10:53.936 Parameter 9(Text): Not available <0xa1858b40>
08 02/16/16 20:10:53.936 Parameter 29(PK_MediaType): 1 <0xa1858b40>
08 02/16/16 20:10:53.936 Parameter 41(StreamID): 1001 <0xa1858b40>
08 02/16/16 20:10:53.936 Parameter 48(Value): 0 <0xa1858b40>
08 02/16/16 20:10:53.936 Parameter 50(Name): mythfrontend <0xa1858b40>
08 02/16/16 20:10:53.936 Parameter 103(List PK Device): 29,29,15,,1,1,0 <0xa1858b40>
08 02/16/16 20:10:53.936 Parameter 120(Retransmit): 0 <0xa1858b40>
08 02/16/16 20:10:53.931 Received Message from 28 ([36;1mMythTV Plug-In / TV-Set[0m) to 29 ([36;1mMythTV Player / TV-Set[0m), type 1 id 37 Command:[35;1mPlay Media[0m, retry none, parameters: <0x95840b40>
08 02/16/16 20:10:53.941 Parameter 29(PK_MediaType): 1 <0x95840b40>
08 02/16/16 20:10:53.941 Parameter 41(StreamID): 1001 <0x95840b40>
08 02/16/16 20:10:53.941 Parameter 42(MediaPosition): <0x95840b40>
08 02/16/16 20:10:53.941 Parameter 59(MediaURL): <0x95840b40>
08 02/16/16 20:10:53.964 Received Message from 20 ([36;1mOnScreen Orbiter / TV-Set[0m) to 24 ([36;1mPhoto Screen Saver / TV-Set[0m), type 1 id 193 Command:[35;1mOff[0m, retry none, parameters: <0x777ecb40>
08 02/16/16 20:10:53.964 Parameter 97(PK_Pipe): 0 <0x777ecb40>
05 02/16/16 20:10:53.982 [33;1mMedia_Plugin::StartMedia() function call completed with honors![0m <0x86021b40>
01 02/16/16 20:10:53.982 [31;1mTTTT StartMedia - pMediaStream - end.[0m <0x86021b40>
01 02/16/16 20:10:53.982 [31;1mTTTT StartMedia main constructor end.[0m <0x86021b40>
08 02/16/16 20:10:53.983 Received Message from 10 ([36;1mMedia Plug-in / TV-Set[0m) to 20 ([36;1mOnScreen Orbiter / TV-Set[0m), type 1 id 741 Command:[35;1mGoto Screen[0m, retry none, parameters: <0xa1858b40>
08 02/16/16 20:10:53.983 Parameter 10(ID): <0xa1858b40>
08 02/16/16 20:10:53.983 Parameter 159(PK_Screen): 128 <0xa1858b40>
08 02/16/16 20:10:53.983 Parameter 251(Interruption): 0 <0xa1858b40>
08 02/16/16 20:10:53.983 Parameter 252(Turn On): 1 <0xa1858b40>
08 02/16/16 20:10:53.983 Parameter 253(Queue): 0 <0xa1858b40>
08 02/16/16 20:10:53.989 Received Message from 29 ([36;1mMythTV Player / TV-Set[0m) to 15 ([36;1mApp Server / TV-Set[0m), type 1 id 67 Command:[35;1mSpawn Application[0m, retry none, parameters: <0x7c80eb40>
08 02/16/16 20:10:53.990 Parameter 13(Filename): /usr/bin/mythfrontend <0x7c80eb40>
08 02/16/16 20:10:53.990 Parameter 50(Name): mythfrontend <0x7c80eb40>
08 02/16/16 20:10:53.990 Parameter 51(Arguments): -w -geometry 1920x1080 <0x7c80eb40>
08 02/16/16 20:10:53.990 Parameter 94(SendOnFailure): 29 29 1 812 228 1 <0x7c80eb40>
08 02/16/16 20:10:53.990 Parameter 95(SendOnSuccess): 29 29 1 812 228 0 <0x7c80eb40>
08 02/16/16 20:10:53.990 Parameter 115(Show logo): 0 <0x7c80eb40>
08 02/16/16 20:10:53.990 Parameter 120(Retransmit): 0 <0x7c80eb40>
08 02/16/16 20:10:53.990 Parameter 126(Exclusive): 1 <0x7c80eb40>
08 02/16/16 20:10:53.990 Parameter 241(Detach): 0 <0x7c80eb40>
08 02/16/16 20:10:53.997 Received Message from 20 ([36;1mOnScreen Orbiter / TV-Set[0m) to 10 ([36;1mMedia Plug-in / TV-Set[0m), type 1 id 74 Command:[35;1mBind to Media Remote[0m, retry none, parameters: <0x777ecb40>
08 02/16/16 20:10:53.997 Parameter 2(PK_Device): <0x777ecb40>
08 02/16/16 20:10:53.997 Parameter 3(PK_DesignObj): <0x777ecb40>
08 02/16/16 20:10:53.997 Parameter 8(On/Off): 1 <0x777ecb40>
08 02/16/16 20:10:53.997 Parameter 25(PK_Text): <0x777ecb40>
08 02/16/16 20:10:53.997 Parameter 39(Options): <0x777ecb40>
08 02/16/16 20:10:53.997 Parameter 45(PK_EntertainArea): 1 <0x777ecb40>
08 02/16/16 20:10:53.997 Parameter 63(PK_Text_Synopsis): <0x777ecb40>
08 02/16/16 20:10:53.997 Parameter 159(PK_Screen): 128 <0x777ecb40>
05 02/16/16 20:10:53.998 [33;1mBoundRemote::UpdateOrbiter(): Updating object: on device 20 with size of 0[0m <0x86021b40>
08 02/16/16 20:10:54.016 Received Message from 16 ([36;1mHAL / TV-Set[0m) to General Info Plug-in(4), type 1 id 808 Command:[35;1mGet Unused Serial Ports[0m, retry none, parameters: <0x707deb40>
08 02/16/16 20:10:54.016 Parameter 2(PK_Device): 16 <0x707deb40>
08 02/16/16 20:10:54.017 Parameter 5(Value To Assign): <0x707deb40>
08 02/16/16 20:10:54.019 Received Message from 10 ([36;1mMedia Plug-in / TV-Set[0m) to 20 ([36;1mOnScreen Orbiter / TV-Set[0m), type 1 id 242 Command:[35;1mSet Now Playing[0m, retry none, parameters: <0xa1858b40>
08 02/16/16 20:10:54.020 Parameter 3(PK_DesignObj): 48,4898,47,128,224,242 <0xa1858b40>
08 02/16/16 20:10:54.020 Parameter 5(Value To Assign): Not available <0xa1858b40>
08 02/16/16 20:10:54.020 Parameter 9(Text): Not available <0xa1858b40>
08 02/16/16 20:10:54.020 Parameter 29(PK_MediaType): 1 <0xa1858b40>
08 02/16/16 20:10:54.020 Parameter 41(StreamID): 1001 <0xa1858b40>
08 02/16/16 20:10:54.020 Parameter 48(Value): 0 <0xa1858b40>
08 02/16/16 20:10:54.020 Parameter 50(Name): mythfrontend <0xa1858b40>
08 02/16/16 20:10:54.020 Parameter 103(List PK Device): 29,29,15,,1,1,0 <0xa1858b40>
08 02/16/16 20:10:54.020 Parameter 120(Retransmit): 0 <0xa1858b40>
08 02/16/16 20:10:54.028 Received Message from 29 ([36;1mMythTV Player / TV-Set[0m) to 28 ([36;1mMythTV Plug-In / TV-Set[0m), type 1 id 764 Command:[35;1mSet Active Menu[0m, retry none, parameters: <0x7c80eb40>
08 02/16/16 20:10:54.028 Parameter 9(Text): live <0x7c80eb40>
08 02/16/16 20:10:54.044 Received Message from 15 ([36;1mApp Server / TV-Set[0m) to 15 ([36;1mApp Server / TV-Set[0m), type 1 id 812 Command:[35;1mApplication Exited[0m, retry none, parameters: <0xb0afab40>
08 02/16/16 20:10:54.044 Parameter 227(PID): 25002 <0xb0afab40>
08 02/16/16 20:10:54.044 Parameter 228(Exit Code): 0 <0xb0afab40>
08 02/16/16 20:10:54.045 Received Message from 29 ([36;1mMythTV Player / TV-Set[0m) to 29 ([36;1mMythTV Player / TV-Set[0m), type 1 id 812 Command:[35;1mApplication Exited[0m, retry none, parameters: <0xb0afab40>
08 02/16/16 20:10:54.045 Parameter 228(Exit Code): 0 <0xb0afab40>
08 02/16/16 20:10:54.045 Parameter 242(Comment): App_Server::SendMessageList <0xb0afab40>
08 02/16/16 20:10:54.046 Received Message from 29 ([36;1mMythTV Player / TV-Set[0m) to Media Plug-in(10), type 1 id 44 Command:[35;1mMH Stop Media[0m, retry none, parameters: <0x7c80eb40>
08 02/16/16 20:10:54.046 Parameter 2(PK_Device): 29 <0x7c80eb40>
08 02/16/16 20:10:54.046 Parameter 29(PK_MediaType): 0 <0x7c80eb40>
08 02/16/16 20:10:54.046 Parameter 44(PK_DeviceTemplate): 0 <0x7c80eb40>
08 02/16/16 20:10:54.046 Parameter 45(PK_EntertainArea): <0x7c80eb40>
08 02/16/16 20:10:54.046 Parameter 254(Bypass Event): 0 <0x7c80eb40>
08 02/16/16 20:10:54.492 Received Message from 20 ([36;1mOnScreen Orbiter / TV-Set[0m) to 24 ([36;1mPhoto Screen Saver / TV-Set[0m), type 1 id 193 Command:[35;1mOff[0m, retry none, parameters: <0x777ecb40>
08 02/16/16 20:10:54.492 Parameter 97(PK_Pipe): 0 <0x777ecb40>
05 02/16/16 20:10:55.019 [33;1mConnect() failed, Error Code 111 (Connection refused))[0m <0x9403db40>
05 02/16/16 20:10:56.020 [33;1mConnect() failed, Error Code 111 (Connection refused))[0m <0x9403db40>
05 02/16/16 20:10:57.021 [33;1mConnect() failed, Error Code 111 (Connection refused))[0m <0x9403db40>
05 02/16/16 20:10:57.021 [33;1mClientSocket::Connect() not successful[0m <0x9403db40>
05 02/16/16 20:10:57.021 [33;1mvoid ClientSocket::Disconnect() on this socket: 0xb3301940 (m_Socket: 79)[0m <0x9403db40>
01 02/16/16 20:10:57.021 [31;1mMythBackEnd_Socket::Close[0m <0x9403db40>
01 02/16/16 20:10:57.021 [31;1mMythBackEnd_Socket::Connect failed m_bConnected=false[0m <0x9403db40>
01 02/16/16 20:10:57.021 [31;1mMythBackEnd_Socket::ProcessSocket error reconnect 0[0m <0x9403db40>
05 02/16/16 20:10:58.023 [33;1mConnect() failed, Error Code 111 (Connection refused))[0m <0x9403db40>
05 02/16/16 20:10:59.023 [33;1mConnect() failed, Error Code 111 (Connection refused))[0m <0x9403db40>
05 02/16/16 20:11:00.024 [33;1mConnect() failed, Error Code 111 (Connection refused))[0m <0x9403db40>
05 02/16/16 20:11:00.024 [33;1mClientSocket::Connect() not successful[0m <0x9403db40>
05 02/16/16 20:11:00.024 [33;1mvoid ClientSocket::Disconnect() on this socket: 0xb3301d30 (m_Socket: 79)[0m <0x9403db40>
01 02/16/16 20:11:00.024 [31;1mMythBackEnd_Socket::Close[0m <0x9403db40>
01 02/16/16 20:11:00.024 [31;1mMythBackEnd_Socket::Connect failed m_bConnected=false[0m <0x9403db40>
05 02/16/16 20:11:01.025 [33;1mConnect() failed, Error Code 111 (Connection refused))[0m <0x9403db40>
05 02/16/16 20:11:02.026 [33;1mConnect() failed, Error Code 111 (Connection refused))[0m <0x9403db40>
05 02/16/16 20:11:03.027 [33;1mConnect() failed, Error Code 111 (Connection refused))[0m <0x9403db40>
05 02/16/16 20:11:03.027 [33;1mClientSocket::Connect() not successful[0m <0x9403db40>
05 02/16/16 20:11:03.027 [33;1mvoid ClientSocket::Disconnect() on this socket: 0xb3301bd0 (m_Socket: 79)[0m <0x9403db40>
01 02/16/16 20:11:03.027 [31;1mMythBackEnd_Socket::Close[0m <0x9403db40>
01 02/16/16 20:11:03.027 [31;1mMythBackEnd_Socket::Connect failed m_bConnected=false[0m <0x9403db40>
01 02/16/16 20:11:03.027 [31;1mMythBackEnd_Socket::SendMythString failed to reconnect[0m <0x9403db40>
01 02/16/16 20:11:03.027 [31;1mMythTV_PlugIn::ConfirmMasterBackendOk -- lost communication with it. Forcing it to die[0m <0x9403db40>
08 02/16/16 20:11:03.028 Received Message from 28 ([36;1mMythTV Plug-In / TV-Set[0m) to 15 ([36;1mApp Server / TV-Set[0m), type 1 id 67 Command:[35;1mSpawn Application[0m, retry none, parameters: <0x95840b40>
08 02/16/16 20:11:03.028 Parameter 13(Filename): /usr/pluto/bin/ForciblyKillProcess.sh <0x95840b40>
08 02/16/16 20:11:03.028 Parameter 50(Name): killmyth <0x95840b40>
08 02/16/16 20:11:03.028 Parameter 51(Arguments): mythbackend <0x95840b40>
08 02/16/16 20:11:03.028 Parameter 94(SendOnFailure): <0x95840b40>
08 02/16/16 20:11:03.028 Parameter 95(SendOnSuccess): <0x95840b40>
08 02/16/16 20:11:03.028 Parameter 115(Show logo): 0 <0x95840b40>
08 02/16/16 20:11:03.028 Parameter 120(Retransmit): 0 <0x95840b40>
08 02/16/16 20:11:03.028 Parameter 126(Exclusive): 0 <0x95840b40>
08 02/16/16 20:11:03.028 Parameter 241(Detach): 1 <0x95840b40>
08 02/16/16 20:11:03.029 Received Message from 28 ([36;1mMythTV Plug-In / TV-Set[0m) to 20 ([36;1mOnScreen Orbiter / TV-Set[0m), type 1 id 741 Command:[35;1mGoto Screen[0m, retry none, parameters: <0x95840b40>
08 02/16/16 20:11:03.029 Parameter 159(PK_Screen): 185 <0x95840b40>
08 02/16/16 20:11:03.029 Parameter 163(Description): MythTV seems to have died. I'm trying to reset it now. If you do not see tv, try stopping the tv and restarting it. If you still have problems, you may need to reboot. <0x95840b40>
08 02/16/16 20:11:03.029 Parameter 181(PromptToResetRouter): 0 <0x95840b40>
08 02/16/16 20:11:03.029 Parameter 182(Timeout): 20000 <0x95840b40>
08 02/16/16 20:11:03.029 Parameter 183(CannotGoBack): 1 <0x95840b40>
08 02/16/16 20:11:03.030 Parameter 251(Interruption): 0 <0x95840b40>
08 02/16/16 20:11:03.030 Parameter 252(Turn On): 0 <0x95840b40>
08 02/16/16 20:11:03.030 Parameter 253(Queue): 0 <0x95840b40>
08 02/16/16 20:11:03.037 Received Message from 10 ([36;1mMedia Plug-in / TV-Set[0m) to 20 ([36;1mOnScreen Orbiter / TV-Set[0m), type 1 id 242 Command:[35;1mSet Now Playing[0m, retry none, parameters: <0xa1858b40>
08 02/16/16 20:11:03.037 Parameter 3(PK_DesignObj): 48,4898,47,128,224,242 <0xa1858b40>
08 02/16/16 20:11:03.037 Parameter 5(Value To Assign): Not available <0xa1858b40>
08 02/16/16 20:11:03.037 Parameter 9(Text): Not available <0xa1858b40>
08 02/16/16 20:11:03.037 Parameter 29(PK_MediaType): 1 <0xa1858b40>
08 02/16/16 20:11:03.037 Parameter 41(StreamID): 1001 <0xa1858b40>
08 02/16/16 20:11:03.037 Parameter 48(Value): 0 <0xa1858b40>
08 02/16/16 20:11:03.037 Parameter 50(Name): mythfrontend <0xa1858b40>
08 02/16/16 20:11:03.037 Parameter 103(List PK Device): 29,29,15,,1,1,0 <0xa1858b40>
08 02/16/16 20:11:03.037 Parameter 120(Retransmit): 0 <0xa1858b40>
08 02/16/16 20:11:03.037 Received Message from 10 ([36;1mMedia Plug-in / TV-Set[0m) to 20 ([36;1mOnScreen Orbiter / TV-Set[0m), type 1 id 741 Command:[35;1mGoto Screen[0m, retry none, parameters: <0xa1858b40>
08 02/16/16 20:11:03.037 Parameter 10(ID): <0xa1858b40>
08 02/16/16 20:11:03.037 Parameter 159(PK_Screen): 128 <0xa1858b40>
08 02/16/16 20:11:03.037 Parameter 251(Interruption): 0 <0xa1858b40>
08 02/16/16 20:11:03.037 Parameter 252(Turn On): 1 <0xa1858b40>
08 02/16/16 20:11:03.037 Parameter 253(Queue): 0 <0xa1858b40>
08 02/16/16 20:11:03.039 Received Message from 28 ([36;1mMythTV Plug-In / TV-Set[0m) to 29 ([36;1mMythTV Player / TV-Set[0m), type 1 id 38 Command:[35;1mStop Media[0m, retry none, parameters: <0x9503fb40>
08 02/16/16 20:11:03.039 Parameter 41(StreamID): 0 <0x9503fb40>
08 02/16/16 20:11:03.039 Parameter 42(MediaPosition): <0x9503fb40>
08 02/16/16 20:11:03.045 Received Message from 20 ([36;1mOnScreen Orbiter / TV-Set[0m) to 10 ([36;1mMedia Plug-in / TV-Set[0m), type 1 id 74 Command:[35;1mBind to Media Remote[0m, retry none, parameters: <0x777ecb40>
08 02/16/16 20:11:03.045 Parameter 2(PK_Device): <0x777ecb40>
08 02/16/16 20:11:03.045 Parameter 3(PK_DesignObj): <0x777ecb40>
08 02/16/16 20:11:03.045 Parameter 8(On/Off): 0 <0x777ecb40>
08 02/16/16 20:11:03.045 Parameter 25(PK_Text): <0x777ecb40>
08 02/16/16 20:11:03.045 Parameter 39(Options): <0x777ecb40>
08 02/16/16 20:11:03.045 Parameter 45(PK_EntertainArea): 1 <0x777ecb40>
08 02/16/16 20:11:03.045 Parameter 63(PK_Text_Synopsis): <0x777ecb40>
08 02/16/16 20:11:03.045 Parameter 159(PK_Screen): <0x777ecb40>
08 02/16/16 20:11:03.052 Received Message from 15 ([36;1mApp Server / TV-Set[0m) to 15 ([36;1mApp Server / TV-Set[0m), type 1 id 812 Command:[35;1mApplication Exited[0m, retry none, parameters: <0xb0afab40>
08 02/16/16 20:11:03.052 Parameter 227(PID): 25019 <0xb0afab40>
08 02/16/16 20:11:03.052 Parameter 228(Exit Code): 0 <0xb0afab40>
08 02/16/16 20:11:03.853 Received Message from 29 ([36;1mMythTV Player / TV-Set[0m) to 15 ([36;1mApp Server / TV-Set[0m), type 1 id 69 Command:[35;1mKill Application[0m, retry none, parameters: <0x68fcfb40>
08 02/16/16 20:11:03.853 Parameter 50(Name): mythfrontend <0x68fcfb40>
08 02/16/16 20:11:03.853 Parameter 120(Retransmit): 0 <0x68fcfb40>
05 02/16/16 20:11:04.034 [33;1mConnect() failed, Error Code 111 (Connection refused))[0m <0x9483eb40>
01 02/16/16 20:11:04.856 [31;1mdebug_stream_end Media_Plugin::StreamEnded ID 1001/0xa364520 delete 1 auto resume 0 resume: [0m <0x86021b40>
05 02/16/16 20:11:04.856 [33;1mMediaStream::GetCurrentMediaFile - no file[0m <0x86021b40>
01 02/16/16 20:11:04.856 [31;1mdebug_stream_end MediaStream::~MediaStream c1 1001/0xa364520[0m <0x86021b40>
07 02/16/16 20:11:04.857 Event #20 has no handlers <0xa1858b40>
07 02/16/16 20:11:04.857 Received Message from 10 ([36;1mMedia Plug-in / TV-Set[0m) to -1001 ([36;1munknown / [0m), type 2 id 20 Event:[32;1mStopped Watching Media[0m, retry none, parameters: <0xa1858b40>
07 02/16/16 20:11:04.857 Parameter 27(PK_Room): 3 <0xa1858b40>
08 02/16/16 20:11:04.859 Received Message from 10 ([36;1mMedia Plug-in / TV-Set[0m) to 20 ([36;1mOnScreen Orbiter / TV-Set[0m), type 1 id 242 Command:[35;1mSet Now Playing[0m, retry none, parameters: <0xa1858b40>
08 02/16/16 20:11:04.859 Parameter 3(PK_DesignObj): <0xa1858b40>
08 02/16/16 20:11:04.859 Parameter 5(Value To Assign): <0xa1858b40>
08 02/16/16 20:11:04.859 Parameter 9(Text): <0xa1858b40>
08 02/16/16 20:11:04.859 Parameter 29(PK_MediaType): 0 <0xa1858b40>
08 02/16/16 20:11:04.859 Parameter 41(StreamID): 0 <0xa1858b40>
08 02/16/16 20:11:04.859 Parameter 48(Value): 0 <0xa1858b40>
08 02/16/16 20:11:04.859 Parameter 50(Name): <0xa1858b40>
08 02/16/16 20:11:04.859 Parameter 103(List PK Device): <0xa1858b40>
08 02/16/16 20:11:04.859 Parameter 120(Retransmit): 0 <0xa1858b40>
08 02/16/16 20:11:04.860 Received Message from 10 ([36;1mMedia Plug-in / TV-Set[0m) to 20 ([36;1mOnScreen Orbiter / TV-Set[0m), type 1 id 741 Command:[35;1mGoto Screen[0m, retry none, parameters: <0xa1858b40>
08 02/16/16 20:11:04.860 Parameter 159(PK_Screen): 1 <0xa1858b40>
08 02/16/16 20:11:04.860 Parameter 195(Location): <%=L%> <0xa1858b40>
08 02/16/16 20:11:04.860 Parameter 251(Interruption): 0 <0xa1858b40>
08 02/16/16 20:11:04.860 Parameter 252(Turn On): 0 <0xa1858b40>
08 02/16/16 20:11:04.860 Parameter 253(Queue): 0 <0xa1858b40>
08 02/16/16 20:11:04.861 Received Message from 20 ([36;1mOnScreen Orbiter / TV-Set[0m) to 10 ([36;1mMedia Plug-in / TV-Set[0m), type 1 id 74 Command:[35;1mBind to Media Remote[0m, retry none, parameters: <0x777ecb40>
08 02/16/16 20:11:04.861 Parameter 2(PK_Device): <0x777ecb40>
08 02/16/16 20:11:04.861 Parameter 3(PK_DesignObj): <0x777ecb40>
08 02/16/16 20:11:04.861 Parameter 8(On/Off): 1 <0x777ecb40>
08 02/16/16 20:11:04.861 Parameter 25(PK_Text): <0x777ecb40>
08 02/16/16 20:11:04.861 Parameter 39(Options): <0x777ecb40>
08 02/16/16 20:11:04.861 Parameter 45(PK_EntertainArea): 1 <0x777ecb40>
08 02/16/16 20:11:04.861 Parameter 63(PK_Text_Synopsis): <0x777ecb40>
08 02/16/16 20:11:04.861 Parameter 159(PK_Screen): 128 <0x777ecb40>
05 02/16/16 20:11:04.863 [33;1mAttempt to bind to a remote in an entertainment area with no media stream[0m <0x86021b40>
08 02/16/16 20:11:04.863 Received Message from 10 ([36;1mMedia Plug-in / TV-Set[0m) to 29 ([36;1mMythTV Player / TV-Set[0m), type 1 id 193 Command:[35;1mOff[0m, retry none, parameters: <0xa1858b40>
08 02/16/16 20:11:04.863 Parameter 97(PK_Pipe): -1 <0xa1858b40>
08 02/16/16 20:11:04.864 Received Message from 10 ([36;1mMedia Plug-in / TV-Set[0m) to 19 ([36;1mThe core/hybrid / TV-Set[0m), type 1 id 192 Command:[35;1mOn[0m, retry none, parameters: <0xa1858b40>
08 02/16/16 20:11:04.864 Parameter 97(PK_Pipe): 0 <0xa1858b40>
08 02/16/16 20:11:04.864 Parameter 98(PK_Device_Pipes): <0xa1858b40>
05 02/16/16 20:11:04.864 [33;1mThe target device 19 (routed to 19) has not registered.[0m <0xb60b1b40>
08 02/16/16 20:11:04.865 Received Message from 10 ([36;1mMedia Plug-in / TV-Set[0m) to 20 ([36;1mOnScreen Orbiter / TV-Set[0m), type 1 id 242 Command:[35;1mSet Now Playing[0m, retry none, parameters: <0xa1858b40>
08 02/16/16 20:11:04.865 Parameter 3(PK_DesignObj): <0xa1858b40>
08 02/16/16 20:11:04.865 Parameter 5(Value To Assign): <0xa1858b40>
08 02/16/16 20:11:04.865 Parameter 9(Text): <0xa1858b40>
08 02/16/16 20:11:04.865 Parameter 29(PK_MediaType): 0 <0xa1858b40>
08 02/16/16 20:11:04.865 Parameter 41(StreamID): 0 <0xa1858b40>
08 02/16/16 20:11:04.865 Parameter 48(Value): 0 <0xa1858b40>
08 02/16/16 20:11:04.865 Parameter 50(Name): <0xa1858b40>
08 02/16/16 20:11:04.865 Parameter 103(List PK Device): <0xa1858b40>
08 02/16/16 20:11:04.865 Parameter 120(Retransmit): 1 <0xa1858b40>
08 02/16/16 20:11:04.915 Received Message from 20 ([36;1mOnScreen Orbiter / TV-Set[0m) to 10 ([36;1mMedia Plug-in / TV-Set[0m), type 1 id 74 Command:[35;1mBind to Media Remote[0m, retry none, parameters: <0x777ecb40>
08 02/16/16 20:11:04.915 Parameter 2(PK_Device): <0x777ecb40>
08 02/16/16 20:11:04.915 Parameter 3(PK_DesignObj): <0x777ecb40>
08 02/16/16 20:11:04.915 Parameter 8(On/Off): 0 <0x777ecb40>
08 02/16/16 20:11:04.915 Parameter 25(PK_Text): <0x777ecb40>
08 02/16/16 20:11:04.915 Parameter 39(Options): <0x777ecb40>
08 02/16/16 20:11:04.915 Parameter 45(PK_EntertainArea): 1 <0x777ecb40>
08 02/16/16 20:11:04.915 Parameter 63(PK_Text_Synopsis): <0x777ecb40>
08 02/16/16 20:11:04.915 Parameter 159(PK_Screen): <0x777ecb40>
05 02/16/16 20:11:05.036 [33;1mConnect() failed, Error Code 111 (Connection refused))[0m <0x9483eb40>
08 02/16/16 20:11:05.132 Received Message from 20 ([36;1mOnScreen Orbiter / TV-Set[0m) to 24 ([36;1mPhoto Screen Saver / TV-Set[0m), type 1 id 192 Command:[35;1mOn[0m, retry none, parameters: <0x777ecb40>
08 02/16/16 20:11:05.132 Parameter 97(PK_Pipe): 0 <0x777ecb40>
08 02/16/16 20:11:05.132 Parameter 98(PK_Device_Pipes): <0x777ecb40>
05 02/16/16 20:11:06.037 [33;1mConnect() failed, Error Code 111 (Connection refused))[0m <0x9483eb40>
05 02/16/16 20:11:06.037 [33;1mClientSocket::Connect() not successful[0m <0x9483eb40>
05 02/16/16 20:11:06.037 [33;1mvoid ClientSocket::Disconnect() on this socket: 0xa3611e8 (m_Socket: 79)[0m <0x9483eb40>
01 02/16/16 20:11:06.037 [31;1mMythBackEnd_Socket::Close[0m <0x9483eb40>
01 02/16/16 20:11:06.037 [31;1mMythBackEnd_Socket::Connect failed m_bConnected=false[0m <0x9483eb40>
05 02/16/16 20:11:07.039 [33;1mConnect() failed, Error Code 111 (Connection refused))[0m <0x9483eb40>
05 02/16/16 20:11:08.040 [33;1mConnect() failed, Error Code 111 (Connection refused))[0m <0x9483eb40>
01 02/16/16 20:11:08.040 [31;1mTTTT UpdateAttributeCache begin[0m <0x9e051b40>
01 02/16/16 20:11:08.195 [31;1mTTTT UpdateAttributeCache end[0m <0x9e051b40>
05 02/16/16 20:11:09.041 [33;1mConnect() failed, Error Code 111 (Connection refused))[0m <0x9483eb40>
05 02/16/16 20:11:09.041 [33;1mClientSocket::Connect() not successful[0m <0x9483eb40>
05 02/16/16 20:11:09.041 [33;1mvoid ClientSocket::Disconnect() on this socket: 0xa148758 (m_Socket: 79)[0m <0x9483eb40>
01 02/16/16 20:11:09.041 [31;1mMythBackEnd_Socket::Close[0m <0x9483eb40>
01 02/16/16 20:11:09.041 [31;1mMythBackEnd_Socket::Connect failed m_bConnected=false[0m <0x9483eb40>
01 02/16/16 20:11:09.042 [31;1mMythBackEnd_Socket::SendMythString failed to reconnect[0m <0x9483eb40>
01 02/16/16 20:11:09.042 [31;1mMythTV_PlugIn::UpdateUpcomingRecordings no recordings[0m <0x9483eb40>
08 02/16/16 20:11:09.072 Received Message from 48 ([36;1mOnScreen Orbiter / Beamer[0m) to 52 ([36;1mPhoto Screen Saver / Beamer[0m), type 1 id 192 Command:[35;1mOn[0m, retry none, parameters: <0x6c7d6b40>
08 02/16/16 20:11:09.072 Parameter 97(PK_Pipe): 0 <0x6c7d6b40>
08 02/16/16 20:11:09.072 Parameter 98(PK_Device_Pipes): <0x6c7d6b40>
05 02/16/16 20:11:10.092 [33;1mMythTV_PlugIn::CheckForNewRecordings couldn't locate file 1.82 TB (sdc3) ST2000DL004_HD2 [39][0m <0x9403db40>
05 02/16/16 20:11:10.092 [33;1mMythTV_PlugIn::CheckForNewRecordings couldn't locate file 1.82 TB (sdb1) SAMSUNG_HD204UI [38][0m <0x9403db40>
05 02/16/16 20:11:10.092 [33;1mMythTV_PlugIn::CheckForNewRecordings couldn't locate file 1.82 TB (sdc3) ST2000DL004_HD2 [39][0m <0x9403db40>
05 02/16/16 20:11:10.092 [33;1mMythTV_PlugIn::CheckForNewRecordings couldn't locate file 1.82 TB (sdb1) SAMSUNG_HD204UI [38][0m <0x9403db40>
05 02/16/16 20:11:10.093 [33;1mMythTV_PlugIn::CheckForNewRecordings couldn't locate file 1.82 TB (sdb1) SAMSUNG_HD204UI [36][0m <0x9403db40>
05 02/16/16 20:11:10.093 [33;1mMythTV_PlugIn::CheckForNewRecordings couldn't locate file 1.82 TB (sdc3) ST2000DL004_HD2 [39][0m <0x9403db40>
05 02/16/16 20:11:10.093 [33;1mMythTV_PlugIn::CheckForNewRecordings couldn't locate file 1.82 TB (sdb1) SAMSUNG_HD204UI [38][0m <0x9403db40>
05 02/16/16 20:11:10.094 [33;1mMythTV_PlugIn::CheckForNewRecordings couldn't locate file Windows Share-Public [31][0m <0x9403db40>
08 02/16/16 20:11:25.002 Received Message from 28 ([36;1mMythTV Plug-In / TV-Set[0m) to 15 ([36;1mApp Server / TV-Set[0m), type 1 id 67 Command:[35;1mSpawn Application[0m, retry none, parameters: <0x95840b40>
08 02/16/16 20:11:25.002 Parameter 13(Filename): /usr/pluto/bin/MythTvSyncDB.sh <0x95840b40>
08 02/16/16 20:11:25.002 Parameter 50(Name): mythtv_sync_db_master <0x95840b40>
08 02/16/16 20:11:25.002 Parameter 51(Arguments): master 192.168.80.1 <0x95840b40>
08 02/16/16 20:11:25.002 Parameter 94(SendOnFailure): <0x95840b40>
08 02/16/16 20:11:25.002 Parameter 95(SendOnSuccess): <0x95840b40>
08 02/16/16 20:11:25.002 Parameter 115(Show logo): 0 <0x95840b40>
08 02/16/16 20:11:25.002 Parameter 120(Retransmit): 0 <0x95840b40>
08 02/16/16 20:11:25.002 Parameter 126(Exclusive): 0 <0x95840b40>
08 02/16/16 20:11:25.002 Parameter 241(Detach): 0 <0x95840b40>
This is what happens, when the MD gets started. I can't say if I posted too much crap and not enough info, so if you need something else that would be helpful, let me know
-
hmm...right now mythtv doesn't seem to work at all, or lets say only sporadically. I'm out of my depth. Anyone has an idea, what I could do, where I should check?
right now nothing is working. I got internet access, but that's it. I cannot access dcerouter, no webadmin, no ssh. all I did was starting mythtv.
-
So I am thinking now. Should I switch over to VDR? What do you guys think. If so, do I have to reinstall everything, or can I just make a switch on the existing system?
-
I cannot access dcerouter, no webadmin, no ssh. all I did was starting mythtv.
That sounds like the system is very, very broken on your install now.
J.
-
This is more or less always happening, when I try to start mythtv. When I start it, it will run and display live tv for maybe up to one minute, then it crashes. I get all sorts of messages from mythtv..the good old "all tuners are buys" - even though I put the proper order setting. Mythcontext is complaining, that the backend has died...and so on and so forth. I try two or three times more...and a total system hangup occurs..or at least everything starts taking long enough to produce timeouts.
I think currently mythtv is not usable. Maybe I should give vdr a try again. The last time I tried that was with 7.10, so I guess there has been quite some progress. Perhaps I could even use qorbiter to control my tv with that?
-
The long and short is still this: None of the DEVs are using mythtv. If you want mythtv to work properly someone (you, or others) will have to submit the required patches. I tried to help and was effectively told off by a user. Since that point I am loathe to touch mythtv for anyone.
We welcome patches on gitlab.
J.
-
I'm sorry to hear, that you had to encounter an i***d user. your help has always been very welcome with me.
Anyways, its not the first time I hear, that none of the developers are using mythtv. However, that does beg the question, why having it included at all. Is there going to be a move to drop it entirely? I will try out vdr right now...I'm guessing some of the developers use that to watch TV...if so, then there must be a good reason for it.
-
MythTV was very tightly integrated into LinuxMCE. However, with changes of MythTV outside of our reach, and the move of a lot of users in the US away from broadcasted TV to Netflix and stuff, people/devs moved away from MythTV. In Europe, VDR was always a good contender, but never was, nor is, as tightly integrated into LinuxMCE.
*I* am using VDR on a daily base, and if it doesn't work, SWMBO is _very_ upset, so I try to keep it going :) - One thing about VDR that can cause issues for people with limited resources is, that it never was designed in a client/server fashion, it is not very nice in disconnecting from tuners. I run a 4x DVB-S2 system, have a core and a single used MD and things are good, but even I do sometimes have an issue of not being able to switch to a channel due to ongoing recordings. Yes, I do record too much :*)
-
Good to know.
I did a clean install and want to give vdr a try. Now I checked in the wiki how to set it up. It mentions there, that in webadmin->advanced>configuration->VDR-Setup, i could do that- set up VDR. However it says there I should use commandline to configure it...is that correct?
I also saw on the screen, repeatedly: failed to get Pluto VDR.
-
Please start a new thread for a new topic.