LinuxMCE Forums
General => Installation issues => Topic started by: maverick0815 on January 31, 2016, 12:38:36 pm
-
I just tried a net install of 14.04 to make a hybrid.
the script quit with unmet dependencies:
lmce-hybrid: depends lmce-md-meta but it is not going to be installed
depends lmce-core but it is not going to be installed
right now I'm downloading the latest snapshot of 14.04, hopefully it works.
-
Just finished installing the 14.04 snapshot dating January 1st 2016
I got no sound via HDMI (nvidia gt610)
There were probably several problems getting some package, unfortunately I didn't get it all...at least it said failed to download Mysql-client, pluto-mythtv-player, pluto-xine-plugin
Webadmin was not accessible
Hard drives were not detected
For now i will try to go back to 12.04, because I neglected to create a proper backup.
Cheers,
Mario
-
Thanks for the heads up. I'll check the 1404 repo today. We had some issues with our first git built package versions that we've fixed up in 1204, didn't realize 1404 might be affected, although I should have. Thanks for testing!
J.
-
Well, I really don't want to be the bearer of bad news, but the same things happen when I try to install 12.04...I got no sound, webadmin doesn't work, I cannot setup up mythtv
-
http://wiki.linuxmce.org/index.php/LinuxMCE-1204/1404_Updates <- check here, until the updates are pushed to the main repo I'm afraid you'll have issues no matter what you do. :| It is being worked on.
J.
-
I understand...I will wait until this is fixed and then try again. I really appreciate what you guys are doing.
I'll hold my fingers crossed :-)
-
Updates are in, things should upgrade properly now. I've tested the Jan. 01 1204 and 1404 DVDs for installation/upgrading/media.
J.
-
Mon, 01 Feb 2016 11:23:56 -0500 Failed to get data from PK_InfraredGroup=6038&PK_DeviceTemplate=2033&Restricted=0
dpkg: error processing package pluto-dcerouter (--configure):
subprocess installed post-installation script returned error exit status 1
Setting up pluto-text-to-speech (2.0.0.47.201602010250+8af1c080) ...
CMU HTS festival voice already installed, no action required.
dpkg: dependency problems prevent configuration of lmce-core:
lmce-core depends on pluto-dcerouter (>= 2.0.0.47); however:
Package pluto-dcerouter is not configured yet.
lmce-core depends on pluto-dcerouter (<< 2.0.0.48); however:
Package pluto-dcerouter is not configured yet.
dpkg: error processing package lmce-core (--configure):
dependency problems - leaving unconfigured
No apport report written because the error message indicates its a followup error from a previous failure.
Setting up lmce-datalog-database (2.0.0.47.201602010250+8af1c080) ...
Setting up pluto-xine-player (2.0.0.47.201602010250+8af1c080) ...
Alsa not installed yet. Can't run alsaconf
modprobe-ing bttv
grep: /etc/X11/xorg.conf: No such file or directory
Setting up pluto-avwizard (2.0.0.47.201602010250+8af1c080) ...
Setting up pluto-orbiter (2.0.0.47.201602010250+8af1c080) ...
Upgrading from version '2.0.0.47.15121131752'. Not setting up X again
Setting up lmce-md-meta (2.0.0.47.201602010250+8af1c080) ...
dpkg: dependency problems prevent configuration of lmce-hybrid:
lmce-hybrid depends on lmce-core (>= 2.0.0.47); however:
Package lmce-core is not configured yet.
lmce-hybrid depends on lmce-core (<< 2.0.0.48); however:
Package lmce-core is not configured yet.
dpkg: error processing package lmce-hybrid (--configure):
dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
Setting up lmce-weather-plugin (2.0.0.47.201602010250+8af1c080) ...
Processing triggers for libc-bin (2.19-0ubuntu6.6) ...
Errors were encountered while processing:
lmce-phoenix-solo-usb
pluto-dcerouter
lmce-core
lmce-hybrid
E: Sub-process /usr/bin/dpkg returned an error code (1)
dcerouter_1047348:~#
-
What is this? You will need to provide some specifics about your installation and what you are doing for this to mean anything.
J.
-
it is 14.04 jan 1st install and I did apt-get update and then apt-get upgrade and got that
it grabs the last update and errors out on upgrade
-
dcerouter_1047348:# apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
The following packages were automatically installed and are no longer required:
apt-clone archdetect-deb ca-certificates-java default-jre
default-jre-headless dmraid dpkg-repack fonts-opensymbol
gstreamer0.10-pulseaudio java-common kpartx kpartx-boot libatk-wrapper-java
libatk-wrapper-java-jni libboost-date-time1.54.0 libcdr-0.0-0
libclucene-contribs1 libcmis-0.4-4 libcolamd2.8.0 libdebian-installer4
libdmraid1.0.0.rc16 libexttextcat-2.0-0 libexttextcat-data libgconf2-4
libhsqldb1.8.0-java libhyphen0 liblangtag-common liblangtag1 libmspub-0.0-0
liborcus-0.6-0 libpulsedsp libreoffice-common libreoffice-java-common
libreoffice-style-galaxy libsbc1 libsctp1 libservlet3.0-java libvisio-0.0-0
libwpd-0.9-9 libwpg-0.2-2 libwps-0.2-2 linux-headers-3.16.0-55
linux-headers-3.16.0-55-generic linux-image-3.16.0-55-generic
linux-image-extra-3.16.0-55-generic lksctp-tools localechooser-data lp-solve
lvm2 openjdk-7-jre openjdk-7-jre-headless pulseaudio-utils python3-icu
python3-pam rdate rtkit tzdata-java uno-libs3 ure watershed xfonts-mathml
Use 'apt-get autoremove' to remove them.
The following packages will be upgraded:
lmce-core pluto-dcerouter
2 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
4 not fully installed or removed.
Need to get 834 kB of archives.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] y
WARNING: The following packages cannot be authenticated!
pluto-dcerouter lmce-core
Authentication warning overridden.
Get:1 http://deb.linuxmce.org/ trusty/main pluto-dcerouter i386 2.0.0.47.201602010250+8af1c080 [829 kB]
Get:2 http://deb.linuxmce.org/ trusty/main lmce-core i386 2.0.0.47.201602010250+8af1c080 [5,366 B]
Fetched 834 kB in 1s (750 kB/s)
(Reading database ... 225401 files and directories currently installed.)
Preparing to unpack .../pluto-dcerouter_2.0.0.47.201602010250+8af1c080_i386.deb ...
Unpacking pluto-dcerouter (2.0.0.47.201602010250+8af1c080) over (2.0.0.47.15121131752) ...
Preparing to unpack .../lmce-core_2.0.0.47.201602010250+8af1c080_i386.deb ...
Unpacking lmce-core (2.0.0.47.201602010250+8af1c080) over (2.0.0.47.15121531757) ...
Setting up pluto-dcerouter (2.0.0.47.201602010250+8af1c080) ...
setting up dce router
Database already setup
given is experimental at ./generate_users_voicemenu.pl line 156 (#1)
(S experimental::smartmatch) given depends on both a lexical $_ and
smartmatch, both of which are experimental, so its behavior may change or
even be removed in any future release of perl.
See the explanation under "Experimental Details on given and when" in perlsyn.
when is experimental at ./generate_users_voicemenu.pl line 158 (#2)
(S experimental::smartmatch) when depends on smartmatch, which is
experimental. Additionally, it has several special cases that may
not be immediately obvious, and their behavior may change or
even be removed in any future release of perl.
See the explanation under "Experimental Details on given and when" in perlsyn.
when is experimental at ./generate_users_voicemenu.pl line 160 (#2)
when is experimental at ./generate_users_voicemenu.pl line 162 (#2)
given is experimental at ./generate_users_voicemenu.pl line 200 (#1)
when is experimental at ./generate_users_voicemenu.pl line 202 (#2)
when is experimental at ./generate_users_voicemenu.pl line 206 (#2)
Generating speech for IVR Main Menu (language: 1).
Text 2173: Thank you for calling.
Text 2168: If you know the extension of the person you wish to call, you may enter it at any time.
Text 2167: To call everybody in the house, dial 0.
Text 2169: To leave a message, please press the pound sign.
Generating speech for linux extension: 301
Text 2170: To call
Text 2171: , dial
Result: To call linux, dial 1.
Generating speech for invalid IVR entries.
Text 2172: Your selection is not valid, please try again.
1 02/01/16 12:05:03 /usr/pluto/bin/Update_StartupScrips.sh (server)Updating startup scripts
Adding user_xattr to filesystems that support it and remounting them
Updating IR codes for all devices
--2016-02-01 12:05:03-- http://linuxmce.org//GetIRCodes.php?Server=schema.linuxmce.org&PK_InfraredGroup=6038&PK_DeviceTemplate=2033&Restricted=0
Resolving linuxmce.org (linuxmce.org)... 193.200.112.137
Connecting to linuxmce.org (linuxmce.org)|193.200.112.137|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 7493 (7.3K) [text/html]
Saving to: ‘/tmp/tmp.klrXduSiuT’
100%[======================================>] 7,493 --.-K/s in 0s
2016-02-01 12:05:04 (597 MB/s) - ‘/tmp/tmp.klrXduSiuT’ saved [7493/7493]
; Footer: ?>r: <?
--2016-02-01 12:05:04-- http://linuxmce.org//GetIRCodes.php?Server=schema.linuxmce.org&PK_Manufacturer=200&PK_DeviceCategory=103&Restricted=0
Resolving linuxmce.org (linuxmce.org)... 193.200.112.137
Connecting to linuxmce.org (linuxmce.org)|193.200.112.137|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 7493 (7.3K) [text/html]
Saving to: ‘/tmp/tmp.bg629CyUsq’
100%[======================================>] 7,493 --.-K/s in 0s
2016-02-01 12:05:04 (648 MB/s) - ‘/tmp/tmp.bg629CyUsq’ saved [7493/7493]
; Footer: ?>r: <?
Mon, 01 Feb 2016 12:05:04 -0500 Failed to get data from PK_InfraredGroup=6038&PK_DeviceTemplate=2033&Restricted=0
dpkg: error processing package pluto-dcerouter (--configure):
subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of lmce-core:
lmce-core depends on pluto-dcerouter (>= 2.0.0.47); however:
Package pluto-dcerouter is not configured yet.
lmce-core depends on pluto-dcerouter (<< 2.0.0.48); however:
Package pluto-dcerouter is not configured yet.
dpkg: error processing package lmce-core (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of lmce-hybrid:
lmce-hybrid depends on lmce-core (>= 2.0.0.47); however:
Package lmce-core is not configured yet.
lmce-hybrid depends on lmce-core (<< 2.0.0.48); however:
Package lmce-core is not configured yet.
dpkg: error processing package lmce-hybrid (--configure):
dependency problems - leaving unconfigured
Setting up lmce-phoenix-solo-usb (2.0.0.47.201602010250+8af1c080) ...
No apport report written because the error message indicates its a followup error from a previous failure.
No apport report written because the error message indicates its a followup error from a previous failure.
SimplePhone: no process found
dpkg: error processing package lmce-phoenix-solo-usb (--configure):
subprocess installed post-installation script returned error exit status 1
No apport report written because MaxReports is reached already
Errors were encountered while processing:
pluto-dcerouter
lmce-core
lmce-hybrid
lmce-phoenix-solo-usb
E: Sub-process /usr/bin/dpkg returned an error code (1)
dcerouter_1047348:#
-
regarding the net-install, the errors persist.
I will try the snapshot now
-
Mon, 01 Feb 2016 12:05:04 -0500 Failed to get data from PK_InfraredGroup=6038&PK_DeviceTemplate=2033&Restricted=0
This error is not related to pkgs, but to something trying to update IR data that doesn't exist on the server. As best I can tell. This is unrelated to upgrade errors and will need to be solved seperately. Feel free to open a new thread darkwizard864.
J.
-
huh?
it is in pluto-dcerouter package it even in pluto-dcerouter.postinst
line 106
echo "Updating IR codes for all devices"
Q="SELECT DISTINCT FK_DeviceTemplate FROM Device JOIN DeviceTemplate ON FK_DeviceTemplate=PK_DeviceTemplate WHERE FK_InfraredGroup is not null"
Templates=$(RunSQL "$Q")
for Template in $Templates; do
/usr/pluto/bin/WebDB_GetIR.sh 0 "$Template"
done
-
I am aware of that. But it is something else causing your failure, not package versioning issues that we are dealing with in this thread :)
Please open a new thread for your issue darkwizard. Thank you.
J.
-
regarding the net-install, the errors persist.
I will try the snapshot now
I have just completed a fresh 1404 i386 kubuntu install (http://cdimage.ubuntu.com/kubuntu/releases/14.04/release/kubuntu-14.04-desktop-i386.iso) and followed the instructions at: http://wiki.linuxmce.org/index.php/Installing_1404. There is absolutely no problem. Everything installs perfectly.
Please triple check what you are doing. It takes a lot of time for me to test these things and that time could be much better spent.
J.
-
I just saw you put the fix in the update queue. Thank you very much.
Great work!
Cheers
Mario
-
Hy,
i just did a successful 14.04 net install.
I had problems with fresh 12.04 and 14.04 getting audio via hdmi to work in the past.
But now it is working out of the box!
The whole installation went totally smooth.
Will "customize" the new installation later.
Big thank You! Great Work!
edit:
p.s.:
this is my graphic card:
GF119 [GeForce GT 520]
using it in the hybrid...
-
Thanks for the positive feedback.
-
Great to hear! We fixed a very long-standing bug with hdmi audio and nvidia hardware that I hope fixes things up for a lot of people!
J.
-
I did a fresh net install yesterday.
on the first run of AVWizard, the NVIDIA-drivers were not present., only the TV-Card was offered for sound. I went through it and in the end clicked on disagree. This brought me back to a black screen and a hang up. I rebooted, went through the wizard, this time with NVIDIA-drivers automatically loaded and with sound :-)
The only thing left now, is the missing setup for Mythtv under Computing. I know Phenigma told me what package I need to reinstall, but unfortunately I forgot.
Other than that, I seem to have trouble opening ports in the firewall.
-
Not having nvidia drivers installed is definitely a bug in the initial boot. Based on what I know of the scripts I'm not even sure how that is possible to occur, but needs some investigation.
The mythtv-setup icon is created by the pluto-mythtv-player package's postinst. If it is not available then something likely did not complete there, again that would be a bug if we can figure out why.
Thanks for testing and reporting!
J.
-
Thanks alot :-)
-
I just found out, mythweb is missing
-
I don't believe it is missing, but it may not be configured fully. The switch to 0.27.5 changed a few things a few months back. None of the developers use mythtv at all so this will fall to those that use it to troubleshoot and provide/suggest fixes. :) Thanks.
J.
-
ok, since I have no real idea where to look, I will try a vm with lmce1204 and see if its working there...and if it is, whats different. I'll post my findings here.
-
Most of the info/settings for it are in /etc/apache2/sites-available and the active sites are symlinked into /etc/apache2/sites-active or something like that.
J.
-
I have checked that. /etc/apache2/sites-enabled has a symlink for mythweb.conf, which is in /etc/apache2/sites-available
I also verified in the mythweb.conf the directory tags
<Directory "/var/www/html/mythweb/data">
Options +FollowSymLinks +IncludesNoExec
<Directory "var/www/hml/mythweb" >
That is also what I'm supposed to check according to mythtv.org
The links are all working..so right now I don't know what else to check for.
I always get The requested URL /mythweb/ was not found on this server.
for dcerouter/mythweb
unless the url has changed to something I don't know...well I don't know why its not running, but of course my knowledge is limited
-
Hi maverik,
i dont know if i can help you,but i saw a error in your last post.
<Directory "/var/www/html/mythweb/data">
Options +FollowSymLinks +IncludesNoExec
<Directory "var/www/hml/mythweb" >
the last directory is wrong. It should be "var/www/html/mythweb",there is a t missing.Maybe its a typo or something wrong at your conf.
Howie
-
And i forgot to say the Mythweb address changed to ---> dcerouter/html/mythweb
Howie