LinuxMCE Forums
General => Installation issues => Topic started by: huh on August 04, 2015, 03:26:30 am
-
Quick background- running 12.04 on a Revo 1600 with a USB NIC. Only package I've installed (beyond the apt-get update && apt-get upgrade) was to try out Langstron's QOrbiter. I started with 30/6/2015's 14.04 install, but could not get the NIC's to work. Tried a couple other dates and settled on 14/6/2015's 12.04 install. I am pretty sure my NIC's didn't work out of the box with this one either- but somehow I was able to get connected enough to install QOrbiter. Shut it down for the night and moved the box to the basement.
Skipping steps to the Problem & Solution-
On boot (or manual /etc/init.d/networking restart) I got an error about an incomplete line. Lines 24-26 of the following are incorrect and get reverted back to this on reboot:
#####
# Loopback interface
#####
iface lo inet loopback
#####
# IPv4 network interfaces
#####
# --- External NIC ---
iface eth0 inet dhcp
pre-up sysctl -q -e -w net.ipv6.conf.eth0.disable_ipv6=1
# --- Internal NIC ---
iface eth1 inet static
address 192.168.80.1
netmask 255.255.255.0
pre-up sysctl -q -e -w net.ipv6.conf.eth1.disable_ipv6=1
# DNS Settings for Internal Net
dns-nameservers 192.168.80.1
dns-search LinuxMCE
# --- ---
iface inet static
address
netmask
#####
# Activating interfaces
#####
auto eth0 eth1 lo
Simply adding # before lines 24 through 26, saving and running "/etc/init.d/networking restart" gets my NIC's running. (For ease of reference, here are lines 23 through 26:
# --- ---
iface inet static
address
netmask
-
Huh,
I've seen the same thing on a number of occasions. Looks like one of the networking "automagic" scripts is leaving a template stub behind after it's done it's business. Haven't had time to track it down and lodge a ticket/patch.
Just wanted to confirm that you aren't the only one who's seen it.
HTH!
/Mike
-
the same occurs to me .
i posted on http://forum.linuxmce.org/index.php?topic=14100.msg101884#msg101884