LinuxMCE Forums
General => Installation issues => Topic started by: hanafi on May 22, 2015, 10:54:59 am
-
during my installation of LinuxMCE 1404 I managed to configure my sound through HDMI in awizard
once orbiter no sound
My assound.conf and asound.template.conf its ok
help me please
-
How did you determine that you do not have sound when playing media? What media did you try playing?
-
thans for repley
in awizard i have sound dts on hdmi and when i play any think radio movie or music no sound
LMCE 1404
NVIDIA
and no card sound
-
are you able to play the media with a regular Ubuntu 1404 Live DVD?
-
yes
i don't understand a problem
-
hi
i add usb phoenix on core now i have sound on phoenix
what's a problem
driver nvidia ?
or alsa
-
Sorry, out of ideas.
-
thanks posde
-
hi posde
dmsg give me thi error
nvidia: module license 'NVIDIA' taints kernel.
[ 20.801871] Disabling lock debugging due to kernel taint
[ 20.814423] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 20.821934] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 20.822302] [drm] Initialized nvidia-drm 0.0.0 20140818 for 0000:02:00.0 on minor 0
[ 20.822313] NVRM: loading NVIDIA UNIX x86 Kernel Module 304.125 Mon Dec 1 19:55:52 PST 2014
can you help me if this is problem drivers nvidia
-
That doesn't look out of the ordinary.
-
Please run the following:
pastebinit /etc/asound.conf
pastebinit /etc/pluto/xine.conf
and paste the references here so we can see the config files. Thanks.
J.
-
hi phenigma
thanks
my /etc/asound.conf
</etc/pluto/alsa/virtual_cards.conf>
ve.hdmi_convert48k {
pcm "plughw:0,7"
rate 48000
}
pcm.hdmi_playback {
type plug
slave hdmi_convert48k
}
pcm.asym_hdmi {
type asym
playback.pcm "hdmi_playback"
capture.pcm "plughw:0,7"
}
pcm.!default asyn_hdmi
and my /etc/pluto/xine.conf
#
# xine config file
#
.version:1
# Entries which are still set to their default values are commented out.
# Remove the '#' at the beginning of the line, if you want to change them.
# Enable deinterlacing by default
# bool, default: 0
#gui.deinterlace_by_default:0
# Configuration experience level
# { Beginner Advanced Expert Master of the known universe }, default: 0
gui.experience_level:Master of the known universe
# Enable OSD support
# bool, default: 1
#gui.osd_enabled:1
# Dismiss OSD time (s)
# numeric, default: 3
#gui.osd_timeout:3
# Ask user for playback with unsupported codec
# bool, default: 0
#gui.play_anyway:0
# Automatically reload old playlist
# bool, default: 0
#gui.playlist_auto_reload:0
# Audio visualization plugin
# { fftgraph fftscope oscope goom }, default: 0
gui.post_audio_plugin:goom
# gui skin theme
# { xinetic }, default: 0
#gui.skin:xinetic
# Change xine's behavior for unexperienced user
# bool, default: 1
#gui.smart_mode:1
# Snapshot location
# string, default: /root
#gui.snapshotdir:/root
# Display splash screen
# bool, default: 1
#gui.splash:1
# Subtitle autoloading
# bool, default: 1
gui.subtitle_autoload:1
# Visual animation style
# { None Post Plugin Stream Animation }, default: 1
#gui.visual_anim:Post Plugin
# Windows stacking (more)
# bool, default: 0
#gui.always_layer_above:0
# Audio mixer control method
# { Sound card Software }, default: 0
#gui.audio_mixer_method:Sound card
# Visiblility behavior of panel
# bool, default: 0
#gui.auto_panel_visibility:0
# Visibility behavior of output window
# bool, default: 0
#gui.auto_video_output_visibility:0
# Deinterlace plugin.
# string, default: tvtime:method=LinearBlend,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
#gui.deinterlace_plugin:tvtime:method=LinearBlend,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
# Event sender behavior
# bool, default: 1
#gui.eventer_sticky:1
# Windows stacking
# bool, default: 0
#gui.layer_above:0
# Use unscaled OSD
# bool, default: 1
#gui.osd_use_unscaled:1
# Screensaver wakeup
# numeric, default: 10
#gui.screensaver_timeout:10
# Menu shortcut style
# { Windows style Emacs style }, default: 0
#gui.shortcut_style:Windows style
# Stream information
# bool, default: 0
#gui.sinfo_auto_update:0
# Skin Server Url
# string, default: http://xine.sourceforge.net/skins/skins.slx
#gui.skin_server_url:http://xine.sourceforge.net/skins/skins.slx
# Chapter hopping
# bool, default: 1
#gui.skip_by_chapter:1
# New stream sizes resize output window
# bool, default: 1
#gui.stream_resize_window:1
# tips timeout (ms)
# numeric, default: 500
#gui.tips_timeout:500
# gui tips visibility
# bool, default: 1
#gui.tips_visible:1
# Synchronized X protocol (debug)
# bool, default: 0
#gui.xsynchronize:0
# Double size for small streams (require stream_resize_window)
# bool, default: 0
#gui.zoom_small_stream:0
# Logo mrl
# string, default: file:/usr/share/xine/skins/xine-ui_logo.mpv
#gui.logo_mrl:file:/usr/share/xine/skins/xine-ui_logo.mpv
# use XVidModeExtension when switching to fullscreen
# bool, default: 0
#gui.use_xvidext:0
# Amplification level
# [0..200], default: 100
#gui.amp_level:100
# gui panel visibility
# bool, default: 1
#gui.panel_visible:1
# numeric, default: 200
gui.panel_x:53
# numeric, default: 100
gui.panel_y:313
# brightness value
# [0..65535], default: 32800
#gui.vo_brightness:32800
# contrast value
# [0..65535], default: 32772
#gui.vo_contrast:32772
# saturation value
# [0..65535], default: 32772
#gui.vo_saturation:32772
gui.control_x:262
gui.control_y:182
gui.eventer_x:653
gui.eventer_y:680
gui.mrl_browser_x:435
gui.mrl_browser_y:527
gui.setup_x:406
gui.setup_y:221
gui.sinfos_x:400
gui.sinfos_y:408
gui.tvset_x:246
gui.tvset_y:193
# speaker arrangement
# { Mono 1.0 Stereo 2.0 Headphones 2.0 Stereo 2.1 Surround 3.0 Surround 4.0 Surround 4.1 Surround 5.0 Surround 5.1 Surround 6.0 Surround 6.1 Surround 7.1 Pass Through }, default: 1
#audio.speaker_arrangement:Stereo 2.0
# audio driver to use
# { auto null alsa oss arts esd none file }, default: 0
audio.driver:auto
# OSS audio mixer number, -1 for none
# numeric, default: -1
#audio.mixer_number:-1
# startup audio volume
# [0..100], default: 50
#audio.mixer_volume:50
# OSS audio device name
# { auto /dev/dsp /dev/sound/dsp }, default: 0
#audio.oss_device_name:auto
# OSS audio device number, -1 for none
# numeric, default: -1
#audio.oss_device_number:-1
# offset for digital passthrough
# numeric, default: 0
#audio.passthrough_offset:0
# restore volume level at startup
# bool, default: 0
#audio.remember_volume:0
# method to sync audio and video
# { metronom feedback resample }, default: 0
#audio.av_sync_method:metronom feedback
# always resample to this rate (0 to disable)
# numeric, default: 0
#audio.force_rate:0
# number of audio buffers
# numeric, default: 230
#audio.num_buffers:230
# a/v sync method to use by OSS
# { auto getodelay getoptr softsync probebuffer }, default: 0
#audio.oss_sync_method:auto
# enable resampling
# { auto off on }, default: 0
#audio.resample_mode:auto
audio.alsa_front_device:default
audio.alsa_mixer_name:Master
# deinterlace method (deprecated)
# { none bob weave greedy onefield onefield_xv linearblend }, default: 4
#video.deinterlace_method:onefield
# disable all video scaling
# bool, default: 0
#video.disable_scaling:0
# video driver to use
# { auto aadxr3 dxr3 xv xshm aa none vidixfb vidix fb }, default: 0
video.driver:xv
# horizontal image position in the output window
# [0..100], default: 50
#video.horizontal_position:50
# vertical image position in the output window
# [0..100], default: 50
#video.vertical_position:50
# pitch alignment workaround
# bool, default: 0
#video.xv_pitch_alignment:0
# enable double buffering
# bool, default: 1
#video.XV_DOUBLE_BUFFER:1
# number of video buffers
# numeric, default: 500
#video.num_buffers:500
# percentage of discarded frames to tolerate
# numeric, default: 10
#video.warn_discarded_threshold:10
# percentage of skipped frames to tolerate
# numeric, default: 10
#video.warn_skipped_threshold:10
# autopaint colour key
# bool, default: 0
#video.xv_autopaint_colorkey:0
# video overlay colour key
# [0..16777215], default: 66046
#video.xv_colorkey:66046
# framebuffer device name
# string, default:
#video.fb_device:
# DXR3 device number
# numeric, default: 0
#dxr3.device_number:0
# swap odd and even lines
# bool, default: 0
#dxr3.enc_swap_fields:0
# add black bars to correct aspect ratio
# bool, default: 1
#dxr3.enc_add_bars:1
# use smooth play mode for mpeg encoder playback
# bool, default: 1
#dxr3.enc_alt_play_mode:1
# Remember last DVB channel watched
# bool, default: 1
#input.dvb_last_channel_enable:1
# display DVB channel name
# bool, default: 0
#input.dvbdisplaychan:0
# default language for DVD playback
# string, default: en
#input.dvd_language:en
# region the DVD player claims to be in (1 to 8)
# numeric, default: 1
#input.dvd_region:1
# file browsing start location
# string, default: /home/work/pluto-svn/trunk/bin
# network bandwidth
# { 14.4 Kbps (Modem) 19.2 Kbps (Modem) 28.8 Kbps (Modem) 33.6 Kbps (Modem) 34.4 Kbps (Modem) 57.6 Kbps (Modem) 115.2 Kbps (ISDN) 262.2 Kbps (Cable/DSL) 393.2 Kbps (Cable/DSL) 524.3 Kbps (Cable/DSL) 1.5 Mbps (T1) 10.5 Mbps (LAN) }, default: 10
#input.mms_network_bandwidth:1.5 Mbps (T1)
# device used for CD audio
# string, default: /dev/cdrom
#input.cdda_device:/dev/cdrom
# query CDDB
# bool, default: 1
#input.cdda_use_cddb:1
# slow down disc drive to this speed factor
# numeric, default: 4
#input.drive_slowdown:4
# device used for DVD playback
# string, default: /dev/dvd
#input.dvd_device:/dev/dvd
# raw device set up for DVD access
# string, default: /dev/rdvd
#input.dvd_raw_device:/dev/rdvd
# read-ahead caching
# bool, default: 1
#input.dvd_use_readahead:1
# list hidden files
# bool, default: 0
#input.file_hidden_files:0
# Domains, where to ignore the HTTP proxy
# string, default:
#input.http_no_proxy:
# HTTP proxy host
# string, default:
#input.http_proxy_host:
# HTTP proxy password
# string, default:
#input.http_proxy_password:
# HTTP proxy port
# numeric, default: 80
#input.http_proxy_port:80
# HTTP proxy username
# string, default:
#input.http_proxy_user:
# device used for WinTV-PVR 250/350 (pvr plugin)
# string, default: /dev/video0
#input.pvr_device:/dev/video0
# v4l radio device
# string, default: /dev/v4l/radio0
#input.v4l_radio_device_path:/dev/v4l/radio0
# v4l video device
# string, default: /dev/v4l/video0
#input.v4l_video_device_path:/dev/v4l/video0
# device used for VCD playback
# string, default: /dev/cdrom
#input.vcd_device:/dev/cdrom
# Remember last DVB channel watched
# numeric, default: -1
#input.dvb_last_channel_watched:-1
# CSS decryption method
# { key disc title }, default: 0
#input.css_decryption_method:key
# unit for seeking
# { seek in program chain seek in program }, default: 0
#input.dvd_seek_behaviour:seek in program chain
# unit for the skip action
# { skip program skip part skip title }, default: 0
#input.dvd_skip_behaviour:skip program
# MMS protocol
# { auto TCP HTTP }, default: 0
#input.mms_protocol:auto
# CDDB cache directory
# string, default: /root/.xine/cddbcache
#input.cdda_cddb_cachedir:/root/.xine/cddbcache
# CDDB server port
# numeric, default: 8880
#input.cdda_cddb_port:8880
# CDDB server name
# string, default: freedb.freedb.org
#input.cdda_cddb_server:freedb.freedb.org
# path to the title key cache
# string, default: /root/.dvdcss/
input.css_cache_path:/home/.dvdcss/
# use A/52 dynamic range compression
# bool, default: 0
#codec.a52_dynrng:0
# downmix audio to 2 channel surround stereo
# bool, default: 0
#codec.a52_surround_downmix:0
# A/52 volume
# [0..200], default: 100
#codec.a52_level:100
# MPEG-4 postprocessing quality
# [0..6], default: 3
#codec.ffmpeg_pp_quality:3
# path to RealPlayer codecs
# string, default: unknown
codec.real_codecs_path:/usr/lib/win32
# path to Win32 codecs
# string, default: /usr/lib/win32
#codec.win32_path:/usr/lib/win32
# frames per second to generate
# numeric, default: 10
#post.goom_fps:10
# goom image height
# numeric, default: 240
#post.goom_height:240
# goom image width
# numeric, default: 320
#post.goom_width:320
# colorspace conversion method
# { Fast but not photorealistic Slow but looks better }, default: 0
#post.goom_csc_method:Fast but not photorealistic
# priority for a/52 decoder
# numeric, default: 0
#decoder.a/52_priority:0
# priority for bitplane decoder
# numeric, default: 0
#decoder.bitplane_priority:0
# priority for dts decoder
# numeric, default: 0
#decoder.dts_priority:0
# priority for dvaudio decoder
# numeric, default: 0
#decoder.dvaudio_priority:0
# priority for dxr3-mpeg2 decoder
# numeric, default: 0
#decoder.dxr3-mpeg2_priority:0
# priority for dxr3-spudec decoder
# numeric, default: 0
#decoder.dxr3-spudec_priority:0
# priority for faad decoder
# numeric, default: 0
#decoder.faad_priority:0
# priority for ffmpeg-wmv8 decoder
# numeric, default: 0
#decoder.ffmpeg-wmv8_priority:0
# priority for ffmpegaudio decoder
# numeric, default: 0
#decoder.ffmpegaudio_priority:0
# priority for ffmpegvideo decoder
# numeric, default: 0
#decoder.ffmpegvideo_priority:0
# priority for flacdec decoder
# numeric, default: 0
#decoder.flacdec_priority:0
# priority for gsm610 decoder
# numeric, default: 0
#decoder.gsm610_priority:0
# priority for image decoder
# numeric, default: 0
#decoder.image_priority:0
# priority for mad decoder
# numeric, default: 0
#decoder.mad_priority:0
# priority for mpeg2 decoder
# numeric, default: 0
#decoder.mpeg2_priority:0
# priority for nsf decoder
# numeric, default: 0
#decoder.nsf_priority:0
# priority for pcm decoder
# numeric, default: 0
#decoder.pcm_priority:0
# priority for qta decoder
# numeric, default: 0
#decoder.qta_priority:0
# priority for qtv decoder
# numeric, default: 0
#decoder.qtv_priority:0
# priority for real decoder
# numeric, default: 0
#decoder.real_priority:0
# priority for realadec decoder
# numeric, default: 0
#decoder.realadec_priority:0
# priority for rgb decoder
# numeric, default: 0
#decoder.rgb_priority:0
# priority for speex decoder
# numeric, default: 0
#decoder.speex_priority:0
# priority for spucc decoder
# numeric, default: 0
#decoder.spucc_priority:0
# priority for spucmml decoder
# numeric, default: 0
#decoder.spucmml_priority:0
# priority for spudec decoder
# numeric, default: 0
#decoder.spudec_priority:0
# priority for sputext decoder
# numeric, default: 0
#decoder.sputext_priority:0
# priority for vorbis decoder
# numeric, default: 0
#decoder.vorbis_priority:0
# priority for win32a decoder
# numeric, default: 0
#decoder.win32a_priority:0
# priority for win32v decoder
# numeric, default: 0
#decoder.win32v_priority:0
# priority for yuv decoder
# numeric, default: 0
#decoder.yuv_priority:0
# subtitle size
# { tiny small normal large very large huge }, default: 1
misc.spu_subtitle_size:large
# subtitle vertical offset
# numeric, default: 0
#misc.spu_vertical_offset:0
# palette (foreground-border-background) to use for subtitles and OSD
# { white-black-transparent white-none-transparent white-none-translucid yellow-black-transparent }, default: 0
#misc.osd_text_palette:white-black-transparent
# font for subtitles
# string, default: sans
#misc.spu_font:sans
# encoding of the subtitles
# string, default: iso-8859-1
#misc.spu_src_encoding:iso-8859-1
# use unscaled OSD if possible
# bool, default: 1
#misc.spu_use_unscaled_osd:1
# media format detection strategy
# { default reverse content extension }, default: 0
#misc.demux_strategy:default
# memcopy method used by xine
# { probe libc kernel mmx mmxext sse }, default: 0
misc.memcpy_method:sse
# default duration of subtitle display in seconds
# numeric, default: 4
#misc.sub_timeout:4
# allow implicit changes to the configuration (e.g. by MRL)
# bool, default: 0
#misc.implicit_config:0
# directory for saving streams
# string, default:
#misc.save_dir:
# automatically advance track/entry
# bool, default: 1
#vcd.autoadvance:1
# default type to use on VCD autoplay
# { track entry segment playlist }, default: 3
#vcd.autoplay:playlist
# position slider range
# { auto track entry }, default: 0
#vcd.length_reporting:auto
# show 'rejected' LIDs
# bool, default: 0
#vcd.show_rejected:0
# format string for stream comment field
# string, default: %P - Track %T
#vcd.comment_format:%P - Track %T
# debug flag mask
# numeric, default: 0
#vcd.debug:0
# default CD drive used for VCD when none given
# string, default:
#vcd.default_device:
# format string for display banner
# string, default: %F - %I %N%L%S, disk %c of %C - %v %A
#vcd.title_format:%F - %I %N%L%S, disk %c of %C - %v %A
audio.device.alsa_front_device:plughw:0,7
audio.device.alsa_default_device:plughw:0,7
audio.device.alsa_pcm_device:plughw:0,7
audio.output.speaker_arrangement:Pass Through
audio.device.alsa_passthrough_device:plughw:0,7
audio.device.alsa_surround40_device:plughw:0,7
audio.device.alsa_surround41_device:plughw:0,7
audio.device.alsa_surround50_device:plughw:0,7
audio.device.alsa_surround51_device:plughw:0,7
-
Sorry for the delay, I've been away. Those files look good. One more thing to check. At the command prompt run 'alsamixer' and ensure that all of the output devices are un-muted. Sometimes the mixer devices are not all un-muted on start-up.
J.
-
Hi Guys, Been a while......
Firstly Apologies Hanafi, don't mean to hi-jack your thread, but I have a similar problem. I cant get hdmi audio to work at all. I'm running Dianemo 14.04 though.
asound.conf
</etc/pluto/alsa/virtual_cards.conf>
pcm_slave.convert {
@args [ RATE CARD DEV ]
@args.RATE {
type integer
}
@args.CARD {
type string
}
@args.DEV {
type integer
default 0
}
pcm {
@func concat
strings [ $CARD "," $DEV ]
}
rate $RATE
}
pcm.spdif_playback {
type plug
slave {
@func concat
strings [ "convert:RATE=48000,CARD=spdif:0"
",DEV="
{
@func refer
name defaults.pcm.iec958.device
}
]
}
}
pcm.hdmi_playback {
type plug
slave {
@func concat
strings [ "convert:RATE=48000,CARD=hdmi:0"
",DEV="
{
@func refer
name defaults.pcm.iec958.device
}
]
}
}
pcm.asym_spdif {
type asym
playback.pcm "spdif_playback"
capture.pcm "plughw:0"
}
pcm.asym_hdmi {
type asym
playback.pcm "hdmi_playback"
capture.pcm "plughw:0"
}
pcm.asym_analog {
type asym
playback.pcm "plug:dmix:0"
capture.pcm "plughw:0"
}
pcm.!default asym_hdmi
I suspect the problem is with the section pcm.asym_hdmi , "plughw:0" shouldn't it be "plughw:0,8" cause I can test audio by
aplay -D plughw:0,8 Front_Center.wavThat plays and I can hear "Front Centre" though my TV speakers that's connected via the HDMI cable. However if I play a mp3 file the same way, its distorted...... I must add that I had no Audio with AV-wizard or with Sarah.
I have also attached a pic of alsamixer. I cant seem to adjust audio levels..... or am I missing something????
Thanx in advance guys. ;D
-
I'm not an expert in alsa, nor am I super familiar with the Dianemo stuff, however I think you need to make the following change:
"convert:RATE=48000,CARD=hdmi:0"
",DEV="
to
"convert:RATE=48000,CARD=hdmi:0,DEV=8"
based on the aplay test you performed.
You may not be able to adjust the audio levels of the HDMI output in alsamixer, this is common for digital outputs that are expected to have a downstream device (amp/TV) with volume control.
I hope that helps, or pushes you in the correct direction!
J.
-
Thanx for that Phenigma,
If I correct the asound.conf, it works but when I reboot my changes are not stored.
Then if I do tests with aplay the audio plays, but nothing plays via orbiter. I copied the doorbell.mpg from the samples folder to the videos folder. But when choosing that only video plays with no sound :-(
Karel
-
Check with Dianemo, as their way of configuring sound hardware is different from the way LinuxMCE is doing it.
-
Oh well.... After reading the thread about Andy/Andrew/Totallymaxed,
Dont think I will get the answer to my question.... :-(
Karel
-
Karel,
Andrew isn't Dianemo. Call Dianemo and check with them. I am sure they will help you find a fix.
-
I am bumping this thread because I am having the same issue, though I have found a work around. Consider the following:
1) When I run AVWizard and delect HDMI as the audio output, I get no sound in either Xine or MythTV, independent of the codecs in the video or audio file. The playback in AVWizard works however for both Dolby and DTS.Selecting stereo, everything works as expected with sound coming from the analog audio output.
2) Changing the audio output in Myth Frontend to one of the digital outputs, MythTV works fine.
3) Editing /etc/pluto/xine.conf, commenting the analog output entries at the end of the file, and replacing the with the digital ones generated previously, digital audio works fine in Xine.
I examined the other lines between the analog-generated file and the digital-generated one and it was unclear what was different. I am guessing that this file is generated from /usr/pluto/binAVWizard-XineDefaultConfig.sh. This is a complicated script.
My working xine.conf is below. See the added lines at the bottom:
#
# xine config file
#
.version:1
# Entries which are still set to their default values are commented out.
# Remove the '#' at the beginning of the line, if you want to change them.
# Enable deinterlacing by default
# bool, default: 0
#gui.deinterlace_by_default:0
# Configuration experience level
# { Beginner Advanced Expert Master of the known universe }, default: 0
gui.experience_level:Master of the known universe
# Enable OSD support
# bool, default: 1
#gui.osd_enabled:1
# Dismiss OSD time (s)
# numeric, default: 3
#gui.osd_timeout:3
# Ask user for playback with unsupported codec
# bool, default: 0
#gui.play_anyway:0
# Automatically reload old playlist
# bool, default: 0
#gui.playlist_auto_reload:0
# Audio visualization plugin
# { fftgraph fftscope oscope goom }, default: 0
gui.post_audio_plugin:goom
# gui skin theme
# { xinetic }, default: 0
#gui.skin:xinetic
# Change xine's behavior for unexperienced user
# bool, default: 1
#gui.smart_mode:1
# Snapshot location
# string, default: /root
#gui.snapshotdir:/root
# Display splash screen
# bool, default: 1
#gui.splash:1
# Subtitle autoloading
# bool, default: 1
gui.subtitle_autoload:1
# Visual animation style
# { None Post Plugin Stream Animation }, default: 1
#gui.visual_anim:Post Plugin
# Windows stacking (more)
# bool, default: 0
#gui.always_layer_above:0
# Audio mixer control method
# { Sound card Software }, default: 0
#gui.audio_mixer_method:Sound card
# Visiblility behavior of panel
# bool, default: 0
#gui.auto_panel_visibility:0
# Visibility behavior of output window
# bool, default: 0
#gui.auto_video_output_visibility:0
# Deinterlace plugin.
# string, default: tvtime:method=LinearBlend,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
#gui.deinterlace_plugin:tvtime:method=LinearBlend,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
# Event sender behavior
# bool, default: 1
#gui.eventer_sticky:1
# Windows stacking
# bool, default: 0
#gui.layer_above:0
# Use unscaled OSD
# bool, default: 1
#gui.osd_use_unscaled:1
# Screensaver wakeup
# numeric, default: 10
#gui.screensaver_timeout:10
# Menu shortcut style
# { Windows style Emacs style }, default: 0
#gui.shortcut_style:Windows style
# Stream information
# bool, default: 0
#gui.sinfo_auto_update:0
# Skin Server Url
# string, default: http://xine.sourceforge.net/skins/skins.slx
#gui.skin_server_url:http://xine.sourceforge.net/skins/skins.slx
# Chapter hopping
# bool, default: 1
#gui.skip_by_chapter:1
# New stream sizes resize output window
# bool, default: 1
#gui.stream_resize_window:1
# tips timeout (ms)
# numeric, default: 500
#gui.tips_timeout:500
# gui tips visibility
# bool, default: 1
#gui.tips_visible:1
# Synchronized X protocol (debug)
# bool, default: 0
#gui.xsynchronize:0
# Double size for small streams (require stream_resize_window)
# bool, default: 0
#gui.zoom_small_stream:0
# Logo mrl
# string, default: file:/usr/share/xine/skins/xine-ui_logo.mpv
#gui.logo_mrl:file:/usr/share/xine/skins/xine-ui_logo.mpv
# use XVidModeExtension when switching to fullscreen
# bool, default: 0
#gui.use_xvidext:0
# Amplification level
# [0..200], default: 100
#gui.amp_level:100
# gui panel visibility
# bool, default: 1
#gui.panel_visible:1
# numeric, default: 200
gui.panel_x:53
# numeric, default: 100
gui.panel_y:313
# brightness value
# [0..65535], default: 32800
#gui.vo_brightness:32800
# contrast value
# [0..65535], default: 32772
#gui.vo_contrast:32772
# saturation value
# [0..65535], default: 32772
#gui.vo_saturation:32772
gui.control_x:262
gui.control_y:182
gui.eventer_x:653
gui.eventer_y:680
gui.mrl_browser_x:435
gui.mrl_browser_y:527
gui.setup_x:406
gui.setup_y:221
gui.sinfos_x:400
gui.sinfos_y:408
gui.tvset_x:246
gui.tvset_y:193
# speaker arrangement
# { Mono 1.0 Stereo 2.0 Headphones 2.0 Stereo 2.1 Surround 3.0 Surround 4.0 Surround 4.1 Surround 5.0 Surround 5.1 Surround 6.0 Surround 6.1 Surround 7.1 Pass Through }, default: 1
#audio.speaker_arrangement:Stereo 2.0
# audio driver to use
# { auto null alsa oss arts esd none file }, default: 0
audio.driver:auto
# OSS audio mixer number, -1 for none
# numeric, default: -1
#audio.mixer_number:-1
# startup audio volume
# [0..100], default: 50
#audio.mixer_volume:50
# OSS audio device name
# { auto /dev/dsp /dev/sound/dsp }, default: 0
#audio.oss_device_name:auto
# OSS audio device number, -1 for none
# numeric, default: -1
#audio.oss_device_number:-1
# offset for digital passthrough
# numeric, default: 0
#audio.passthrough_offset:0
# restore volume level at startup
# bool, default: 0
#audio.remember_volume:0
# method to sync audio and video
# { metronom feedback resample }, default: 0
#audio.av_sync_method:metronom feedback
# always resample to this rate (0 to disable)
# numeric, default: 0
#audio.force_rate:0
# number of audio buffers
# numeric, default: 230
#audio.num_buffers:230
# a/v sync method to use by OSS
# { auto getodelay getoptr softsync probebuffer }, default: 0
#audio.oss_sync_method:auto
# enable resampling
# { auto off on }, default: 0
#audio.resample_mode:auto
audio.alsa_front_device:default
audio.alsa_mixer_name:Master
# deinterlace method (deprecated)
# { none bob weave greedy onefield onefield_xv linearblend }, default: 4
#video.deinterlace_method:onefield
# disable all video scaling
# bool, default: 0
#video.disable_scaling:0
# video driver to use
# { auto aadxr3 dxr3 xv xshm aa none vidixfb vidix fb }, default: 0
video.driver:xv
# horizontal image position in the output window
# [0..100], default: 50
#video.horizontal_position:50
# vertical image position in the output window
# [0..100], default: 50
#video.vertical_position:50
# pitch alignment workaround
# bool, default: 0
#video.xv_pitch_alignment:0
# enable double buffering
# bool, default: 1
#video.XV_DOUBLE_BUFFER:1
# number of video buffers
# numeric, default: 500
#video.num_buffers:500
# percentage of discarded frames to tolerate
# numeric, default: 10
#video.warn_discarded_threshold:10
# percentage of skipped frames to tolerate
# numeric, default: 10
#video.warn_skipped_threshold:10
# autopaint colour key
# bool, default: 0
#video.xv_autopaint_colorkey:0
# video overlay colour key
# [0..16777215], default: 66046
#video.xv_colorkey:66046
# framebuffer device name
# string, default:
#video.fb_device:
# DXR3 device number
# numeric, default: 0
#dxr3.device_number:0
# swap odd and even lines
# bool, default: 0
#dxr3.enc_swap_fields:0
# add black bars to correct aspect ratio
# bool, default: 1
#dxr3.enc_add_bars:1
# use smooth play mode for mpeg encoder playback
# bool, default: 1
#dxr3.enc_alt_play_mode:1
# Remember last DVB channel watched
# bool, default: 1
#input.dvb_last_channel_enable:1
# display DVB channel name
# bool, default: 0
#input.dvbdisplaychan:0
# default language for DVD playback
# string, default: en
#input.dvd_language:en
# region the DVD player claims to be in (1 to 8)
# numeric, default: 1
#input.dvd_region:1
# file browsing start location
# string, default: /home/work/pluto-svn/trunk/bin
# network bandwidth
# { 14.4 Kbps (Modem) 19.2 Kbps (Modem) 28.8 Kbps (Modem) 33.6 Kbps (Modem) 34.4 Kbps (Modem) 57.6 Kbps (Modem) 115.2 Kbps (ISDN) 262.2 Kbps (Cable/DSL) 393.2 Kbps (Cable/DSL) 524.3 Kbps (Cable/DSL) 1.5 Mbps (T1) 10.5 Mbps (LAN) }, default: 10
#input.mms_network_bandwidth:1.5 Mbps (T1)
# device used for CD audio
# string, default: /dev/cdrom
#input.cdda_device:/dev/cdrom
# query CDDB
# bool, default: 1
#input.cdda_use_cddb:1
# slow down disc drive to this speed factor
# numeric, default: 4
#input.drive_slowdown:4
# device used for DVD playback
# string, default: /dev/dvd
#input.dvd_device:/dev/dvd
# raw device set up for DVD access
# string, default: /dev/rdvd
#input.dvd_raw_device:/dev/rdvd
# read-ahead caching
# bool, default: 1
#input.dvd_use_readahead:1
# list hidden files
# bool, default: 0
#input.file_hidden_files:0
# Domains, where to ignore the HTTP proxy
# string, default:
#input.http_no_proxy:
# HTTP proxy host
# string, default:
#input.http_proxy_host:
# HTTP proxy password
# string, default:
#input.http_proxy_password:
# HTTP proxy port
# numeric, default: 80
#input.http_proxy_port:80
# HTTP proxy username
# string, default:
#input.http_proxy_user:
# device used for WinTV-PVR 250/350 (pvr plugin)
# string, default: /dev/video0
#input.pvr_device:/dev/video0
# v4l radio device
# string, default: /dev/v4l/radio0
#input.v4l_radio_device_path:/dev/v4l/radio0
# v4l video device
# string, default: /dev/v4l/video0
#input.v4l_video_device_path:/dev/v4l/video0
# device used for VCD playback
# string, default: /dev/cdrom
#input.vcd_device:/dev/cdrom
# Remember last DVB channel watched
# numeric, default: -1
#input.dvb_last_channel_watched:-1
# CSS decryption method
# { key disc title }, default: 0
#input.css_decryption_method:key
# unit for seeking
# { seek in program chain seek in program }, default: 0
#input.dvd_seek_behaviour:seek in program chain
# unit for the skip action
# { skip program skip part skip title }, default: 0
#input.dvd_skip_behaviour:skip program
# MMS protocol
# { auto TCP HTTP }, default: 0
#input.mms_protocol:auto
# CDDB cache directory
# string, default: /root/.xine/cddbcache
#input.cdda_cddb_cachedir:/root/.xine/cddbcache
# CDDB server port
# numeric, default: 8880
#input.cdda_cddb_port:8880
# CDDB server name
# string, default: freedb.freedb.org
#input.cdda_cddb_server:freedb.freedb.org
# path to the title key cache
# string, default: /root/.dvdcss/
input.css_cache_path:/home/.dvdcss/
# use A/52 dynamic range compression
# bool, default: 0
#codec.a52_dynrng:0
# downmix audio to 2 channel surround stereo
# bool, default: 0
#codec.a52_surround_downmix:0
# A/52 volume
# [0..200], default: 100
#codec.a52_level:100
# MPEG-4 postprocessing quality
# [0..6], default: 3
#codec.ffmpeg_pp_quality:3
# path to RealPlayer codecs
# string, default: unknown
codec.real_codecs_path:/usr/lib/win32
# path to Win32 codecs
# string, default: /usr/lib/win32
codec.win32_path:/usr/lib/win32
# frames per second to generate
# numeric, default: 10
#post.goom_fps:10
# goom image height
# numeric, default: 240
#post.goom_height:240
# goom image width
# numeric, default: 320
#post.goom_width:320
# colorspace conversion method
# { Fast but not photorealistic Slow but looks better }, default: 0
#post.goom_csc_method:Fast but not photorealistic
# priority for a/52 decoder
# numeric, default: 0
#decoder.a/52_priority:0
# priority for bitplane decoder
# numeric, default: 0
#decoder.bitplane_priority:0
# priority for dts decoder
# numeric, default: 0
#decoder.dts_priority:0
# priority for dvaudio decoder
# numeric, default: 0
#decoder.dvaudio_priority:0
# priority for dxr3-mpeg2 decoder
# numeric, default: 0
#decoder.dxr3-mpeg2_priority:0
# priority for dxr3-spudec decoder
# numeric, default: 0
#decoder.dxr3-spudec_priority:0
# priority for faad decoder
# numeric, default: 0
#decoder.faad_priority:0
# priority for ffmpeg-wmv8 decoder
# numeric, default: 0
#decoder.ffmpeg-wmv8_priority:0
# priority for ffmpegaudio decoder
# numeric, default: 0
#decoder.ffmpegaudio_priority:0
# priority for ffmpegvideo decoder
# numeric, default: 0
#decoder.ffmpegvideo_priority:0
# priority for flacdec decoder
# numeric, default: 0
#decoder.flacdec_priority:0
# priority for gsm610 decoder
# numeric, default: 0
#decoder.gsm610_priority:0
# priority for image decoder
# numeric, default: 0
#decoder.image_priority:0
# priority for mad decoder
# numeric, default: 0
#decoder.mad_priority:0
# priority for mpeg2 decoder
# numeric, default: 0
#decoder.mpeg2_priority:0
# priority for nsf decoder
# numeric, default: 0
#decoder.nsf_priority:0
# priority for pcm decoder
# numeric, default: 0
#decoder.pcm_priority:0
# priority for qta decoder
# numeric, default: 0
#decoder.qta_priority:0
# priority for qtv decoder
# numeric, default: 0
#decoder.qtv_priority:0
# priority for real decoder
# numeric, default: 0
#decoder.real_priority:0
# priority for realadec decoder
# numeric, default: 0
#decoder.realadec_priority:0
# priority for rgb decoder
# numeric, default: 0
#decoder.rgb_priority:0
# priority for speex decoder
# numeric, default: 0
#decoder.speex_priority:0
# priority for spucc decoder
# numeric, default: 0
#decoder.spucc_priority:0
# priority for spucmml decoder
# numeric, default: 0
#decoder.spucmml_priority:0
# priority for spudec decoder
# numeric, default: 0
#decoder.spudec_priority:0
# priority for sputext decoder
# numeric, default: 0
#decoder.sputext_priority:0
# priority for vorbis decoder
# numeric, default: 0
#decoder.vorbis_priority:0
# priority for win32a decoder
# numeric, default: 0
decoder.win32a_priority:0
# priority for win32v decoder
# numeric, default: 0
decoder.win32v_priority:0
# priority for yuv decoder
# numeric, default: 0
#decoder.yuv_priority:0
# subtitle size
# { tiny small normal large very large huge }, default: 1
misc.spu_subtitle_size:large
# subtitle vertical offset
# numeric, default: 0
#misc.spu_vertical_offset:0
# palette (foreground-border-background) to use for subtitles and OSD
# { white-black-transparent white-none-transparent white-none-translucid yellow-black-transparent }, default: 0
#misc.osd_text_palette:white-black-transparent
# font for subtitles
# string, default: sans
#misc.spu_font:sans
# encoding of the subtitles
# string, default: iso-8859-1
#misc.spu_src_encoding:iso-8859-1
# use unscaled OSD if possible
# bool, default: 1
#misc.spu_use_unscaled_osd:1
# media format detection strategy
# { default reverse content extension }, default: 0
#misc.demux_strategy:default
# memcopy method used by xine
# { probe libc kernel mmx mmxext sse }, default: 0
misc.memcpy_method:sse
# default duration of subtitle display in seconds
# numeric, default: 4
#misc.sub_timeout:4
# allow implicit changes to the configuration (e.g. by MRL)
# bool, default: 0
#misc.implicit_config:0
# directory for saving streams
# string, default:
#misc.save_dir:
# automatically advance track/entry
# bool, default: 1
#vcd.autoadvance:1
# default type to use on VCD autoplay
# { track entry segment playlist }, default: 3
#vcd.autoplay:playlist
# position slider range
# { auto track entry }, default: 0
#vcd.length_reporting:auto
# show 'rejected' LIDs
# bool, default: 0
#vcd.show_rejected:0
# format string for stream comment field
# string, default: %P - Track %T
#vcd.comment_format:%P - Track %T
# debug flag mask
# numeric, default: 0
#vcd.debug:0
# default CD drive used for VCD when none given
# string, default:
#vcd.default_device:
# format string for display banner
# string, default: %F - %I %N%L%S, disk %c of %C - %v %A
#vcd.title_format:%F - %I %N%L%S, disk %c of %C - %v %A
# audio.device.alsa_front_device:plug:dmix:1
# audio.device.alsa_default_device:plug:dmix:1
# audio.output.speaker_arrangement:Stereo 2.0
audio.device.alsa_front_device:plughw:1,7
audio.device.alsa_default_device:plughw:1,7
audio.device.alsa_pcm_device:plughw:1,7
audio.output.speaker_arrangement:Pass Through
audio.device.alsa_passthrough_device:plughw:1,7
audio.device.alsa_surround40_device:plughw:1,7
audio.device.alsa_surround41_device:plughw:1,7
audio.device.alsa_surround50_device:plughw:1,7
audio.device.alsa_surround51_device:plughw:1,7
If others are still having this problem, it would be good to know.
CDM
-
As we've mentioned there is really no one maintaining mythtv. Patches are welcome. Otherwise it sounds like a mismatch in settings for xine. You have not provided any information about your video card hardware or card id. I'm aware of the xine config, but it is extremely variable depending on hardware.
Sent from my Nexus 5 using Tapatalk
-
Sorry about that. I am using onboard Intel graphics. The audio chip is a Realtek ALC887. Motherboard is an Asus P8H67-M LE.
Thanks again for the very quick reply.
CDM