LinuxMCE Forums
General => Installation issues => Topic started by: cfernandes on February 13, 2014, 05:59:55 pm
-
HI,
i try to install 12.04 on a new machine and motion wrapper is failling to install Depends off libavcodec52 and on 12.04 use libavcodec53
-
i found a soultion but i cant create a ticket on svn
motion wrapper depend libavcodec52 but on 12.04 the correct is libavcodec53
need to change on pakcage
Pre-Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1), ffmpeg, motion, libavcodec53, libdc1394-22
-
Hi,
I'm fairly certain that when I did apt-get install kubuntu-restricted-extras the libavcodec53 was downloaded (plus a bunch of other packages).
Cheers.
-
is correct.
but motion wrapper is dependent of libavcodec52 and this dependence need to be change to libavcodec53
i change in my installation and motion wrapper is working with libavcodec53
-
This is updated now and a new package will be created and pushed to the repository. Thanks cfernandes!
J.
-
After the last update Motion Wrapper is died
/usr/pluto/bin/Spawn_Device.sh: line 170: 30145 Segmentation fault (core dumped) /usr/pluto/bin/Spawn_Wrapper.sh "$Path$cmd_line" -d "$device_id" -r "$ip_of_router" -l "$LogFile"
LOG: Return code: 139
3 09/05/15 08:46:38 36 (spawning-device) Device died... count=15/50 dev=36
3 09/05/15 08:46:38 36 (spawning-device) Device died... count=15/50 dev=36
-
I'm pushing the new motion package to the repo this weekend. The config scripts where updated some time ago with no update in the motion package. Watch the 1204 updates page to see when the update goes in. Thank for reporting!
J.
-
New motion package is online for 1204.
-
i update . but not work
the problem is the motion_wrapper cant connect to dcerouter
dcerouter refuse the conection.
if run /usr/bin/motion the daemon is running.
but motion_wrapper cant connect to dcerouter
this is log from DCErouter.log when a call motion_wrapper
05 09/06/15 9:37:28.994 Socket::ReceiveData 0xb598e890 failed, bytes left 0 start: 7840000 1: 0 1b: 0 2: 0 2b: 0 m_Socket: 211 Incoming_Conn Socket 211 ::ffff:192.168.80.1EVENT 179 T=64 Event #179 <0x570fcb40>
05 09/06/15 9:37:28.994 Socket::ReceiveString2 ReceiveData failed m_Socket: -1 Incoming_Conn Socket 211 ::ffff:192.168.80.1EVENT 179 T=64 Event #179 <0x570fcb40>
05 09/06/15 9:37:28.994 TCPIP: Closing connection to 179 (Router Dev #0) 0xb598e890 m_Socket: -1 <0x570fcb40>
05 09/06/15 9:37:28.994 Router::RemoveAndDeleteSocket 0xb598e890 179 <0x570fcb40>
05 09/06/15 9:37:28.994 Socket::ReceiveData 0x5e521058 failed, bytes left 0 start: 7840000 1: 0 1b: 0 2: 0 2b: 0 m_Socket: 212 Incoming_Conn Socket 212 ::ffff:192.168.80.1EVENT 179 T=64 Event #179 <0x568fbb40>
05 09/06/15 9:37:29.004 Socket::ReceiveString2 ReceiveData failed m_Socket: -1 Incoming_Conn Socket 212 ::ffff:192.168.80.1EVENT 179 T=64 Event #179 <0x568fbb40>
05 09/06/15 9:37:29.005 TCPIP: Closing connection to 179 (Router Dev #0) 0x5e521058 m_Socket: -1 <0x568fbb40>
05 09/06/15 9:37:29.005 Router::RemoveAndDeleteSocket 0x5e521058 179 <0x568fbb40>
this is a log from motion_wrapper
./Motion_Wrapper -d 179 -r dcerouter
Motion_Wrapper, v.2.0.0.46.15082731292
Visit www.plutohome.com for source code and license information
01 09/06/15 9:41:45.730 Connect() Failed <0xb6f98700>
Segmentation fault (core dumped)
-
i make my motion_wrapper working.
Attached change I made
-
I wonder if that's really the right way of doing things. Shouldn't the config file really be in /etc/motion/ instead of /etc/motion/motion/?
To me this looks like the current motion package should be amended to look at the right place. Probably a configure prefix issue.
-
Stuff has been fixed. Another new motion packages is available.
Feedback is appreciated.
-
motion still not running.. it looks like lmce not writing proper conf files. when I run motion from terminal it grabs video0
and then I checked /etc/motion/motion and etc/motion and they say same thing .
-
please post the output of
dpkg -l | grep motion
-
dcerouter_1042085:~# dpkg -l | grep motion
ii motion 3.2.12+git20150610-lmce2~precise1 V4L capture program supporting motion detection
ii pluto-motion-wrapper 2.0.0.46.15082731292 <insert up to 60 chars description>
ii xserver-xorg-video-siliconmotion 1:1.7.5-1build2 X.Org X server -- SiliconMotion display driver
-
did you restart your system after apt-get upgrade'ing?
-
yeap rebooted
-
Posde ,
the new motion_wrapper package need to be generate ,
the motion_conf_path is wrong ned to add "/" on end
ticket #2441
-
We have a new pluto-motion-wrapper in the repository.
Testing and feedback is appreciated.
-
is working perfectly for me
Carlos
-
thx for testing and feedback.