LinuxMCE Forums
General => Users => Topic started by: pga57 on December 30, 2013, 10:37:54 am
-
Hi,
After doing a upgrade with the lastest pluto-boot-script and mce-diskless-tool (lmce 1004), audio over hdmi does not work anymore on 2 of my MDs (Ion and Ion2 motherboard).
I have try AVWizard to resolve those but have no success.
I also used the asound.conf.pbackup (it specifies the device in addition to the card, ex:plughw:0,3) on the MD but it does not solve anything.
Brief for the moment I do not understand what is happening.
Assistance would be welcome ;-)
Greetings
Philippe
-
Hi Philippe
What does aplay -l or aplay -L show you?
-
Hi,
aplay -l give me:
Ion motherboard
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 1: ALC662 rev1 Digital [ALC662 rev1 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
Ion2 motherboard:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: NVIDIA HDMI [NVIDIA HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: NVIDIA HDMI [NVIDIA HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: NVIDIA HDMI [NVIDIA HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
-
Hello. I changed everything. However everything should work now much better... not expecting things to NOT work. Esp going through AVWizard.
cat /etc/asound.conf
Paste here please.
Dropping into IRC would probably be very helpful, and a lot faster.
-
Hi,
I have no doubt that the changes needed to improve the system but for now it does not work for me. ;-)
Here the asound.conf for the 2 MDs:
Ion:
root@moon90:~# cat /etc/asound.conf
</etc/pluto/alsa/virtual_cards.conf>
pcm_slave.hdmi_convert48k {
pcm "plughw:0"
rate 48000
}
pcm.hdmi_playback {
type plug
slave hdmi_convert48k
}
pcm.asym_hdmi {
type asym
playback.pcm "hdmi_playback"
capture.pcm "plughw:0"
}
pcm.!default asym_hdmi
Ion2:
root@moon20:~# cat /etc/asound.conf
</etc/pluto/alsa/virtual_cards.conf>
pcm_slave.hdmi_convert48k {
pcm "plughw:"
rate 48000
}
pcm.hdmi_playback {
type plug
slave hdmi_convert48k
}
pcm.asym_hdmi {
type asym
playback.pcm "hdmi_playback"
capture.pcm "plughw:"
}
pcm.!default asym_hdmi
I've join the irc linuxmce channel (pga57)
Thank's for your help.
Philippe
-
I missed you.
I am here now. Something is going pretty wrong there.
Found it. Change line 284 from
if [[ "$AlternateSC" -ne "2" && "$AudioSetting" -ne "S" ]]; then
to
if [[ "$AlternateSC" -ne "2" && "$AudioSetting" != "S" ]]; then
Cannot do math with letters. DERP!
Your moon is weird... please make the change and take it through AVWiz again.
-
This is now solved. More things have been fixed. Everything should be happy happy happy. Repo will be updated in the next day or so.
Sorry for the breakage.