LinuxMCE Forums

General => Users => Topic started by: brent2009 on October 29, 2012, 04:59:18 am

Title: LinuxMCE 10.04 Gtalk Setup
Post by: brent2009 on October 29, 2012, 04:59:18 am
Hi, So I was able to get gtalk working in the past in Linuxmce 810 using FreePBX but now that freepbx isn't used anymore I'm confused on how to set this back up.

I see there is an option for phone lines now and tried using the gtalk option there but it always says disconnected?

Thanks for any assistance with this.
Title: Re: LinuxMCE 10.04 Gtalk Setup
Post by: l3mce on December 24, 2012, 06:20:20 pm
Riggs... or anyone really I guess... need your help testing if you don't mind. Trying to fix this today and tomorrow.
Title: Re: LinuxMCE 10.04 Gtalk Setup
Post by: huh on December 24, 2012, 07:40:29 pm
[On IRCote author=l3mce link=topic=12953.msg94363#msg94363 date=1356369620]
Riggs... or anyone really I guess... need your help testing if you don't mind. Trying to fix this today and tomorrow.
[/quote]

I can test. Will try to get on IRC soon
Title: Re: LinuxMCE 10.04 Gtalk Setup
Post by: cfernandes on December 24, 2012, 07:42:00 pm
hi ,

after a complete reinstall (internet install)  , i try to use gtalk .


i configured  and work  with somes ajusts.  db_phone_config.sh

you need to configure username with  your complete  account  with  "@gmail.com"

please try and let me know if you have any problem.

Title: Re: LinuxMCE 10.04 Gtalk Setup
Post by: Riggs on December 24, 2012, 08:55:28 pm
I've been playing with this for weeks and I have got no where.
As for filling out the username with @gmail.com does not change a damn thing, as for it saving the settings it is hit and miss
Title: Re: LinuxMCE 10.04 Gtalk Setup
Post by: cfernandes on December 24, 2012, 09:05:22 pm
my config
Title: Re: LinuxMCE 10.04 Gtalk Setup
Post by: Riggs on December 24, 2012, 09:41:39 pm
it looks like you are putting your username in the phone number section
Title: Re: LinuxMCE 10.04 Gtalk Setup
Post by: cfernandes on December 24, 2012, 09:59:34 pm
yeap
Title: Re: LinuxMCE 10.04 Gtalk Setup
Post by: Riggs on December 24, 2012, 10:32:51 pm
So we don't enter a phone number..
There needs to be a HowTo for this or the script needs to change to allow for the correct values.
Title: Re: LinuxMCE 10.04 Gtalk Setup
Post by: cfernandes on December 24, 2012, 10:43:48 pm
this is how to work for me.
i don't have gtalk number.

try configuring username on the phone number. i will check this script after christmas .

cfernandes
Title: Re: LinuxMCE 10.04 Gtalk Setup
Post by: Riggs on December 24, 2012, 11:34:36 pm
Ok after putting the username in the phone number filed, it show connected but i can not make outgoing calls, they just ring endlessly.

asterisk log full:
[Dec 24 16:25:23] NOTICE[23736] iax2-provision.c: No IAX provisioning configuration found, IAX provisioning disabled.
[Dec 24 16:26:18] VERBOSE[25259] chan_gtalk.c: OOOOH domain = riggsusa
[Dec 24 16:27:00] VERBOSE[26875] chan_gtalk.c: OOOOH domain = riggsusa
[Dec 24 16:27:50] WARNING[2379] chan_sip.c: No valid transports available, falling back to 'udp'.
[Dec 24 16:27:50] NOTICE[28066] chan_iax2.c: Ignoring bindport on reload
[Dec 24 16:27:50] NOTICE[28066] chan_iax2.c: Ignoring bindaddr on reload
[Dec 24 16:27:50] NOTICE[28066] iax2-provision.c: No IAX provisioning configuration found, IAX provisioning disabled.
[Dec 24 16:28:19] WARNING[29142] pbx.c: Extension 'vmx', priority 54 in 'macro-vm', label 'vmxopts' already in use at priority 52
[Dec 24 16:28:19] WARNING[2379] chan_sip.c: No valid transports available, falling back to 'udp'.
[Dec 24 16:29:23] WARNING[30382] pbx.c: Extension 'vmx', priority 54 in 'macro-vm', label 'vmxopts' already in use at priority 52
[Dec 24 16:29:23] WARNING[2379] chan_sip.c: No valid transports available, falling back to 'udp'.
[Dec 24 16:29:25] VERBOSE[30388] chan_gtalk.c: OOOOH domain = riggsusa
Title: Re: LinuxMCE 10.04 Gtalk Setup
Post by: cfernandes on December 26, 2012, 01:35:38 pm
i have  make some test  and now i can  dial out

you need to setup  the name off line as gtalk

please try 
Title: Re: LinuxMCE 10.04 Gtalk Setup
Post by: Riggs on December 26, 2012, 05:37:20 pm
I put your patch in (db_phone_config.sh) now it does not show a status and i can not add a sip soft phone to test.
when i add a sip soft phone in the LMCE admin page, there is no profiled ext or password
Title: Re: LinuxMCE 10.04 Gtalk Setup
Post by: cfernandes on December 26, 2012, 05:50:36 pm
my db_phone_config.sh  is a replacement not a patch .



Title: Re: LinuxMCE 10.04 Gtalk Setup
Post by: Riggs on December 26, 2012, 06:03:17 pm
i just called it a patch , but what i did was remove the old and put in the new
Title: Re: LinuxMCE 10.04 Gtalk Setup
Post by: Riggs on December 26, 2012, 09:22:53 pm
Just an update.
I tried to call the Gvoice number, my sipsoft phone shows the call and i can answer it
but the caller hears ringing only then they get the Gtalk voicemail.
Title: Re: LinuxMCE 10.04 Gtalk Setup
Post by: cfernandes on December 28, 2012, 11:56:28 am
Hi Riggs,


i have make some test to google talk  and  i have some progress , you can test  and send me  logs


Carlos
Title: Re: LinuxMCE 10.04 Gtalk Setup
Post by: Riggs on December 28, 2012, 05:32:16 pm
heres some new logs, I attempted multiple outgoing calls with no success, they all hung up after 3 rings
Title: Re: LinuxMCE 10.04 Gtalk Setup
Post by: cfernandes on December 28, 2012, 05:45:42 pm
have you tried an incoming call?


where logs?
Title: Re: LinuxMCE 10.04 Gtalk Setup
Post by: l3mce on December 29, 2012, 09:57:58 pm
cfernandes, while the changes I made to General_Info_Plugin.cpp built on my end, it is breaking the build fluffy side as sFrom is not defined anywhere, just referenced in the change. Please advise. The monsters are angry with me.
Title: Re: LinuxMCE 10.04 Gtalk Setup
Post by: cfernandes on December 29, 2012, 11:28:01 pm
sorry for that .
i will check but I'm traveling at the moment.