LinuxMCE Forums
General => Users => Topic started by: Techstyle on September 30, 2012, 10:16:25 pm
-
Does anyone know how to set up the iPhone's VPN client to access LMCE?
if somebody can help me set it up I will write a Wiki page for it
-
I use a cisco 1900 series router for that. I can help with the config.
-
So you access the LMCE VPN with that device from another location?
I filled in the following info on the L2PT page:
Description: LMCE
Server: myserver.dyndns.com (my server name - at least this format)
Account: username
Password: my linuxmce password
secret: pre-shared key from the LMCE network page
Proxy: off
I still get a message along the lines of "the L2PT-VPN server is not responding" - any ideas?
-
Is this over 3g? I had this problem a while back and determined that my provider (rogers) charges $10/month to allow vpn access. Something's about port blocking (but not tcp or udp ports). My networking knowledge is lacking however.
-
I use the VPN to connect elsewhere via both wifi and 3/4G
-
hi
I use a buffalo adsl+2modem/router running ddwrt software which has openvpn
it works for me
-
So you are saying you do not use LMCE's VPN?
Does anybody use LinuxMCE's VPN with iPhone VPN Client? Or does anybody use LinuxMCEs CPN with any device client?
-
Hey,
cant provide useful information.
i noticed, when i check the checkbox in LMCE-Admin -> Wizard -> Basic Info -> Users -> Can connect via VPN and clicked on "save" the checkbox was disabled again after reload.
I made it work somehow, i think it was in the php.ini settings (sorry, cant remember :-/ ).
If you need this information, let me know :-) ...
I tried it serveral times to connect with my iPhone iPad or Mac, no luck at all ...
This is what i get, when connecting via Mac build-in VPN:
tail -f /var/log/auth.log
Oct 5 23:23:41 dcerouter sshd[13503]: pam_sm_authenticate: Called
Oct 5 23:23:41 dcerouter sshd[13503]: pam_sm_authenticate: username = [jochen]
Oct 5 23:23:41 dcerouter sshd[13503]: Accepted password for jochen from 192.168.80.131 port 56673 ssh2
Oct 5 23:23:41 dcerouter sshd[13503]: pam_unix(sshd:session): session opened for user jochen by (uid=0)
Oct 5 23:24:01 dcerouter CRON[13869]: pam_unix(cron:session): session opened for user root by (uid=0)
Oct 5 23:24:03 dcerouter CRON[13869]: pam_unix(cron:session): session closed for user root
If you need details for iPhone or iPad, again, let me know :-)
cheers,
ochorocho
-
nice ...
made VPN work somehow using this howto:
http://blog.riobard.com/2010/04/30/l2tp-over-ipsec-ubuntu
connection works locally using:
- OS X Mountain Lion
- iOS 5.0.1
Does not work on iOS 6 .... needs more testing.
-
nice. .... does now work on iOS 6 too ...
::)
Where can i find the templates to integrate my changes into LinuxMCE?
Thanks
ochorocho
-
Lat night I tried to get the system to work as describe in the link:
http://blog.riobard.com/2010/04/30/l2tp-over-ipsec-ubuntu (http://blog.riobard.com/2010/04/30/l2tp-over-ipsec-ubuntu)
Most of the config files in LMCE are identical to the ones in the Blog.
/etc/ipsec.secrets is slightly different:
LMCE
%any %any: PSK "YourSharedSecret"
the Blog
YOUR.SERVER.IP.ADDRESS %any: PSK "YourSharedSecret"
LMCE /etc/xl2tpd/xl2tpd.conf has an extra line:
name = LinuxMCE_VPN_Server
sudo ipsec verify
gave me a bunch of failures, these were resolved by running:
for each in /proc/sys/net/ipv4/conf/*
do
echo 0 > $each/accept_redirects
echo 0 > $each/send_redirects
done
I was looking to see if there were any tickets associated with the VPN and found that there was a change that Foxi352 did that should have addressed this:
http://svn.linuxmce.org/trac.cgi/changeset/24656 (http://svn.linuxmce.org/trac.cgi/changeset/24656)
at the end of all this I still do not have a working VPN
-
hm .... will check this tonight...
And wat else i have done to make it work for me...