LinuxMCE Forums
General => Installation issues => Topic started by: DragonK on June 20, 2010, 12:44:28 pm
-
Hi All,
I'm trying to get a Zotac mag hd-nd01 up and running as a MD.
Sat the whole day with it yesterday from 10am to 11pm. From what I've read on the forum and wiki today it might be the NIC thats not loaded properly. But it went through the initial boot and setup, rebooted and loads. Shows the "KUBUNTU" with blue progress bar, then when the AVWizard is suppose to start, just a black screen. Conected via VGA and HDMI. Rebooted the MD again same thing. Black screen.
Deleted the MD from Admin Website and now it stops at
init: .: line 1: can't open /tmp/net-eth0.conf
Kernel panic - no syncing: ...
That indicates it doesnt load the NIC's driver?
Thanx in Advance
Karel
-
Press 3 on your keyboard or remote and see if the avwiz pops up
Check the wiki for the avwizard resolution and connector settings.
http://wiki.linuxmce.org/index.php/AVWizard
HTH
Tim
-
Hey Tim,
At the moment of blank screen I didnt think of pressing "3". Now I'm stuck on
line 1: can't open /tmp/net-eth0.conf
I'm gonna sit with it tonight and post the out come.
Karel
-
I thought you were further along with your install.
Sounds like you have an Unrecognized nic.
http://wiki.linuxmce.com/index.php/Unrecognized_NIC
HTH
Tim
-
Hi All,
Thanx for your assistance Tim, but this I dont understand.........
Initial problem was black screen........
Then deleted the Md From Admin Page and then got "line 1: can't open /tmp/net-eth0.conf" which points to unregocnized NIC.
Followed the instruction on how to patch the R8168 driver.
That didnt work cause I couldnt find the "r8168.diff" file. So I called it quits on Saturday night.
And Last night was the first oppertunity I got to have a go at it again.
So.........
Swithced on the Core/Hybrid.....once booted switched on the MD (Zotac Mag)
It went through the process of Diskless_Setup.sh again. ???
MD rebooted and back to a black screen. I left it there and went to make a cup of coffee. Preparing myself for a late with this.
But as I got back into the study (with my coffee) the MD rebooted again, but this time it stopped at the AV Wizard.....
Went through it and all is working. Maybe it was the Coffee or did I just need patience........
All I need to do now is test the HDMI. I want audio and visual through HDMI.
WIll post outcome of that once its done.
Karel
-
My zotac did hdmi audio and video ootb (out of the box) just reboot with avwizard and change it.
Richard
-
Hi Richard,
Sorry for the late reply, but you have a Zotac MAG or Zotac Zbox? My HDMI video works, but is "sluggish" when playing a movie and no HDMI audio.
How would I know if my MD is loading the correct Nvidia drivers?
Thnx
Karel.
-
Hi,
in a terminal:cat /proc/driver/nvidia/version
br mathieu